[Wed May 29 00:56:22 2013] Detection parameters:
  Position = (430.4, 462.9) = 15 3 20.91 -41 41 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 456.6 +/- 38.0
  Background counts = 245.0
  Rate = 0.008 +/- 0.0007

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 15.29'
[Wed May 29 00:59:49 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Wed May 29 00:59:49 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 14.07"
[Wed May 29 00:59:53 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src93.ximg exists
[Wed May 29 00:59:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src93.csv
[Wed May 29 00:59:53 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src93_1.ximg exists
[Wed May 29 00:59:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src93.csv
[Wed May 29 00:59:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:57 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Wed May 29 00:59:57 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Wed May 29 00:59:57 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Wed May 29 01:01:25 2013] Warning, spatial fit 93 centroid is now closest to src. 81
[Wed May 29 01:01:25 2013] Source 59 is offset by 3.812760 and 6.302903 pixels which is larger than
2 X fitted extent = 1.515706 x 1.515706, not incorporating fit results
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 81
[Wed May 29 01:03:24 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Wed May 29 01:03:24 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 89 for pass 1, mean size = 14.07"
[Wed May 29 01:03:29 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src89.ximg exists
[Wed May 29 01:03:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src89.csv
[Wed May 29 01:03:29 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src89_1.ximg exists
[Wed May 29 01:03:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src89.csv
[Wed May 29 01:03:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:33 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Wed May 29 01:03:34 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Wed May 29 01:03:34 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly
[Wed May 29 01:05:17 2013] Warning, spatial fit 89 centroid is now closest to src. 83
[Wed May 29 01:05:17 2013] Source 59 is offset by 3.812760 and 6.302903 pixels which is larger than
2 X fitted extent = 1.515706 x 1.515706, not incorporating fit results
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:15 2013] XMMSAS src. selection expression = ellipse(37399.642151, 40226.284576, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 01:10:15 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src59_src.reg
[Wed May 29 01:10:15 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (393, 425) - (468, 500)
[Wed May 29 01:10:15 2013] XMMSAS bgd. selection expression = annulus(37399.642151, 40226.284576, 1087.500000, 2175.000000, X, Y) && !ellipse(33838.218000, 39382.256000, 1593.608046, 1593.608046, 0.000000, X, Y) && !ellipse(30692.422000, 36829.006000, 11105.904320, 11105.904320, 0.000000, X, Y) && !ellipse(33730.474800, 37444.566000, 1959.440056, 1959.440056, 0.000000, X, Y) && !ellipse(35049.046478, 38672.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36052.294434, 38577.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38446.751190, 39527.095886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37790.528000, 40075.722000, 2262.008065, 2262.008065, 0.000000, X, Y) && !ellipse(35665.071686, 39024.400604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36325.411987, 39003.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35892.849304, 40819.858856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37922.441315, 39458.967834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38827.493011, 38870.687683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36922.798889, 38830.416199, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:15 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src59.gif
[Wed May 29 01:16:29 2013] Mean detx,y = (11551.81, 11630.70) 
[Wed May 29 01:16:31 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 01:17:07 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 01:17:07 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed May 29 01:17:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Wed May 29 02:52:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 02:52:36 2013] rmf not generated due to insufficient counts