[Wed May 29 00:56:53 2013] Detection parameters:
  Position = (339.4, 417.0) = 15 3 56.26 -41 45 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1499.9 +/- 52.6
  Background counts = 176.1
  Rate = 0.05 +/- 0.002

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 9.10'
[Wed May 29 00:59:57 2013] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 10.98"
[Wed May 29 00:59:57 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.98"
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 29 00:59:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src17.csv
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 29 00:59:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src17.csv
[Wed May 29 00:59:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:00:01 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 29 01:00:01 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 29 01:00:01 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed May 29 01:02:01 2013] Spatial fit model total counts = 7203.550000, observed total counts = 7188.000000
[Wed May 29 01:02:01 2013] Offset between fit and detection position for source 40 = 1.981794 pixels
[Wed May 29 01:02:01 2013] 6920.080000 total counts/ 6045.160000 bgd. counts: snr = 11.252900
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.981794 pixels
  Position = (339.7, 419.0) = 15 3 56.15 -41 45 7.5
  Extent = 10.4 (9.3-11.8)", rotation angle = 0
  Source counts = 874.9 +/- 83.2
  Background counts = 6045.2
  Rate = 0.02 +/- 0.002
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 35
[Wed May 29 01:03:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Wed May 29 01:03:37 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.35"
[Wed May 29 01:03:38 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src17.ximg exists
[Wed May 29 01:03:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src17.csv
[Wed May 29 01:03:38 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed May 29 01:03:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src17.csv
[Wed May 29 01:03:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:43 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed May 29 01:03:43 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed May 29 01:03:43 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed May 29 01:05:43 2013] Warning, spatial fit 17 centroid is now closest to src. 45
[Wed May 29 01:05:44 2013] Spatial fit model total counts = 25461.700000, observed total counts = 25433.000000
[Wed May 29 01:05:44 2013] Offset between fit and detection position for source 40 = 4.369121 pixels
[Wed May 29 01:05:44 2013] Warning, changing simple spatial fit ID from 17 to 26
[Wed May 29 01:05:44 2013] 25969.190000 total counts/ 21663.600000 bgd. counts: snr = 29.252794
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.369121 pixels
  Position = (341.1, 414.9) = 15 3 55.61 -41 45 25.5
  Extent = 26.5 (24.8-28.2)", rotation angle = 0
  Source counts = 4305.6 +/- 161.1
  Background counts = 21663.6
  Rate = 0.08 +/- 0.003
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:17 2013] Counts = 4305.590000, rescaling region sizes by 2.000000
[Wed May 29 03:28:17 2013] XMMSAS src. selection expression = ellipse(29622.926000, 36043.506000, 3175.008091, 3175.008091, 0.000000, X, Y)
[Wed May 29 03:28:17 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src40_src.reg
[Wed May 29 03:28:17 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (159, 232) - (524, 595)
[Wed May 29 03:28:18 2013] XMMSAS bgd. selection expression = annulus(29622.926000, 36043.506000, 10583.360305, 21166.720609, X, Y) && !ellipse(26641.827600, 27093.591600, 1103.872032, 1103.872032, 0.000000, X, Y) && !ellipse(27030.228760, 28135.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.548706, 29625.480072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28430.283400, 33223.022000, 1524.704044, 589.262417, 114.421000, X, Y) && !ellipse(29117.046000, 32568.294000, 1761.920051, 1761.920051, 0.000000, X, Y) && !ellipse(28408.665400, 33044.814000, 1554.184045, 1554.184045, 0.000000, X, Y) && !ellipse(34424.033997, 27675.677002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29718.922000, 33466.756000, 1559.528045, 548.290416, 312.085000, X, Y) && !ellipse(30332.028700, 34093.414000, 693.420020, 693.420020, 0.000000, X, Y) && !ellipse(33277.296000, 39526.550000, 2087.616060, 2087.616060, 0.000000, X, Y) && !ellipse(27653.234039, 30570.519165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29326.714000, 33067.206000, 2107.816061, 806.928023, 131.820100, X, Y) && !ellipse(29282.381256, 34937.673309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.518200, 31322.418000, 1372.632039, 1372.632039, 0.000000, X, Y) && !ellipse(27723.164856, 31701.139496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26622.168000, 23266.400000, 1868.032054, 1868.032054, 0.000000, X, Y) && !ellipse(31733.666260, 37103.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.792000, 35095.570000, 1610.752046, 440.039213, 343.289000, X, Y) && !ellipse(29202.637451, 35617.