[Wed May 29 00:56:50 2013] Detection parameters:
  Position = (369.0, 437.0) = 15 3 44.75 -41 43 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1100.3 +/- 51.1
  Background counts = 239.5
  Rate = 0.02 +/- 0.0009

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 11.28'
[Wed May 29 00:59:57 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 12.07"
[Wed May 29 00:59:57 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.840
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 12.07"
[Wed May 29 01:00:00 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src50.ximg exists
[Wed May 29 01:00:00 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed May 29 01:00:00 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src50 appears to have run properly
[Wed May 29 01:00:03 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed May 29 01:00:03 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed May 29 01:00:03 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Wed May 29 01:02:01 2013] Spatial fit model total counts = 9840.500000, observed total counts = 9835.000000
[Wed May 29 01:02:01 2013] Offset between fit and detection position for source 25 = 0.867741 pixels
[Wed May 29 01:02:01 2013] 9222.424000 total counts/ 8562.880000 bgd. counts: snr = 7.127445
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.867741 pixels
  Position = (368.3, 436.5) = 15 3 45.02 -41 43 51.2
  Extent = 20.5 (13.4-24.1)", rotation angle = 0
  Source counts = 659.5 +/- 96.0
  Background counts = 8562.9
  Rate = 0.01 +/- 0.002
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 36
[Wed May 29 01:03:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 20.54"
[Wed May 29 01:03:37 2013] source mask rpix=4.7, npix_max = 109, mask sum = 121, frac = 1.110
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 20.54"
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src46.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src46.csv
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src46.csv
[Wed May 29 01:03:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:45 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed May 29 01:03:45 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed May 29 01:03:45 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Wed May 29 01:05:44 2013] Warning, spatial fit 46 centroid is now closest to src. 31
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:22 2013] XMMSAS src. selection expression = ellipse(31996.371020, 37926.930000, 1232.322035, 1232.322035, 0.000000, X, Y)
[Wed May 29 03:28:22 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src25_src.reg
[Wed May 29 03:28:22 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (298, 366) - (439, 507)
[Wed May 29 03:28:22 2013] XMMSAS bgd. selection expression = annulus(31996.371020, 37926.930000, 2053.870059, 4107.740118, X, Y) && !ellipse(28430.283400, 33223.022000, 1524.704044, 589.262417, 114.421000, X, Y) && !ellipse(29117.046000, 32568.294000, 1761.920051, 1761.920051, 0.000000, X, Y) && !ellipse(28408.665400, 33044.814000, 1554.184045, 1554.184045, 0.000000, X, Y) && !ellipse(29718.922000, 33466.756000, 1559.528045, 548.290416, 312.085000, X, Y) && !ellipse(30332.028700, 34093.414000, 693.420020, 693.420020, 0.000000, X, Y) && !ellipse(33277.296000, 39526.550000, 2087.616060, 2087.616060, 0.000000, X, Y) && !ellipse(29326.714000, 33067.206000, 2107.816061, 806.928023, 131.820100, X, Y) && !ellipse(29282.381256, 34937.673309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29622.926000, 36043.506000, 2116.672061, 2116.672061, 0.000000, X, Y) && !ellipse(31733.666260, 37103.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.792000, 35095.570000, 1610.752046, 440.039213, 343.289000, X, Y) && !ellipse(29202.637451, 35617.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29881.164800, 35574.635600, 1251.400036, 1251.400036, 0.000000, X, Y) && !ellipse(32817.672000, 36398.755800, 1999.728058, 1999.728058, 0.000000, X, Y) && !ellipse(32749.321167, 39277.570923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31235.088000, 37768.686000, 3286.192095, 3286.192095, 0.000000, X, Y) && !ellipse(29966.340000, 37053.712000, 1863.512054, 1863.512054, 0.000000, X, Y) && !ellipse(30371.368000, 34929.020000, 1702.728049, 1702.728049, 0.000000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(31356.376000, 38499.902000, 1980.120057, 1980.120057, 0.000000, X, Y) && !ellipse(31234.663200, 37956.911400, 752.212822, 752.212822, 0.000000, X, Y) && !ellipse(30068.283203, 37530.707672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34916.278000, 39437.878000, 1433.856041, 1433.856041, 0.000000, X, Y) && !ellipse(32113.446000, 38812.716000, 2029.120058, 2029.120058, 0.000000, X, Y) && !ellipse(31036.344055, 35538.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.699646, 38324.293274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36655.602000, 40284.678400, 2189.888063, 2189.888063, 0.000000, X, Y) && !ellipse(31639.564056, 34296.438599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33180.804000, 36825.870000, 1939.384056, 1939.384056, 0.000000, X, Y) && !ellipse(33988.866730, 37884.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.634000, 38132.764400, 1608.464046, 1608.464046, 0.000000, X, Y) && !ellipse(35981.174000, 38184.265200, 3198.008092, 1782.752051, 325.283600, X, Y) && !ellipse(34419.594788, 38058.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35646.696228, 39111.371399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.127106, 37191.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.167725, 37455.642029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33859.996918, 33436.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36795.899109, 38063.112732, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:22 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src25.gif
[Wed May 29 05:42:31 2013] Mean detx,y = (-6095.22, 9720.13) 
[Wed May 29 05:42:32 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 05:42:57 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 05:42:58 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May 29 05:42:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src25_bgd.pi.gz