[Wed May 29 00:55:32 2013] Detection parameters:
  Position = (396.0, 459.0) = 15 3 34.29 -41 42 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4476.1 +/- 88.1
  Background counts = 439.2
  Rate = 0.09 +/- 0.002

[Wed May 29 00:56:11 2013] Off-axis axis estimate = 13.62'
[Wed May 29 00:59:41 2013] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 00:59:41 2013] Initial guess for spatial extent in simple fitting = 13.24"
[Wed May 29 00:59:41 2013] source mask rpix=3.0, npix_max = 50, mask sum = 52, frac = 1.035
[Wed May 29 00:59:41 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.24"
[Wed May 29 00:59:43 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 29 00:59:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src11.csv
[Wed May 29 00:59:43 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 29 00:59:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src11.csv
[Wed May 29 00:59:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:47 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 29 00:59:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 29 00:59:47 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 29 00:59:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 29 00:59:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:00:52 2013] Spatial fit model total counts = 18205.400000, observed total counts = 15877.000000
[Wed May 29 01:00:52 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 01:00:52 2013] Spatial fit model total counts = 14137.100000, observed total counts = 14088.000000
[Wed May 29 01:00:52 2013] Offset between fit and detection position for source 14 = 5.389416 pixels
[Wed May 29 01:00:52 2013] Warning, changing simple spatial fit ID from 11 to 17
[Wed May 29 01:00:52 2013] 12676.850000 total counts/ 10552.300000 bgd. counts: snr = 20.682041
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 5.389416 pixels
  Position = (397.3, 464.2) = 15 3 33.80 -41 41 50.5
  Extent = 26.6 (26.6-26.6)", rotation angle = 0
  Source counts = 2124.6 +/- 112.6
  Background counts = 10552.3
  Rate = 0.07 +/- 0.004
[Wed May 29 01:00:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:00:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:00:54 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:00:54 2013] Source does appear to be extended
[Wed May 29 01:00:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:00:54 2013] Source is confused with source 1
[Wed May 29 01:03:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 01:03:17 2013] Initial guess for spatial extent in simple fitting = 26.60"
[Wed May 29 01:03:17 2013] source mask rpix=6.1, npix_max = 175, mask sum = 145, frac = 0.828
[Wed May 29 01:03:17 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 26.60"
[Wed May 29 01:03:18 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src11.ximg exists
[Wed May 29 01:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src11.csv
[Wed May 29 01:03:18 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed May 29 01:03:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src11.csv
[Wed May 29 01:03:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:21 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed May 29 01:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 29 01:03:21 2013] fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May 29 01:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 29 01:03:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:04:39 2013] Warning, spatial fit 11 centroid is now closest to src. 21
[Wed May 29 01:04:39 2013] Spatial fit model total counts = 56873.600000, observed total counts = 52834.000000
[Wed May 29 01:04:39 2013] Offset between fit and detection position for source 14 = 6.491967 pixels
[Wed May 29 01:04:39 2013] Warning, changing simple spatial fit ID from 11 to 17
[Wed May 29 01:04:39 2013] 49916.070000 total counts/ 41096.800000 bgd. counts: snr = 43.503944
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 6.491967 pixels
  Position = (400.5, 458.6) = 15 3 32.55 -41 42 15.0
  Extent = 24.0 (23.8-24.2)", rotation angle = 0
  Source counts = 8819.3 +/- 223.4
  Background counts = 41096.8
  Rate = 0.3 +/- 0.007
[Wed May 29 01:04:39 2013] Spatial fit model total counts = 22833.500000, observed total counts = 22746.000000
[Wed May 29 01:04:39 2013] Offset between fit and detection position for source 14 = 2.098856 pixels
[Wed May 29 01:04:39 2013] Warning, changing simple spatial fit ID from 17 to 19
[Wed May 29 01:04:39 2013] 21997.890000 total counts/ 20813.800000 bgd. counts: snr = 8.207465
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.098856 pixels
  Position = (398.6, 459.6) = 15 3 33.26 -41 42 10.5
  Extent = 18.3 (16.2-20.8)", rotation angle = 0
  Source counts = 1184.1 +/- 148.3
  Background counts = 20813.8
  Rate = 0.04 +/- 0.005
[Wed May 29 01:04:41 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:04:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:04:41 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:04:41 2013] Source does appear to be extended
[Wed May 29 01:04:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:06:58 2013] Counts = 1184.090000, rescaling region sizes by 2.000000
[Wed May 29 01:06:58 2013] XMMSAS src. selection expression = ellipse(34632.920000, 39937.638000, 2201.124063, 2201.124063, 0.000000, X, Y)
[Wed May 29 01:06:58 2013] Not overwriting source region fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_src.reg
[Wed May 29 01:06:58 2013] Extracting stamp from image fullrun_pn_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (272, 333) - (525, 586)
[Wed May 29 01:06:59 2013] XMMSAS bgd. selection expression = annulus(34632.920000, 39937.638000, 7337.080211, 14674.160422, X, Y) && !ellipse(34400.396000, 39973.274000, 1845.328053, 1845.328053, 0.000000, X, Y) && !ellipse(29812.346344, 33539.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28521.165400, 33325.117600, 856.280025, 856.280025, 0.000000, X, Y) && !ellipse(28316.752200, 32879.760000, 1221.648035, 1221.648035, 0.000000, X, Y) && !ellipse(28032.686600, 30353.036000, 1383.656040, 1383.656040, 0.000000, X, Y) && !ellipse(27640.612030, 29272.751465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26976.444200, 28103.711800, 1193.392034, 1193.392034, 0.000000, X, Y) && !ellipse(34441.703217, 27605.849731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.791261, 26917.371151, 5555.304160, 2488.497909, 113.033245, X, Y) && !ellipse(26458.932999, 26304.518248, 2147.184062, 880.398553, 291.528661, X, Y) && !ellipse(26380.858800, 25549.104460, 1073.592031, 1073.592031, 0.000000, X, Y) && !ellipse(30645.752075, 24529.894745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30219.123800, 34006.558000, 1650.720047, 748.731222, 131.155000, X, Y) && !ellipse(28745.844971, 33782.220490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.166000, 24858.666000, 6441.552185, 6441.552185, 0.000000, X, Y) && !ellipse(31695.062000, 38796.258000, 1270.728037, 1270.728037, 0.000000, X, Y) && !ellipse(35534.742000, 39683.428000, 1876.784054, 1876.784054, 0.000000, X, Y) && !ellipse(36181.334167, 38578.777832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.365875, 