[Wed May 29 00:56:23 2013] Detection parameters:
  Position = (321.1, 249.6) = 15 4 3.35 -41 57 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 581.8 +/- 37.6
  Background counts = 348.1
  Rate = 0.01 +/- 0.0009

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 3.90'
[Wed May 29 00:59:49 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Wed May 29 00:59:49 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.892
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 8.38"
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src61.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src61.csv
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src61.csv
[Wed May 29 00:59:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:56 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed May 29 00:59:56 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed May 29 00:59:56 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Wed May 29 01:01:24 2013] Warning, spatial fit 61 centroid is now closest to src. 171
[Wed May 29 01:01:24 2013] Spatial fit model total counts = 6930.030000, observed total counts = 6938.000000
[Wed May 29 01:01:24 2013] Offset between fit and detection position for source 69 = 1.573294 pixels
[Wed May 29 01:01:24 2013] Warning, changing simple spatial fit ID from 61 to 70
[Wed May 29 01:01:24 2013] 6864.054000 total counts/ 6186.620000 bgd. counts: snr = 8.612719
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 1.573294 pixels
  Position = (322.5, 250.4) = 15 4 2.81 -41 57 21.0
  Extent = 16.2 (16.2-16.2)", rotation angle = 0
  Source counts = 677.4 +/- 82.8
  Background counts = 6186.6
  Rate = 0.01 +/- 0.002
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 98
[Wed May 29 01:01:25 2013] Source is confused with source 103
[Wed May 29 01:01:25 2013] Source is confused with source 171
[Wed May 29 01:01:25 2013] Source is confused with source 170
[Wed May 29 01:01:25 2013] Source is confused with source 166
[Wed May 29 01:03:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 16.17"
[Wed May 29 01:03:24 2013] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.012
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 16.17"
[Wed May 29 01:03:28 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src60.ximg exists
[Wed May 29 01:03:28 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src60_1.ximg exists
[Wed May 29 01:03:28 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src60 appears to have run properly
[Wed May 29 01:03:31 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Wed May 29 01:03:31 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Wed May 29 01:03:31 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Wed May 29 01:05:16 2013] Warning, spatial fit 60 centroid is now closest to src. 171
[Wed May 29 01:05:17 2013] Spatial fit model total counts = 6904.750000, observed total counts = 6938.000000
[Wed May 29 01:05:17 2013] Offset between fit and detection position for source 69 = 0.435995 pixels
[Wed May 29 01:05:17 2013] Warning, changing simple spatial fit ID from 60 to 68
[Wed May 29 01:05:17 2013] 6726.293000 total counts/ 6159.420000 bgd. counts: snr = 7.222971
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.435995 pixels
  Position = (322.3, 250.0) = 15 4 2.88 -41 57 22.7
  Extent = 16.2 (16.1-16.2)", rotation angle = 0
  Source counts = 566.9 +/- 82.0
  Background counts = 6159.4
  Rate = 0.01 +/- 0.002
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:13 2013] XMMSAS src. selection expression = ellipse(27990.862000, 21700.666000, 970.182028, 970.182028, 0.000000, X, Y)
[Wed May 29 01:10:13 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_src.reg
[Wed May 29 01:10:13 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (267, 194) - (378, 306)
[Wed May 29 01:10:13 2013] XMMSAS bgd. selection expression = annulus(27990.862000, 21700.666000, 1616.970047, 3233.940093, X, Y) && !ellipse(26500.749800, 26346.668000, 5838.504168, 5838.504168, 0.000000, X, Y) && !ellipse(26316.425740, 25190.352000, 1105.208032, 1105.208032, 0.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(26309.118220, 22233.684600, 1233.792036, 1233.792036, 0.000000, X, Y) && !ellipse(26455.058000, 23696.167400, 997.928029, 997.928029, 0.000000, X, Y) && !ellipse(26299.950400, 22625.034000, 1230.576035, 1230.576035, 0.000000, X, Y) && !ellipse(25690.715600, 23527.078600, 552.064816, 552.064816, 0.000000, X, Y) && !ellipse(26418.442000, 19688.904000, 1431.608041, 1431.608041, 0.000000, X, Y) && !ellipse(26220.831840, 21191.604000, 827.280024, 827.280024, 0.000000, X, Y) && !ellipse(25559.364200, 22827.949000, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(25959.071200, 20024.349000, 1418.608041, 1418.608041, 0.000000, X, Y) && !ellipse(26182.932000, 18621.744000, 889.104026, 889.104026, 0.000000, X, Y) && !ellipse(29090.798000, 25950.424000, 1091.008031, 1091.008031, 0.000000, X, Y) && !ellipse(27512.958400, 18565.381000, 2072.384060, 919.584026, 355.848000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(26172.686000, 17992.762000, 1834.976053, 1834.976053, 0.000000, X, Y) && !ellipse(27000.670000, 20102.608000, 2823.072081, 2823.072081, 0.000000, X, Y) && !ellipse(27422.158875, 22222.473831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.828400, 18554.041600, 1540.128044, 1540.128044, 0.000000, X, Y) && !ellipse(29779.392120, 20834.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.325867, 25264.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.464000, 19388.814000, 3080.256089, 3080.256089, 0.000000, X, Y) && !ellipse(30983.503662, 19983.827469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.726000, 17965.008000, 657.722419, 657.722419, 0.000000, X, Y) && !ellipse(28961.244843, 25190.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28416.598000, 21135.224000, 2587.664074, 1863.088054, 45.303000, X, Y) && !ellipse(28871.348206, 21715.344650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.230896, 22655.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.553864, 19250.476517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30420.940125, 19250.082245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.069183, 20628.392914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.295288, 24519.630402, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:13 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69.gif
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.evt exist, delete to re-create
[Wed May 29 01:10:27 2013] Mean detx,y = (-5763.40, 206.06) 
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.img exist, delete to re-create
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.pi exist, delete to re-create
[Wed May 29 01:10:27 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_src.pi.gz
[Wed May 29 01:10:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src69_bgd.lc exist, delete to re-create