[Wed May 29 00:56:55 2013] Detection parameters:
  Position = (348.3, 347.0) = 15 3 52.78 -41 50 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 561.1 +/- 41.4
  Background counts = 520.9
  Rate = 0.01 +/- 0.0009

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 5.05'
[Wed May 29 00:59:57 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Wed May 29 00:59:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.070
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 8.95"
[Wed May 29 01:00:00 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src73.ximg exists
[Wed May 29 01:00:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src73.csv
[Wed May 29 01:00:00 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src73_1.ximg exists
[Wed May 29 01:00:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src73.csv
[Wed May 29 01:00:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:00:06 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Wed May 29 01:00:06 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Wed May 29 01:00:06 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Wed May 29 01:02:02 2013] Warning, spatial fit 73 centroid is now closest to src. 58
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 61
[Wed May 29 01:03:37 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Wed May 29 01:03:37 2013] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.070
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 8.95"
[Wed May 29 01:03:41 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src68.ximg exists
[Wed May 29 01:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src68.csv
[Wed May 29 01:03:41 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src68_1.ximg exists
[Wed May 29 01:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src68.csv
[Wed May 29 01:03:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:47 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Wed May 29 01:03:47 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Wed May 29 01:03:47 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Wed May 29 01:05:44 2013] Warning, spatial fit 68 centroid is now closest to src. 61
[Wed May 29 01:05:44 2013] Source 60 is offset by 4.905184 and -8.285100 pixels which is larger than
2 X fitted extent = 5.530161 x 5.530161, not incorporating fit results
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:26 2013] XMMSAS src. selection expression = ellipse(30251.451019, 30141.798309, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 03:28:26 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src60_src.reg
[Wed May 29 03:28:26 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (311, 310) - (386, 385)
[Wed May 29 03:28:26 2013] XMMSAS bgd. selection expression = annulus(30251.451019, 30141.798309, 1087.500000, 2175.000000, X, Y) && !ellipse(27719.548706, 29625.480072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28430.283400, 33223.022000, 1524.704044, 589.262417, 114.421000, X, Y) && !ellipse(29117.046000, 32568.294000, 1761.920051, 1761.920051, 0.000000, X, Y) && !ellipse(28408.665400, 33044.814000, 1554.184045, 1554.184045, 0.000000, X, Y) && !ellipse(29718.922000, 33466.756000, 1559.528045, 548.290416, 312.085000, X, Y) && !ellipse(27653.234039, 30570.519165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29326.714000, 33067.206000, 2107.816061, 806.928023, 131.820100, X, Y) && !ellipse(27544.518200, 31322.418000, 1372.632039, 1372.632039, 0.000000, X, Y) && !ellipse(27723.164856, 31701.139496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(29945.856000, 31599.102600, 1499.672043, 513.364015, 86.117000, X, Y) && !ellipse(30307.676575, 32581.196747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30787.402000, 31958.599400, 1001.224029, 1001.224029, 0.000000, X, Y) && !ellipse(29552.620600, 28987.079000, 594.579217, 594.579217, 0.000000, X, Y) && !ellipse(30943.616000, 29937.010000, 956.864028, 956.864028, 0.000000, X, Y) && !ellipse(31555.962494, 31789.990051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30021.044922, 27704.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32769.841888, 30575.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31767.985168, 30315.264648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32217.800232, 30902.875732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.854065, 29959.145569, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:26 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src60.gif
[Wed May 29 06:11:51 2013] Mean detx,y = (-3534.94, 2156.75) 
[Wed May 29 06:11:53 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 06:12:14 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 06:12:15 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed May 29 06:12:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src60_bgd.pi.gz