[Wed May 29 00:56:58 2013] Detection parameters:
  Position = (295.2, 264.0) = 15 4 13.46 -41 56 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1451.0 +/- 54.5
  Background counts = 200.5
  Rate = 0.03 +/- 0.001

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 2.51'
[Wed May 29 00:59:57 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Wed May 29 00:59:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 7.68"
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src35.ximg exists
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May 29 00:59:59 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src35 appears to have run properly
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May 29 01:00:02 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed May 29 01:02:01 2013] Spatial fit model total counts = 8490.580000, observed total counts = 7801.000000
[Wed May 29 01:02:01 2013] Offset between fit and detection position for source 76 = 3.058767 pixels
[Wed May 29 01:02:01 2013] 8802.068000 total counts/ 8315.000000 bgd. counts: snr = 5.341441
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 3.058767 pixels
  Position = (293.9, 261.2) = 15 4 13.95 -41 56 33.9
  Extent = 14.8" x 4.2", rotation angle = 100
  Source counts = 487.1 +/- 93.8
  Background counts = 8315.0
  Rate = 0.009 +/- 0.002
[Wed May 29 01:02:01 2013] Spatial fit model total counts = 7613.980000, observed total counts = 7614.000000
[Wed May 29 01:02:01 2013] Offset between fit and detection position for source 76 = 1.027318 pixels
[Wed May 29 01:02:01 2013] Warning, changing simple spatial fit ID from 35 to 39
[Wed May 29 01:02:01 2013] 7607.580000 total counts/ 6705.540000 bgd. counts: snr = 11.015619
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 1.027318 pixels
  Position = (294.7, 261.8) = 15 4 13.63 -41 56 31.3
  Extent = 12.8 (10.6-15.8)", rotation angle = 0
  Source counts = 902.0 +/- 87.2
  Background counts = 6705.5
  Rate = 0.02 +/- 0.002
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 84
[Wed May 29 01:02:02 2013] Source is confused with source 79
[Wed May 29 01:03:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Wed May 29 01:03:37 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 12.77"
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src31.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src31.csv
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src31.csv
[Wed May 29 01:03:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:44 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed May 29 01:03:44 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed May 29 01:03:44 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed May 29 01:05:44 2013] Warning, spatial fit 31 centroid is now closest to src. 74
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:20 2013] XMMSAS src. selection expression = ellipse(25592.745000, 22729.464000, 766.446022, 766.446022, 0.000000, X, Y)
[Wed May 29 03:28:20 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src76_src.reg
[Wed May 29 03:28:20 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (251, 218) - (339, 306)
[Wed May 29 03:28:20 2013] XMMSAS bgd. selection expression = annulus(25592.745000, 22729.464000, 1277.410037, 2554.820074, X, Y) && !ellipse(26622.168000, 23266.400000, 1868.032054, 1868.032054, 0.000000, X, Y) && !ellipse(26394.700480, 22769.143600, 1242.192036, 630.216818, 98.478000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(27269.446899, 24397.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25630.067200, 22396.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.958000, 19561.976000, 1495.480043, 1495.480043, 0.000000, X, Y) && !ellipse(27778.224000, 23505.472000, 415.464012, 415.464012, 0.000000, X, Y) && !ellipse(26154.799225, 20301.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.507220, 21996.578000, 516.589615, 516.589615, 0.000000, X, Y) && !ellipse(27927.421570, 25275.461487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.436951, 25966.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.084686, 21341.559006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.869993, 26049.391570, 1625.568047, 803.921010, 90.000000, X, Y) && !ellipse(27350.141205, 20308.123367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.948730, 20442.051010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.359375, 24237.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.934174, 20407.126755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.924000, 25577.380000, 1162.144033, 1162.144033, 0.000000, X, Y) && !ellipse(28283.391968, 21951.837402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.525085, 21550.553619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.171844, 22380.329926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28681.853455, 20566.417892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.889160, 23546.113464, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:20 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src76.gif
[Wed May 29 05:22:52 2013] Mean detx,y = (1683.30, -4776.05) 
[Wed May 29 05:22:53 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 05:23:19 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 05:23:20 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Wed May 29 05:23:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src76_bgd.pi.gz