[Wed May 29 00:56:58 2013] Detection parameters:
  Position = (317.5, 270.1) = 15 4 4.74 -41 55 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1112.5 +/- 53.8
  Background counts = 316.4
  Rate = 0.02 +/- 0.001

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 2.48'
[Wed May 29 00:59:57 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Wed May 29 00:59:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.977
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 7.67"
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src47.ximg exists
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed May 29 00:59:59 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src47 appears to have run properly
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed May 29 01:00:02 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Wed May 29 01:02:01 2013] Spatial fit model total counts = 9177.450000, observed total counts = 8642.000000
[Wed May 29 01:02:01 2013] Offset between fit and detection position for source 73 = 2.418499 pixels
[Wed May 29 01:02:01 2013] 8966.752000 total counts/ 8685.510000 bgd. counts: snr = 3.017745
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 2.418499 pixels
  Position = (319.8, 270.7) = 15 4 3.83 -41 55 52.5
  Extent = 5.2 (3.2-7.4)", rotation angle = 0
  Source counts = 281.2 +/- 94.7
  Background counts = 8685.5
  Rate = 0.005 +/- 0.002
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 157
[Wed May 29 01:03:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 5.19"
[Wed May 29 01:03:37 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.784
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 5.19"
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src43.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src43.csv
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src43.csv
[Wed May 29 01:03:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:45 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed May 29 01:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed May 29 01:03:45 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed May 29 01:03:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed May 29 01:03:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:05:44 2013] Warning, spatial fit 43 centroid is now closest to src. 157
[Wed May 29 01:05:45 2013] Source 73 is offset by 3.365448 and 6.140897 pixels which is larger than
2 X fitted extent = 5.091954 x 5.091954, not incorporating fit results
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:22 2013] XMMSAS src. selection expression = ellipse(27778.224000, 23505.472000, 311.598009, 311.598009, 0.000000, X, Y)
[Wed May 29 03:28:22 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src73_src.reg
[Wed May 29 03:28:22 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (302, 253) - (338, 289)
[Wed May 29 03:28:22 2013] XMMSAS bgd. selection expression = annulus(27778.224000, 23505.472000, 519.330015, 1038.660030, X, Y) && !ellipse(26622.168000, 23266.400000, 1868.032054, 1868.032054, 0.000000, X, Y) && !ellipse(26394.700480, 22769.143600, 1242.192036, 630.216818, 98.478000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(27269.446899, 24397.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.507220, 21996.578000, 516.589615, 516.589615, 0.000000, X, Y) && !ellipse(27927.421570, 25275.461487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.869993, 26049.391570, 1625.568047, 803.921010, 90.000000, X, Y) && !ellipse(28010.359375, 24237.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.924000, 25577.380000, 1162.144033, 1162.144033, 0.000000, X, Y) && !ellipse(28283.391968, 21951.837402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.171844, 22380.329926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.889160, 23546.113464, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:22 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src73.gif
[Wed May 29 05:40:59 2013] Mean detx,y = (-361.77, -4219.46) 
[Wed May 29 05:41:01 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 05:41:15 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 05:41:15 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed May 29 05:41:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src73_bgd.pi.gz