[Wed May 29 00:56:59 2013] Detection parameters:
  Position = (295.2, 258.0) = 15 4 13.46 -41 56 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1302.5 +/- 52.8
  Background counts = 200.9
  Rate = 0.03 +/- 0.001

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 2.94'
[Wed May 29 00:59:57 2013] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 7.90"
[Wed May 29 00:59:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.90"
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src39.ximg exists
[Wed May 29 00:59:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src39.csv
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed May 29 00:59:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src39.csv
[Wed May 29 00:59:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed May 29 01:00:02 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed May 29 01:02:01 2013] Warning, spatial fit 39 centroid is now closest to src. 76
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 76
[Wed May 29 01:03:37 2013] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 7.90"
[Wed May 29 01:03:37 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.90"
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src35.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src35.csv
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src35.csv
[Wed May 29 01:03:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:44 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed May 29 01:03:44 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed May 29 01:03:44 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Wed May 29 01:05:44 2013] Source 79 is offset by 0.777030 and -8.860331 pixels which is larger than
2 X fitted extent = 3.503196 x 3.503196, not incorporating fit results
[Wed May 29 01:05:44 2013] Source 79 is offset by 7.419807 and 5.064612 pixels which is larger than
2 X fitted extent = 4.020129 x 4.020129, not incorporating fit results
[Wed May 29 01:05:44 2013] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 13.996037 pixels away
[Wed May 29 01:05:44 2013] Source 79 is offset by -8.154189 and 3.304508 pixels which is larger than
2 X fitted extent = 1.128253 x 1.128899, not incorporating fit results
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:20 2013] Counts = 1302.466797, rescaling region sizes by 2.000000
[Wed May 29 03:28:20 2013] XMMSAS src. selection expression = ellipse(25630.067200, 22396.921204, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 29 03:28:20 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src79_src.reg
[Wed May 29 03:28:20 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (220, 183) - (370, 333)
[Wed May 29 03:28:20 2013] XMMSAS bgd. selection expression = annulus(25630.067200, 22396.921204, 4350.000000, 8700.000000, X, Y) && !ellipse(26641.827600, 27093.591600, 1103.872032, 1103.872032, 0.000000, X, Y) && !ellipse(27030.228760, 28135.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.548706, 29625.480072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29117.046000, 32568.294000, 1761.920051, 1761.920051, 0.000000, X, Y) && !ellipse(34424.033997, 27675.677002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.234039, 30570.519165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29326.714000, 33067.206000, 2107.816061, 806.928023, 131.820100, X, Y) && !ellipse(27544.518200, 31322.418000, 1372.632039, 1372.632039, 0.000000, X, Y) && !ellipse(27723.164856, 31701.139496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26622.168000, 23266.400000, 1868.032054, 1868.032054, 0.000000, X, Y) && !ellipse(26394.700480, 22769.143600, 1242.192036, 630.216818, 98.478000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(25592.745000, 22729.464000, 1021.928029, 1021.928029, 0.000000, X, Y) && !ellipse(27269.446899, 24397.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29945.856000, 31599.102600, 1499.672043, 513.364015, 86.117000, X, Y) && !ellipse(25974.958000, 19561.976000, 1495.480043, 1495.480043, 0.000000, X, Y) && !ellipse(27778.224000, 23505.472000, 415.464012, 415.464012, 0.000000, X, Y) && !ellipse(30787.402000, 31958.599400, 1001.224029, 1001.224029, 0.000000, X, Y) && !ellipse(26154.799225, 20301.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.507220, 21996.578000, 516.589615, 516.589615, 0.000000, X, Y) && !ellipse(27246.066000, 18503.349000, 1538.728044, 934.416027, 330.393000, X, Y) && !ellipse(32375.357635, 16394.760193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.037400, 18197.743600, 1542.808044, 1542.808044, 0.000000, X, Y) && !ellipse(27927.421570, 25275.461487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.353281, 17062.494135, 1620.268103, 788.992808, 68.250839, X, Y) && !ellipse(27918.436951, 25966.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.084686, 21341.559006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.869993, 26049.391570, 1625.568047, 803.921010, 90.000000, X, Y) && !ellipse(28555.805939, 17358.587601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.141205, 20308.123367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29552.620600, 28987.079000, 594.579217, 594.579217, 0.000000, X, Y) && !ellipse(31196.527283, 14048.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.180000, 18490.982000, 1495.288043, 1495.288043, 0.000000, X, Y) && !ellipse(30251.451019, 30141.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.115723, 17186.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30943.616000, 29937.010000, 956.864028, 956.864028, 0.000000, X, Y) && !ellipse(26414.607000, 17195.518000, 1646.944047, 1646.944047, 0.000000, X, Y) && !ellipse(31754.962000, 16329.962000, 2253.008065, 1118.536032, 29.071400, X, Y) && !ellipse(26761.561035, 18310.062485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31330.566437, 16574.261414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.948730, 20442.051010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.359375, 24237.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.934174, 20407.126755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.924000, 25577.380000, 1162.144033, 1162.144033, 0.000000, X, Y) && !ellipse(28283.391968, 21951.837402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30965.055000, 14839.358680, 1227.216035, 893.104026, 344.676000, X, Y) && !ellipse(28463.525085, 21550.553619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.509003, 18665.646576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30990.574680, 19989.061600, 716.007221, 716.007221, 0.000000, X, Y) && !ellipse(33930.796000, 19359.474000, 1734.816050, 1734.816050, 0.000000, X, Y) && !ellipse(28171.171844, 22380.329926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30028.254600, 26474.368600, 547.827216, 547.827216, 0.000000, X, Y) && !ellipse(32039.496429, 14229.421844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34653.866608, 21297.781555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.205353, 17789.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35101.849701, 19698.379959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19108.480240, 16057.145340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.216766, 30772.213776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28042.864899, 15080.584412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31749.030914, 13171.848007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28681.853455, 20566.417892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31269.816711, 17157.743927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34394.103851, 22040.194122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34440.463318, 20838.364578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.807709, 16922.363632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30169.238037, 17548.269531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.962494, 31789.990051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34298.079407, 19961.955338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28688.371552, 16306.273376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29801.731537, 15893.968567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29504.012482, 14047.851028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30021.044922, 27704.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32769.841888, 30575.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31767.985168, 30315.264648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32589.809662, 24571.432678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32930.601257, 22228.133026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32217.800232, 30902.875732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28930.324371, 14048.087326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.854065, 29959.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.889160, 23546.113464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30046.955353, 20843.759598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35090.268463, 12998.396271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.092163, 14445.739029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32786.871246, 14563.160355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34034.851837, 15179.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33611.624237, 14098.570053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29814.637634, 13439.833389, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:20 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src79.gif
[Wed May 29 05:26:24 2013] Mean detx,y = (1484.34, -5058.00) 
[Wed May 29 05:26:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 05:28:22 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 05:28:22 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Wed May 29 05:28:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src79_bgd.pi.gz