[Wed May 29 00:56:23 2013] Detection parameters:
  Position = (333.2, 299.0) = 15 3 58.63 -41 53 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 839.8 +/- 49.4
  Background counts = 451.1
  Rate = 0.02 +/- 0.0009

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 2.52'
[Wed May 29 00:59:49 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Wed May 29 00:59:49 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 7.69"
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src56.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src56.csv
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src56_1.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src56.csv
[Wed May 29 00:59:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:56 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Wed May 29 00:59:56 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Wed May 29 00:59:56 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Wed May 29 01:01:24 2013] Spatial fit model total counts = 7703.310000, observed total counts = 7715.000000
[Wed May 29 01:01:24 2013] Offset between fit and detection position for source 68 = 1.283350 pixels
[Wed May 29 01:01:24 2013] 7754.967000 total counts/ 7204.530000 bgd. counts: snr = 6.484923
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 1.283350 pixels
  Position = (334.5, 299.1) = 15 3 58.13 -41 53 49.1
  Extent = 10.7 (7.3-14.8)", rotation angle = 0
  Source counts = 550.4 +/- 88.1
  Background counts = 7204.5
  Rate = 0.01 +/- 0.002
[Wed May 29 01:01:25 2013] Spatial fit model total counts = 7302.830000, observed total counts = 7295.000000
[Wed May 29 01:01:25 2013] Offset between fit and detection position for source 68 = 0.502742 pixels
[Wed May 29 01:01:25 2013] Warning, changing simple spatial fit ID from 56 to 86
[Wed May 29 01:01:25 2013] 7269.443000 total counts/ 7007.130000 bgd. counts: snr = 3.133645
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.502742 pixels
  Position = (334.9, 298.8) = 15 3 57.96 -41 53 50.2
  Extent = 13.6 (10.8-15.1)", rotation angle = 0
  Source counts = 262.3 +/- 85.3
  Background counts = 7007.1
  Rate = 0.005 +/- 0.002
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 92
[Wed May 29 01:01:25 2013] Source is confused with source 154
[Wed May 29 01:03:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 13.64"
[Wed May 29 01:03:24 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.059
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 13.64"
[Wed May 29 01:03:27 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src55.ximg exists
[Wed May 29 01:03:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src55.csv
[Wed May 29 01:03:27 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src55_1.ximg exists
[Wed May 29 01:03:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src55.csv
[Wed May 29 01:03:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:31 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Wed May 29 01:03:31 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Wed May 29 01:03:31 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Wed May 29 01:05:16 2013] Warning, spatial fit 55 centroid is now closest to src. 148
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:12 2013] XMMSAS src. selection expression = ellipse(29090.798000, 25950.424000, 818.256024, 818.256024, 0.000000, X, Y)
[Wed May 29 01:10:12 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_src.reg
[Wed May 29 01:10:12 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (288, 252) - (382, 346)
[Wed May 29 01:10:12 2013] XMMSAS bgd. selection expression = annulus(29090.798000, 25950.424000, 1363.760039, 2727.520078, X, Y) && !ellipse(27412.656000, 29268.864000, 1306.432038, 1306.432038, 0.000000, X, Y) && !ellipse(26573.083184, 26910.888620, 1103.360032, 1103.360032, 0.000000, X, Y) && !ellipse(27183.408400, 28655.190000, 1255.888036, 1255.888036, 0.000000, X, Y) && !ellipse(26500.749800, 26346.668000, 5838.504168, 5838.504168, 0.000000, X, Y) && !ellipse(26316.425740, 25190.352000, 1105.208032, 1105.208032, 0.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(26309.118220, 22233.684600, 1233.792036, 1233.792036, 0.000000, X, Y) && !ellipse(26455.058000, 23696.167400, 997.928029, 997.928029, 0.000000, X, Y) && !ellipse(30692.422000, 36829.006000, 11105.904320, 11105.904320, 0.000000, X, Y) && !ellipse(26299.950400, 22625.034000, 1230.576035, 1230.576035, 0.000000, X, Y) && !ellipse(25559.364200, 22827.949000, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(29563.512000, 28966.008000, 992.312029, 992.312029, 0.000000, X, Y) && !ellipse(30927.272000, 30454.198000, 2936.608084, 2936.608084, 0.000000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(29744.491760, 28320.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30496.040480, 27876.508000, 765.094422, 765.094422, 0.000000, X, Y) && !ellipse(29771.504028, 26062.704224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.325867, 25264.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.244843, 25190.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28416.598000, 21135.224000, 2587.664074, 1863.088054, 45.303000, X, Y) && !ellipse(30511.232361, 26703.163666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.230896, 22655.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29989.683716, 27457.149506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32651.047913, 24796.913696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.295288, 24519.630402, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:12 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68.gif
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create
[Wed May 29 01:10:27 2013] Mean detx,y = (-1695.39, 1791.97) 
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create
[Wed May 29 01:10:27 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_src.pi.gz
[Wed May 29 01:10:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Wed May 29 01:10:27 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create