[Tue May 28 21:03:05 2013] Detection parameters:
  Position = (305.4, 365.6) = 6 53 25.74 -23 36 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.6 +/- 25.0
  Background counts = 84.1
  Rate = 0.01 +/- 0.001

[Tue May 28 21:03:05 2013] Off-axis axis estimate = 4.89'
[Tue May 28 21:03:22 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:22 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Tue May 28 21:03:22 2013] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.659
[Tue May 28 21:03:22 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.87"
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 28 21:03:23 2013] Fit fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 21:03:23 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 28 21:03:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 21:03:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:34 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.132478 pixels away
[Tue May 28 21:03:34 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:34 2013] Assessing source extent using major
[Tue May 28 21:03:34 2013] Source does appear to be extended
[Tue May 28 21:03:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:03:44 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Tue May 28 21:03:44 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Tue May 28 21:03:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.659
[Tue May 28 21:03:44 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.87"
[Tue May 28 21:03:44 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src1.csv
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src1.csv
[Tue May 28 21:03:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 21:03:45 2013] fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 28 21:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 21:03:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0079570201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:03:56 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.194204 pixels away
[Tue May 28 21:03:56 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:03:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:03:56 2013] Assessing source extent using major
[Tue May 28 21:03:56 2013] Source does appear to be extended
[Tue May 28 21:03:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:04:11 2013] XMMSAS src. selection expression = ellipse(26518.296631, 31755.095001, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 21:04:11 2013] Not overwriting source region fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src.reg
[Tue May 28 21:04:11 2013] Extracting stamp from image fullrun_mos2_xmm0079570201_pi300-10000_cl_sm2.00.img.gz, (268, 328) - (343, 403)
[Tue May 28 21:04:11 2013] XMMSAS bgd. selection expression = annulus(26518.296631, 31755.095001, 1087.500000, 2175.000000, X, Y) && !ellipse(27837.195200, 29677.128400, 380.380811, 380.380811, 0.000000, X, Y)
[Tue May 28 21:04:11 2013] Writing fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1.gif
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0079570201/products/events/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue May 28 21:04:11 2013] Mean detx,y = (3446.42, -7051.51) 
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0079570201/products/images/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0079570201/products/spectra/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue May 28 21:04:11 2013] Setting source spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 28 21:04:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 28 21:04:11 2013] ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0079570201/products/lightcurves/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue May 28 21:04:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 21:04:22 2013] rmf not generated due to insufficient counts
[Tue May 28 21:10:50 2013] Updating aperture counts using extracted products
[Tue May 28 21:10:50 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 406.00
[Tue May 28 21:10:50 2013] Total counts from fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1727.00
[Tue May 28 21:10:50 2013] Got source and background scale factors 1046284.000000, 10228559.000000
[Tue May 28 21:10:50 2013] User source parameters:
  Position = (305.4, 365.6) = 6 53 25.74 -23 36 36.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 229.3 +/- 21.2
  Background aperture counts = 176.7
  Rate = 0.006 +/- 0.0006

[Tue May 28 21:10:50 2013] Updating counts from extracted products
[Tue May 28 21:10:50 2013] Set source signif. to 229.34/13.29 = 17.26
[Tue May 28 21:10:53 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 21:10:53 2013] Using photon index=1.80, rate=0.00626, arf fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1.arf
[Tue May 28 21:10:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 21:10:53 2013] Updating source flux to 1.2e-13
[Tue May 28 21:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 21:10:58 2013] xmm0079570201/analysis//spectral/fullrun_mos2_xmm0079570201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete