[Wed May 29 00:56:24 2013] Detection parameters:
  Position = (325.9, 202.7) = 15 4 1.45 -42 0 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 478.2 +/- 39.5
  Background counts = 353.6
  Rate = 0.01 +/- 0.001

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 7.22'
[Wed May 29 00:59:49 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Wed May 29 00:59:49 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 10.04"
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src59.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src59.csv
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src59.csv
[Wed May 29 00:59:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:56 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed May 29 00:59:56 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed May 29 00:59:56 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Wed May 29 01:01:24 2013] Warning, spatial fit 59 centroid is now closest to src. 114
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 114
[Wed May 29 01:03:24 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Wed May 29 01:03:24 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 10.04"
[Wed May 29 01:03:28 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src58.ximg exists
[Wed May 29 01:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src58.csv
[Wed May 29 01:03:28 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src58_1.ximg exists
[Wed May 29 01:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src58.csv
[Wed May 29 01:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:31 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Wed May 29 01:03:31 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Wed May 29 01:03:31 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Wed May 29 01:05:16 2013] Source 75 is offset by 9.428242 and -2.746487 pixels which is larger than
2 X fitted extent = 1.374460 x 1.374460, not incorporating fit results
[Wed May 29 01:05:16 2013] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 13.284781 pixels away
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:13 2013] XMMSAS src. selection expression = ellipse(28306.881012, 17590.679642, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 01:10:13 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_src.reg
[Wed May 29 01:10:13 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (288, 165) - (363, 240)
[Wed May 29 01:10:13 2013] XMMSAS bgd. selection expression = annulus(28306.881012, 17590.679642, 1087.500000, 2175.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(26418.442000, 19688.904000, 1431.608041, 1431.608041, 0.000000, X, Y) && !ellipse(25959.071200, 20024.349000, 1418.608041, 1418.608041, 0.000000, X, Y) && !ellipse(26182.932000, 18621.744000, 889.104026, 889.104026, 0.000000, X, Y) && !ellipse(27512.958400, 18565.381000, 2072.384060, 919.584026, 355.848000, X, Y) && !ellipse(26590.484600, 16818.110400, 956.624028, 956.624028, 0.000000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(26172.686000, 17992.762000, 1834.976053, 1834.976053, 0.000000, X, Y) && !ellipse(27000.670000, 20102.608000, 2823.072081, 2823.072081, 0.000000, X, Y) && !ellipse(26547.538800, 16967.240000, 1460.160042, 1460.160042, 0.000000, X, Y) && !ellipse(27979.828400, 18554.041600, 1540.128044, 1540.128044, 0.000000, X, Y) && !ellipse(31119.889862, 14818.094940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.464000, 19388.814000, 3080.256089, 3080.256089, 0.000000, X, Y) && !ellipse(30983.503662, 19983.827469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.726000, 17965.008000, 657.722419, 657.722419, 0.000000, X, Y) && !ellipse(28416.598000, 21135.224000, 2587.664074, 1863.088054, 45.303000, X, Y) && !ellipse(27961.403290, 15100.003296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28757.378418, 16335.900848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.519684, 16919.816132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.553864, 19250.476517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30420.940125, 19250.082245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.069183, 20628.392914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.393433, 17087.255554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28781.438293, 14756.056198, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:13 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75.gif
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_bgd.evt exist, delete to re-create
[Wed May 29 01:10:27 2013] Mean detx,y = (-9969.78, 138.04) 
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_bgd.img exist, delete to re-create
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_bgd.pi exist, delete to re-create
[Wed May 29 01:10:27 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_src.pi.gz
[Wed May 29 01:10:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src75_bgd.lc exist, delete to re-create
[Wed May 29 02:44:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 02:44:03 2013] rmf not generated due to insufficient counts