[Wed May 29 00:56:19 2013] Detection parameters:
  Position = (296.9, 272.0) = 15 4 12.79 -41 55 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1266.6 +/- 53.0
  Background counts = 227.6
  Rate = 0.03 +/- 0.001

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 1.92'
[Wed May 29 00:59:49 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Wed May 29 00:59:49 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 7.39"
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src42.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src42.csv
[Wed May 29 00:59:52 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed May 29 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src42.csv
[Wed May 29 00:59:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:55 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed May 29 00:59:55 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May 29 00:59:55 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed May 29 01:01:24 2013] Spatial fit model total counts = 7548.370000, observed total counts = 7520.000000
[Wed May 29 01:01:24 2013] Offset between fit and detection position for source 41 = 1.923905 pixels
[Wed May 29 01:01:24 2013] 7860.895000 total counts/ 7690.750000 bgd. counts: snr = 1.940148
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.923905 pixels
  Position = (295.5, 270.7) = 15 4 13.32 -41 55 52.8
  Extent = 5.2 (3.8-7.4)", rotation angle = 0
  Source counts = 170.1 +/- 88.7
  Background counts = 7690.8
  Rate = 0.003 +/- 0.002
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 55
[Wed May 29 01:03:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 5.17"
[Wed May 29 01:03:24 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.789
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 5.17"
[Wed May 29 01:03:27 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src41.ximg exists
[Wed May 29 01:03:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src41.csv
[Wed May 29 01:03:27 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed May 29 01:03:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src41.csv
[Wed May 29 01:03:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:30 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed May 29 01:03:30 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May 29 01:03:30 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed May 29 01:05:16 2013] Spatial fit model total counts = 6776.040000, observed total counts = 6754.000000
[Wed May 29 01:05:16 2013] Offset between fit and detection position for source 41 = 0.476636 pixels
[Wed May 29 01:05:16 2013] 6740.897000 total counts/ 6462.090000 bgd. counts: snr = 3.468304
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.476636 pixels
  Position = (295.9, 271.0) = 15 4 13.19 -41 55 51.4
  Extent = 6.9 (5.2-10.0)", rotation angle = 0
  Source counts = 278.8 +/- 82.1
  Background counts = 6462.1
  Rate = 0.005 +/- 0.002
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:11 2013] XMMSAS src. selection expression = ellipse(25690.715600, 23527.078600, 414.048612, 414.048612, 0.000000, X, Y)
[Wed May 29 01:10:11 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_src.reg
[Wed May 29 01:10:11 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (272, 247) - (320, 295)
[Wed May 29 01:10:11 2013] XMMSAS bgd. selection expression = annulus(25690.715600, 23527.078600, 690.081020, 1380.162040, X, Y) && !ellipse(26500.749800, 26346.668000, 5838.504168, 5838.504168, 0.000000, X, Y) && !ellipse(26316.425740, 25190.352000, 1105.208032, 1105.208032, 0.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(26309.118220, 22233.684600, 1233.792036, 1233.792036, 0.000000, X, Y) && !ellipse(26455.058000, 23696.167400, 997.928029, 997.928029, 0.000000, X, Y) && !ellipse(26299.950400, 22625.034000, 1230.576035, 1230.576035, 0.000000, X, Y) && !ellipse(25559.364200, 22827.949000, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(27990.862000, 21700.666000, 1293.576037, 1293.576037, 0.000000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(27000.670000, 20102.608000, 2823.072081, 2823.072081, 0.000000, X, Y) && !ellipse(27422.158875, 22222.473831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.464000, 19388.814000, 3080.256089, 3080.256089, 0.000000, X, Y) && !ellipse(28416.598000, 21135.224000, 2587.664074, 1863.088054, 45.303000, X, Y)
[Wed May 29 01:10:11 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41.gif
[Wed May 29 01:10:26 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Wed May 29 01:10:26 2013] Mean detx,y = (-3759.84, -1802.98) 
[Wed May 29 01:10:26 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Wed May 29 01:10:26 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Wed May 29 01:10:26 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_src.pi.gz
[Wed May 29 01:10:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed May 29 01:10:26 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create