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29881.164800, 35574.635600, 1251.400036, 1251.400036, 0.000000, X, Y) && !ellipse(32817.672000, 36398.755800, 1999.728058, 1999.728058, 0.000000, X, Y) && !ellipse(32749.321167, 39277.570923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26394.700480, 22769.143600, 1242.192036, 630.216818, 98.478000, X, Y) && !ellipse(31235.088000, 37768.686000, 3286.192095, 3286.192095, 0.000000, X, Y) && !ellipse(29966.340000, 37053.712000, 1863.512054, 1863.512054, 0.000000, X, Y) && !ellipse(30371.368000, 34929.020000, 1702.728049, 1702.728049, 0.000000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(31356.376000, 38499.902000, 1980.120057, 1980.120057, 0.000000, X, Y) && !ellipse(25592.745000, 22729.464000, 1021.928029, 1021.928029, 0.000000, X, Y) && !ellipse(27269.446899, 24397.772522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29945.856000, 31599.102600, 1499.672043, 513.364015, 86.117000, X, Y) && !ellipse(25630.067200, 22396.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.663200, 37956.911400, 752.212822, 752.212822, 0.000000, X, Y) && !ellipse(30068.283203, 37530.707672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34916.278000, 39437.878000, 1433.856041, 1433.856041, 0.000000, X, Y) && !ellipse(25974.958000, 19561.976000, 1495.480043, 1495.480043, 0.000000, X, Y) && !ellipse(32113.446000, 38812.716000, 2029.120058, 2029.120058, 0.000000, X, Y) && !ellipse(30307.676575, 32581.196747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31036.344055, 35538.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27778.224000, 23505.472000, 415.464012, 415.464012, 0.000000, X, Y) && !ellipse(30787.402000, 31958.599400, 1001.224029, 1001.224029, 0.000000, X, Y) && !ellipse(32947.699646, 38324.293274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31996.371020, 37926.930000, 1643.096047, 1643.096047, 0.000000, X, Y) && !ellipse(26154.799225, 20301.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36655.602000, 40284.678400, 2189.888063, 2189.888063, 0.000000, X, Y) && !ellipse(27810.507220, 21996.578000, 516.589615, 516.589615, 0.000000, X, Y) && !ellipse(27246.066000, 18503.349000, 1538.728044, 934.416027, 330.393000, X, Y) && !ellipse(31639.564056, 34296.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32375.357635, 16394.760193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.037400, 18197.743600, 1542.808044, 1542.808044, 0.000000, X, Y) && !ellipse(33180.804000, 36825.870000, 1939.384056, 1939.384056, 0.000000, X, Y) && !ellipse(27927.421570, 25275.461487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.353281, 17062.494135, 1620.268103, 788.992808, 68.250839, X, Y) && !ellipse(27918.436951, 25966.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40650.098938, 19022.157272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.084686, 21341.559006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.869993, 26049.391570, 1625.568047, 803.921010, 90.000000, X, Y) && !ellipse(28555.805939, 17358.587601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.141205, 20308.123367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29552.620600, 28987.079000, 594.579217, 594.579217, 0.000000, X, Y) && !ellipse(37615.647369, 22657.329132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37900.696625, 40148.630280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31196.527283, 14048.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.180000, 18490.982000, 1495.288043, 1495.288043, 0.000000, X, Y) && !ellipse(30251.451019, 30141.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33988.866730, 37884.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.115723, 17186.795258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30943.616000, 29937.010000, 956.864028, 956.864028, 0.000000, X, Y) && !ellipse(35546.634000, 38132.764400, 1608.464046, 1608.464046, 0.000000, X, Y) && !ellipse(26414.607000, 17195.518000, 1646.944047, 1646.944047, 0.000000, X, Y) && !ellipse(31754.962000, 16329.962000, 2253.008065, 1118.536032, 29.071400, X, Y) && !ellipse(36947.400391, 22309.116730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26761.561035, 18310.062485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31330.566437, 16574.261414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.948730, 20442.051010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37360.475159, 21365.107788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.359375, 24237.554779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38333.824829, 39447.450317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.934174, 20407.126755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.924000, 25577.380000, 1162.144033, 1162.144033, 0.000000, X, Y) && !ellipse(35981.174000, 38184.265200, 3198.008092, 1782.752051, 325.283600, X, Y) && !ellipse(28283.391968, 21951.837402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.594788, 38058.