[Wed May 29 00:57:00 2013] Detection parameters:
  Position = (309.8, 235.5) = 15 4 7.73 -41 58 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 438.7 +/- 35.6
  Background counts = 273.8
  Rate = 0.01 +/- 0.0008

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 4.64'
[Wed May 29 00:59:57 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed May 29 00:59:57 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 8.75"
[Wed May 29 01:00:00 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src83.ximg exists
[Wed May 29 01:00:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src83.csv
[Wed May 29 01:00:00 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src83_1.ximg exists
[Wed May 29 01:00:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src83.csv
[Wed May 29 01:00:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:00:06 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Wed May 29 01:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Wed May 29 01:00:06 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Wed May 29 01:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Wed May 29 01:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:02:02 2013] Warning, spatial fit 83 centroid is now closest to src. 89
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 90
[Wed May 29 01:03:37 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed May 29 01:03:37 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 8.75"
[Wed May 29 01:03:41 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src78.ximg exists
[Wed May 29 01:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src78.csv
[Wed May 29 01:03:41 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src78_1.ximg exists
[Wed May 29 01:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src78.csv
[Wed May 29 01:03:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:48 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Wed May 29 01:03:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.csv
[Wed May 29 01:03:48 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Wed May 29 01:03:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.csv
[Wed May 29 01:03:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:05:44 2013] Warning, spatial fit 78 centroid is now closest to src. 90
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:27 2013] XMMSAS src. selection expression = ellipse(26907.948730, 20442.051010, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 03:28:27 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src87_src.reg
[Wed May 29 03:28:27 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (272, 198) - (347, 273)
[Wed May 29 03:28:27 2013] XMMSAS bgd. selection expression = annulus(26907.948730, 20442.051010, 1087.500000, 2175.000000, X, Y) && !ellipse(26622.168000, 23266.400000, 1868.032054, 1868.032054, 0.000000, X, Y) && !ellipse(26394.700480, 22769.143600, 1242.192036, 630.216818, 98.478000, X, Y) && !ellipse(25592.745000, 22729.464000, 1021.928029, 1021.928029, 0.000000, X, Y) && !ellipse(25630.067200, 22396.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.958000, 19561.976000, 1495.480043, 1495.480043, 0.000000, X, Y) && !ellipse(26154.799225, 20301.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.507220, 21996.578000, 516.589615, 516.589615, 0.000000, X, Y) && !ellipse(27246.066000, 18503.349000, 1538.728044, 934.416027, 330.393000, X, Y) && !ellipse(26458.037400, 18197.743600, 1542.808044, 1542.808044, 0.000000, X, Y) && !ellipse(26477.353281, 17062.494135, 1620.268103, 788.992808, 68.250839, X, Y) && !ellipse(27004.084686, 21341.559006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.141205, 20308.123367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.180000, 18490.982000, 1495.288043, 1495.288043, 0.000000, X, Y) && !ellipse(26414.607000, 17195.518000, 1646.944047, 1646.944047, 0.000000, X, Y) && !ellipse(26761.561035, 18310.062485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.934174, 20407.126755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28283.391968, 21951.837402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.525085, 21550.553619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.509003, 18665.646576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.171844, 22380.329926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.205353, 17789.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28681.853455, 20566.417892, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:27 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src87.gif