[Wed May 29 00:55:39 2013] Detection parameters:
  Position = (405.8, 447.0) = 15 3 30.48 -41 43 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 812.5 +/- 54.9
  Background counts = 620.1
  Rate = 0.02 +/- 0.001

[Wed May 29 00:56:11 2013] Off-axis axis estimate = 13.29'
[Wed May 29 00:59:41 2013] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:41 2013] Initial guess for spatial extent in simple fitting = 13.07"
[Wed May 29 00:59:41 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Wed May 29 00:59:41 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 13.07"
[Wed May 29 00:59:45 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src59.ximg exists
[Wed May 29 00:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src59.csv
[Wed May 29 00:59:45 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed May 29 00:59:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src59.csv
[Wed May 29 00:59:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:48 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed May 29 00:59:48 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed May 29 00:59:48 2013] Fit fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Wed May 29 01:00:53 2013] Warning, spatial fit 59 centroid is now closest to src. 26
[Wed May 29 01:00:53 2013] Spatial fit model total counts = 11108.300000, observed total counts = 9468.000000
[Wed May 29 01:00:53 2013] Poor agreement between spatial fit and data for source 69
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 01:00:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:00:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:00:54 2013] Assessing source extent using major
[Wed May 29 01:00:54 2013] Source does appear to be extended
[Wed May 29 01:00:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:00:54 2013] Source is confused with source 20
[Wed May 29 01:03:17 2013] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:17 2013] Initial guess for spatial extent in simple fitting = 13.07"
[Wed May 29 01:03:17 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Wed May 29 01:03:17 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 13.07"
[Wed May 29 01:03:20 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src58.ximg exists
[Wed May 29 01:03:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src58.csv
[Wed May 29 01:03:20 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src58_1.ximg exists
[Wed May 29 01:03:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src58.csv
[Wed May 29 01:03:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:23 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Wed May 29 01:03:23 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Wed May 29 01:03:23 2013] Fit fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Wed May 29 01:04:39 2013] Source 69 is offset by 7.800821 and 1.112253 pixels which is larger than
2 X fitted extent = 1.551697 x 1.551697, not incorporating fit results
[Wed May 29 01:04:40 2013] Warning, spatial fit 58 centroid is now closest to src. 1
[Wed May 29 01:04:40 2013] Spatial fit model total counts = 11114.600000, observed total counts = 9468.000000
[Wed May 29 01:04:40 2013] Poor agreement between spatial fit and data for source 69
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 01:04:41 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:04:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:04:41 2013] Assessing source extent using major
[Wed May 29 01:04:41 2013] Source does appear to be extended
[Wed May 29 01:04:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:07:17 2013] XMMSAS src. selection expression = ellipse(35253.255402, 38842.023987, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 01:07:17 2013] Not overwriting source region fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_src.reg
[Wed May 29 01:07:17 2013] Extracting stamp from image fullrun_pn_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (368, 410) - (443, 485)
[Wed May 29 01:07:17 2013] XMMSAS bgd. selection expression = annulus(35253.255402, 38842.023987, 1087.500000, 2175.000000, X, Y) && !ellipse(34400.396000, 39973.274000, 1845.328053, 1845.328053, 0.000000, X, Y) && !ellipse(34632.920000, 39937.638000, 1467.416042, 1467.416042, 0.000000, X, Y) && !ellipse(35534.742000, 39683.428000, 1876.784054, 1876.784054, 0.000000, X, Y) && !ellipse(36181.334167, 38578.777832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.365875, 38846.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33187.414276, 37886.311676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35717.418000, 38018.180000, 2091.664060, 2091.664060, 0.000000, X, Y) && !ellipse(33653.305400, 37164.929200, 1473.056042, 1473.056042, 0.000000, X, Y) && !ellipse(35789.435913, 40069.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34650.056641, 37887.925934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36138.224457, 40741.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37633.428101, 39354.157898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38163.138306, 39287.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36958.886047, 37708.913239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35357.252899, 37626.846283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34987.603790, 36860.976532, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:07:17 2013] Writing fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69.gif
[Wed May 29 01:07:57 2013] ../../xmm0077340201/products/events/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_src.evt and ../../xmm0077340201/products/events/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.evt exist, delete to re-create
[Wed May 29 01:07:57 2013] Mean detx,y = (9667.60, -10290.55) 
[Wed May 29 01:07:57 2013] ../../xmm0077340201/products/images/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_src.img and ../../xmm0077340201/products/images/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.img exist, delete to re-create
[Wed May 29 01:07:57 2013] ../../xmm0077340201/products/spectra/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_src.pi and ../../xmm0077340201/products/spectra/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.pi exist, delete to re-create
[Wed May 29 01:07:57 2013] Setting source spectrum file to fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_src.pi.gz
[Wed May 29 01:07:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed May 29 01:07:57 2013] ../../xmm0077340201/products/lightcurves/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.lc exist, delete to re-create
[Wed May 29 01:09:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 01:09:37 2013] rmf not generated due to insufficient counts