38846.035736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31637.716156, 38233.324005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30352.188141, 38134.498505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33187.414276, 37886.311676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35717.418000, 38018.180000, 2091.664060, 2091.664060, 0.000000, X, Y) && !ellipse(30224.277600, 37553.494000, 1818.384052, 1818.384052, 0.000000, X, Y) && !ellipse(33653.305400, 37164.929200, 1473.056042, 1473.056042, 0.000000, X, Y) && !ellipse(31109.254000, 37711.374000, 1934.040056, 1934.040056, 0.000000, X, Y) && !ellipse(30076.346527, 37007.964264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30792.843600, 36581.582000, 713.644021, 713.644021, 0.000000, X, Y) && !ellipse(29618.754000, 36498.828000, 1813.392052, 1813.392052, 0.000000, X, Y) && !ellipse(30990.764000, 34913.144000, 1745.896050, 1745.896050, 0.000000, X, Y) && !ellipse(30250.755402, 35187.877960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29564.778137, 35014.852356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28403.176270, 31360.294800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.034540, 31492.712000, 1426.024041, 525.031215, 99.695420, X, Y) && !ellipse(28237.941200, 30905.883000, 2180.896063, 536.360815, 292.898600, X, Y) && !ellipse(30074.742889, 31879.254791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.128113, 29002.137604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27813.048218, 28272.039062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35755.464813, 25420.994263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35839.005310, 24732.630127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.964000, 23240.232000, 7164.768206, 7164.768206, 0.000000, X, Y) && !ellipse(35789.435913, 40069.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35253.255402, 38842.023987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34650.056641, 37887.925934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30224.313965, 30584.359833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30502.170746, 27892.122955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.083740, 26925.586090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29154.278000, 26431.840000, 1234.216036, 1234.216036, 0.000000, X, Y) && !ellipse(36138.224457, 40741.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37633.428101, 39354.157898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38163.138306, 39287.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36958.886047, 37708.913239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38913.412415, 37624.573578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35357.252899, 37626.846283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34987.603790, 36860.976532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38461.956543, 35180.451843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33926.916852, 33548.007838, 1744.152050, 1380.090487, 118.148059, X, Y) && !ellipse(38009.258118, 32049.904144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32903.914000, 30569.394000, 1566.104045, 611.077618, 32.207600, X, Y) && !ellipse(33680.697479, 30746.019257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36360.421204, 30091.227966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35707.461884, 30312.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33397.586395, 29884.164886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32918.894000, 30719.804000, 1566.104045, 1566.104045, 0.000000, X, Y) && !ellipse(37473.467896, 29451.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38013.997345, 28957.912781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35856.077148, 28740.003906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.830658, 28438.143005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34903.826996, 28301.217834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.851044, 28394.828857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35810.766418, 28241.474365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35583.023315, 27631.133575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34946.711029, 27712.778381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39424.524800, 26941.182200, 1917.560055, 1917.560055, 0.000000, X, Y) && !ellipse(35483.459717, 25908.152313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28563.954224, 25268.688507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35531.109528, 25158.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22900.659912, 25171.633911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32546.065399, 24661.985107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.769775, 31793.489380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37646.140381, 31614.460754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31785.657043, 31193.354523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20806.370148, 30875.388214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37100.948700, 30412.882111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34483.891632, 29919.882996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36249.188751, 29238.294495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36426.486298, 28579.818024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33337.147308, 28654.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33118.895935, 28223.829041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33132.643677, 27627.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37505.129120, 26194.035248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36730.128723, 25512.237000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32834.709564, 25219.530640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34091.512817, 24828.588196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33505.826630, 24926.696838, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:07:00 2013] Writing fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14.gif
[Wed May 29 01:07:42 2013] ../../xmm0077340201/products/events/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0077340201/products/events/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed May 29 01:07:43 2013] Mean detx,y = (9027.09, -10981.82) 
[Wed May 29 01:07:43 2013] ../../xmm0077340201/products/images/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_src.img and ../../xmm0077340201/products/images/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed May 29 01:07:43 2013] ../../xmm0077340201/products/spectra/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_src.pi and ../../xmm0077340201/products/spectra/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed May 29 01:07:43 2013] Setting source spectrum file to fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_src.pi.gz
[Wed May 29 01:07:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed May 29 01:07:43 2013] ../../xmm0077340201/products/lightcurves/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_pn_xmm0077340201_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create