[Wed May 29 00:56:49 2013] Detection parameters:
  Position = (407.9, 460.9) = 15 3 29.64 -41 42 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1411.4 +/- 55.5
  Background counts = 195.7
  Rate = 0.02 +/- 0.001

[Wed May 29 00:57:19 2013] Off-axis axis estimate = 14.21'
[Wed May 29 00:59:57 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 00:59:57 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Wed May 29 00:59:57 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.227
[Wed May 29 00:59:57 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 13.53"
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src42.ximg exists
[Wed May 29 00:59:59 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed May 29 00:59:59 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_src42 appears to have run properly
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed May 29 01:00:02 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May 29 01:00:02 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed May 29 01:02:01 2013] Spatial fit model total counts = 7961.000000, observed total counts = 7961.000000
[Wed May 29 01:02:01 2013] Offset between fit and detection position for source 16 = 7.344576 pixels
[Wed May 29 01:02:01 2013] 7255.150000 total counts/ 2002.070000 bgd. counts: snr = 117.401700
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 7.344576 pixels
  Position = (400.9, 458.9) = 15 3 32.38 -41 42 13.6
  Extent = 27.1 (27.0-27.1)", rotation angle = 0
  Source counts = 5253.1 +/- 85.2
  Background counts = 2002.1
  Rate = 0.1 +/- 0.002
[Wed May 29 01:02:02 2013] Spatial fit model total counts = 7635.990000, observed total counts = 7636.000000
[Wed May 29 01:02:02 2013] Offset between fit and detection position for source 16 = 5.111522 pixels
[Wed May 29 01:02:02 2013] Warning, changing simple spatial fit ID from 42 to 91
[Wed May 29 01:02:02 2013] 6641.443000 total counts/ 6186.350000 bgd. counts: snr = 5.786060
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 5.111522 pixels
  Position = (401.9, 453.9) = 15 3 31.99 -41 42 35.4
  Extent = 17.9 (8.5-26.5)", rotation angle = 0
  Source counts = 455.1 +/- 81.5
  Background counts = 6186.4
  Rate = 0.008 +/- 0.002
[Wed May 29 01:02:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:02:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:02:02 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:02:02 2013] Source does appear to be extended
[Wed May 29 01:02:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:02:02 2013] Source is confused with source 18
[Wed May 29 01:03:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:37 2013] Initial guess for spatial extent in simple fitting = 17.92"
[Wed May 29 01:03:37 2013] source mask rpix=4.1, npix_max = 85, mask sum = 90, frac = 1.054
[Wed May 29 01:03:37 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 17.92"
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src38.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src38.csv
[Wed May 29 01:03:40 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed May 29 01:03:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src38.csv
[Wed May 29 01:03:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:44 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed May 29 01:03:44 2013] fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed May 29 01:03:44 2013] Fit fullrun_mos2_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Wed May 29 01:05:44 2013] Warning, spatial fit 38 centroid is now closest to src. 23
[Wed May 29 01:05:44 2013] Source 16 is offset by -0.048989 and 5.923425 pixels which is larger than
2 X fitted extent = 1.430372 x 1.430372, not incorporating fit results
[Wed May 29 01:05:44 2013] Source 16 is offset by 8.246345 and 4.145931 pixels which is larger than
2 X fitted extent = 1.448929 x 1.448929, not incorporating fit results
[Wed May 29 01:05:45 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:45 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:45 2013] Source does appear to be extended
[Wed May 29 01:05:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:28:20 2013] XMMSAS src. selection expression = ellipse(34916.278000, 39437.878000, 1075.392031, 1075.392031, 0.000000, X, Y)
[Wed May 29 03:28:20 2013] Writing source region out to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src16_src.reg
[Wed May 29 03:28:20 2013] Extracting stamp from image fullrun_mos2_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (340, 392) - (464, 516)
[Wed May 29 03:28:20 2013] XMMSAS bgd. selection expression = annulus(34916.278000, 39437.878000, 1792.320052, 3584.640103, X, Y) && !ellipse(33277.296000, 39526.550000, 2087.616060, 2087.616060, 0.000000, X, Y) && !ellipse(29622.926000, 36043.506000, 2116.672061, 2116.672061, 0.000000, X, Y) && !ellipse(31733.666260, 37103.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31234.792000, 35095.570000, 1610.752046, 440.039213, 343.289000, X, Y) && !ellipse(32817.672000, 36398.755800, 1999.728058, 1999.728058, 0.000000, X, Y) && !ellipse(32749.321167, 39277.570923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31235.088000, 37768.686000, 3286.192095, 3286.192095, 0.000000, X, Y) && !ellipse(29966.340000, 37053.712000, 1863.512054, 1863.512054, 0.000000, X, Y) && !ellipse(30371.368000, 34929.020000, 1702.728049, 1702.728049, 0.000000, X, Y) && !ellipse(32316.430000, 36120.108000, 11636.304335, 11636.304335, 0.000000, X, Y) && !ellipse(31356.376000, 38499.902000, 1980.120057, 1980.120057, 0.000000, X, Y) && !ellipse(31234.663200, 37956.911400, 752.212822, 752.212822, 0.000000, X, Y) && !ellipse(32113.446000, 38812.716000, 2029.120058, 2029.120058, 0.000000, X, Y) && !ellipse(31036.344055, 35538.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.699646, 38324.293274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31996.371020, 37926.930000, 1643.096047, 1643.096047, 0.000000, X, Y) && !ellipse(36655.602000, 40284.678400, 2189.888063, 2189.888063, 0.000000, X, Y) && !ellipse(33180.804000, 36825.870000, 1939.384056, 1939.384056, 0.000000, X, Y) && !ellipse(37900.696625, 40148.630280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33988.866730, 37884.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.634000, 38132.764400, 1608.464046, 1608.464046, 0.000000, X, Y) && !ellipse(38333.824829, 39447.450317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35981.174000, 38184.265200, 3198.008092, 1782.752051, 325.283600, X, Y) && !ellipse(34419.594788, 38058.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35646.696228, 39111.371399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.127106, 37191.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.167725, 37455.642029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36795.899109, 38063.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38513.434906, 38330.296295, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 03:28:20 2013] Writing fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src16.gif
[Wed May 29 05:29:33 2013] Mean detx,y = (-9078.21, 10954.07) 
[Wed May 29 05:29:34 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 05:29:49 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 05:29:50 2013] Setting source spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 29 05:29:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340201_pi300-10000_pass1_cl_src16_bgd.pi.gz