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35597.602081, 24213.786957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35646.696228, 39111.371399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30965.055000, 14839.358680, 1227.216035, 893.104026, 344.676000, X, Y) && !ellipse(28463.525085, 21550.553619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.509003, 18665.646576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35561.885200, 20911.464200, 869.280025, 869.280025, 0.000000, X, Y) && !ellipse(30990.574680, 19989.061600, 716.007221, 716.007221, 0.000000, X, Y) && !ellipse(35638.054108, 23524.387360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33930.796000, 19359.474000, 1734.816050, 1734.816050, 0.000000, X, Y) && !ellipse(28171.171844, 22380.329926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35633.252420, 25129.206000, 812.248023, 812.248023, 0.000000, X, Y) && !ellipse(34427.127106, 37191.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30028.254600, 26474.368600, 547.827216, 547.827216, 0.000000, X, Y) && !ellipse(39261.802704, 26841.156158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35216.177917, 19268.436462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32039.496429, 14229.421844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34653.866608, 21297.781555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25849.205353, 17789.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35960.626892, 22926.713715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36708.238007, 23706.779907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.167725, 37455.642029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37177.681702, 23181.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35101.849701, 19698.379959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19108.480240, 16057.145340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37724.715973, 21009.933899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36096.941406, 24556.455658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.216766, 30772.213776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36457.369598, 19170.927856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28042.864899, 15080.584412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36968.608765, 20322.246796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28681.853455, 20566.417892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31269.816711, 17157.743927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36777.744019, 21436.960846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34394.103851, 22040.194122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34440.463318, 20838.364578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.807709, 16922.363632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30169.238037, 17548.269531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31555.962494, 31789.990051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34298.079407, 19961.955338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28688.371552, 16306.273376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29801.731537, 15893.968567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.996918, 33436.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36748.156372, 24475.615326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29504.012482, 14047.851028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30021.044922, 27704.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32769.841888, 30575.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31767.985168, 30315.264648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32589.809662, 24571.432678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32930.601257, 22228.133026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32217.800232, 30902.875732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36076.418030, 23702.213257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36795.899109, 38063.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28930.324371, 14048.087326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.854065, 29959.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.889160, 23546.113464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38658.763245, 16126.728348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30046.955353, 20843.759598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.092163, 14445.739029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13938.433289, 33467.498627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32786.871246, 14563.160355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43719.883636, 25689.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38513.434906, 38330.296295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34034.851837, 15179.991364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33611.624237, 14098.570053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40788.250732, 34671.458832, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:18 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src40.gif
[Wed May 29 04:36:21 2013] Mean detx,y = (-4192.30, 7484.62) 
[Wed May 29 04:36:25 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 04:42:55 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 04:42:55 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed May 29 04:42:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src40_bgd.pi.gz