[Tue May 28 21:03:05 2013] Detection parameters:
  Position = (287.3, 325.4) = 6 53 31.45 -23 39 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.4 +/- 19.8
  Background counts = 91.7
  Rate = 0.003 +/- 0.0005

[Tue May 28 21:03:05 2013] Off-axis axis estimate = 2.11'
[Tue May 28 21:03:22 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:22 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Tue May 28 21:03:22 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Tue May 28 21:03:22 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.48"
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src6.ximg exists
[Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src6.csv
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src6.csv
[Tue May 28 21:03:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue May 28 21:03:23 2013] Fit fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue May 28 21:03:34 2013] Source 11 is offset by 6.949419 and -2.262804 pixels which is larger than
2 X fitted extent = 0.921494 x 0.921494, not incorporating fit results
[Tue May 28 21:03:34 2013] Spatial fit model total counts = 492.999000, observed total counts = 493.000000
[Tue May 28 21:03:34 2013] Offset between fit and detection position for source 11 = 0.255075 pixels
[Tue May 28 21:03:34 2013] 493.834200 total counts/ 435.235000 bgd. counts: snr = 2.808858
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.255075 pixels
  Position = (287.2, 325.6) = 6 53 31.49 -23 39 23.4
  Extent = 4.2 (2.8-5.5)", rotation angle = 0
  Source counts = 58.6 +/- 22.2
  Background counts = 435.2
  Rate = 0.002 +/- 0.0006
[Tue May 28 21:03:34 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:34 2013] Assessing source extent using major axis lower bound
[Tue May 28 21:03:34 2013] Source does appear to be extended
[Tue May 28 21:03:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:03:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:44 2013] Initial guess for spatial extent in simple fitting = 4.19"
[Tue May 28 21:03:44 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.051
[Tue May 28 21:03:44 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 4.19"
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src6.csv
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src6.csv
[Tue May 28 21:03:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 28 21:03:45 2013] Fit fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue May 28 21:03:56 2013] Spatial fit model total counts = 493.279000, observed total counts = 493.000000
[Tue May 28 21:03:56 2013] Offset between fit and detection position for source 11 = 0.000145 pixels
[Tue May 28 21:03:56 2013] 494.028600 total counts/ 435.461000 bgd. counts: snr = 2.806615
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.000145 pixels
  Position = (287.2, 325.6) = 6 53 31.49 -23 39 23.4
  Extent = 4.2 (2.8-5.5)", rotation angle = 0
  Source counts = 58.6 +/- 22.2
  Background counts = 435.5
  Rate = 0.002 +/- 0.0006
[Tue May 28 21:03:56 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:56 2013] Assessing source extent using major axis lower bound
[Tue May 28 21:03:56 2013] Source does appear to be extended
[Tue May 28 21:03:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:04:11 2013] XMMSAS src. selection expression = ellipse(24936.764700, 28277.130400, 251.182807, 251.182807, 0.000000, X, Y)
[Tue May 28 21:04:11 2013] Not overwriting source region fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src.reg
[Tue May 28 21:04:11 2013] Extracting stamp from image fullrun_mos2_xmm0079570201_pi300-10000_cl_sm2.00.img.gz, (273, 311) - (302, 340)
[Tue May 28 21:04:11 2013] XMMSAS bgd. selection expression = annulus(24936.764700, 28277.130400, 418.638012, 837.276024, X, Y)
[Tue May 28 21:04:11 2013] Writing fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11.gif
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue May 28 21:04:11 2013] Mean detx,y = (936.65, -4172.99) 
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src.img and ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue May 28 21:04:11 2013] Setting source spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue May 28 21:04:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue May 28 21:08:40 2013] Not generating rmf since there are only 58 counts
[Tue May 28 21:08:40 2013] rmf not generated due to insufficient counts
[Tue May 28 21:10:51 2013] Updating aperture counts using extracted products
[Tue May 28 21:10:51 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 103.00
[Tue May 28 21:10:51 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 358.00
[Tue May 28 21:10:51 2013] Got source and background scale factors 200000.000000, 1641076.000000
[Tue May 28 21:10:51 2013] User source parameters:
  Position = (287.2, 325.6) = 6 53 31.49 -23 39 23.4
  Extent = 4.2 (2.8-5.5)", rotation angle = 0
  Source aperture counts = 59.4 +/- 11.2
  Background aperture counts = 43.6
  Rate = 0.002 +/- 0.0003

[Tue May 28 21:10:53 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 21:10:53 2013] Using photon index=1.80, rate=0.0016, arf fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11.arf
[Tue May 28 21:10:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 21:10:53 2013] Updating source flux to 2.4e-14
[Tue May 28 21:10:57 2013] Flag b found in src. 11 procflags, skipping spectral fitting
[Tue May 28 21:10:57 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 21:10:58 2013] xmm0079570201/analysis//spectral/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete