[Wed May 29 00:56:18 2013] Detection parameters:
  Position = (315.2, 333.9) = 15 4 5.65 -41 51 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5309.2 +/- 93.4
  Background counts = 323.2
  Rate = 0.1 +/- 0.002

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 2.84'
[Wed May 29 00:59:49 2013] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 7.85"
[Wed May 29 00:59:49 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.85"
[Wed May 29 00:59:50 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 29 00:59:50 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 29 00:59:50 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed May 29 00:59:53 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 29 00:59:53 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 29 00:59:53 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 29 01:01:24 2013] Warning, spatial fit 1 centroid is now closest to src. 33
[Wed May 29 01:01:24 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 13.857441 pixels away
[Wed May 29 01:01:24 2013] Spatial fit model total counts = 18425.500000, observed total counts = 18329.000000
[Wed May 29 01:01:24 2013] Offset between fit and detection position for source 34 = 2.612718 pixels
[Wed May 29 01:01:24 2013] Warning, changing simple spatial fit ID from 1 to 5
[Wed May 29 01:01:24 2013] 19144.660000 total counts/ 15095.400000 bgd. counts: snr = 32.957431
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.612718 pixels
  Position = (315.7, 336.4) = 15 4 5.45 -41 51 6.8
  Extent = 16.3 (16.3-32.7)", rotation angle = 0
  Source counts = 4049.3 +/- 138.4
  Background counts = 15095.4
  Rate = 0.07 +/- 0.003
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 33
[Wed May 29 01:01:25 2013] Source is confused with source 32
[Wed May 29 01:03:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 16.33"
[Wed May 29 01:03:24 2013] source mask rpix=3.8, npix_max = 72, mask sum = 67, frac = 0.926
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 16.33"
[Wed May 29 01:03:26 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 29 01:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src1.csv
[Wed May 29 01:03:26 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 29 01:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src1.csv
[Wed May 29 01:03:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:29 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 29 01:03:29 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 29 01:03:29 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 29 01:05:16 2013] Warning, spatial fit 1 centroid is now closest to src. 32
[Wed May 29 01:05:16 2013] Spatial fit model total counts = 18441.300000, observed total counts = 18329.000000
[Wed May 29 01:05:16 2013] Offset between fit and detection position for source 34 = 0.563523 pixels
[Wed May 29 01:05:16 2013] Warning, changing simple spatial fit ID from 1 to 5
[Wed May 29 01:05:16 2013] 17463.630000 total counts/ 13609.200000 bgd. counts: snr = 33.040291
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.563523 pixels
  Position = (315.6, 337.0) = 15 4 5.48 -41 51 4.3
  Extent = 16.3 (16.1-32.7)", rotation angle = 0
  Source counts = 3854.4 +/- 132.2
  Background counts = 13609.2
  Rate = 0.07 +/- 0.002
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:03 2013] Counts = 3854.430000, rescaling region sizes by 2.000000
[Wed May 29 01:10:03 2013] XMMSAS src. selection expression = ellipse(27412.656000, 29268.864000, 1959.648056, 1959.648056, 0.000000, X, Y)
[Wed May 29 01:10:03 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_src.reg
[Wed May 29 01:10:03 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (203, 224) - (428, 450)
[Wed May 29 01:10:04 2013] XMMSAS bgd. selection expression = annulus(27412.656000, 29268.864000, 6532.160188, 13064.320376, X, Y) && !ellipse(26573.083184, 26910.888620, 1103.360032, 1103.360032, 0.000000, X, Y) && !ellipse(27183.408400, 28655.190000, 1255.888036, 1255.888036, 0.000000, X, Y) && !ellipse(26500.749800, 26346.668000, 5838.504168, 5838.504168, 0.000000, X, Y) && !ellipse(28562.615200, 33548.594000, 1259.296036, 1259.296036, 0.000000, X, Y) && !ellipse(26316.425740, 25190.352000, 1105.208032, 1105.208032, 0.000000, X, Y) && !ellipse(28882.400600, 32342.720000, 765.052822, 765.052822, 0.000000, X, Y) && !ellipse(28378.131378, 31413.007751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.826000, 31496.402000, 547.705616, 547.705616, 0.000000, X, Y) && !ellipse(29525.958954, 33277.494110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.446000, 33714.956000, 1575.216045, 1575.216045, 0.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(34413.172092, 27651.184081, 507.652203, 424.424224, 90.000000, X, Y) && !ellipse(31660.367860, 37631.266000, 1850.984053, 1850.984053, 0.000000, X, Y) && !ellipse(33838.218000, 39382.256000, 1593.608046, 1593.608046, 0.000000, X, Y) && !ellipse(35765.577820, 28362.413605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.580383, 34715.821716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29147.060000, 35719.605800, 882.728025, 882.728025, 0.000000, X, Y) && !ellipse(31340.266000, 35042.796000, 1755.336051, 1755.336051, 0.000000, X, Y) && !ellipse(30139.055664, 35706.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.421021, 36402.288361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29859.757202, 34784.313507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.342000, 32395.928000, 948.512027, 948.512027, 0.000000, X, Y) && !ellipse(31705.119385, 37111.430756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29946.656000, 36859.920000, 1863.328054, 1863.328054, 0.000000, X, Y) && !ellipse(26309.118220, 22233.684600, 1233.792036, 1233.792036, 0.000000, X, Y) && !ellipse(30785.191559, 37451.155029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29629.166000, 35647.394000, 2606.096075, 2606.096075, 0.000000, X, Y) && !ellipse(33056.416000, 39478.759600, 2037.576059, 975.184028, 332.721000, X, Y) && !ellipse(26455.058000, 23696.167400, 997.928029, 997.928029, 0.000000, X, Y) && !ellipse(30692.422000, 36829.006000, 11105.904320, 11105.904320, 0.000000, X, Y) && !ellipse(32204.592000, 35738.844000, 1853.312053, 1853.312053, 0.000000, X, Y) && !ellipse(30558.263400, 38331.224780, 1079.584031, 1079.584031, 0.000000, X, Y) && !ellipse(26299.950400, 22625.034000, 1230.576035, 1230.576035, 0.000000, X, Y) && !ellipse(33002.427765, 38238.270325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30940.805481, 38659.368591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31465.367584, 38904.072021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.230286, 31265.125275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25690.715600, 23527.078600, 552.064816, 552.064816, 0.000000, X, Y) && !ellipse(29995.250800, 31273.473658, 1468.304042, 1468.304042, 0.000000, X, Y) && !ellipse(26418.442000, 19688.904000, 1431.608041, 1431.608041, 0.000000, X, Y) && !ellipse(32945.952637, 37627.956085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.831840, 21191.604000, 827.280024, 827.280024, 0.000000, X, Y) && !ellipse(25559.364200, 22827.949000, 914.048026, 914.048026, 0.000000, X, Y) && !ellipse(33730.474800, 37444.566000, 1959.440056, 1959.440056, 0.000000, X, Y) && !ellipse(28519.956000, 30045.312000, 1127.208032, 1127.208032, 0.000000, X, Y) && !ellipse(25959.071200, 20024.349000, 1418.608041, 1418.608041, 0.000000, X, Y) && !ellipse(29563.512000, 28966.008000, 992.312029, 992.312029, 0.000000, X, Y) && !ellipse(40644.252563, 19080.283829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26182.932000, 18621.744000, 889.104026, 889.104026, 0.000000, X, Y) && !ellipse(30927.272000, 30454.198000, 2936.608084, 2936.608084, 0.000000, X, Y) && !ellipse(29090.798000, 25950.424000, 1091.008031, 1091.008031, 0.000000, X, Y) && !ellipse(27512.958400, 18565.381000, 2072.384060, 919.584026, 355.848000, X, Y) && !ellipse(26590.484600, 16818.110400, 956.624028, 956.624028, 0.000000, X, Y) && !ellipse(28306.881012, 17590.679642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.862000, 21700.666000, 1293.576037, 1293.576037, 0.000000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(26172.686000, 17992.762000, 1834.976053, 1834.976053, 0.000000, X, Y) && !ellipse(37464.231049, 22313.768341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.670000, 20102.608000, 2823.072081, 2823.072081, 0.000000, X, Y) && !ellipse(26547.538800, 16967.240000, 1460.160042, 1460.160042, 0.000000, X, Y) && !ellipse(34854.005371, 20136.032333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.158875, 22222.473831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.491760, 28320.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32283.528137, 16810.809921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34526.326965, 21089.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.427124, 17161.727798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30496.040480, 27876.508000, 765.094422, 765.094422, 0.000000, X, Y) && !ellipse(27979.828400, 18554.041600, 1540.128044, 1540.128044, 0.000000, X, Y) && !ellipse(32354.947200, 16325.282800, 1188.576034, 1188.576034, 0.000000, X, Y) && !ellipse(35612.430420, 23103.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35158.452271, 19177.574722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29779.392120, 20834.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29771.504028, 26062.704224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.559448, 38318.646027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.325867, 25264.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36960.616400, 20303.537140, 1855.392053, 625.525618, 125.679000, X, Y) && !ellipse(35564.268000, 23978.267000, 1102.368032, 1102.368032, 0.000000, X, Y) && !ellipse(31051.198944, 29577.174469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35595.116974, 23621.367615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34808.707916, 19533.041992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37399.642151, 40226.284576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.464000, 19388.814000, 3080.256089, 3080.256089, 0.000000, X, Y) && !ellipse(35941.951416, 20842.351105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.046478, 38672.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36052.294434, 38577.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32321.996857, 29698.859772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35572.939514, 25176.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38446.751190, 39527.095886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.894104, 27408.642120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.680359, 19859.651749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39386.812103, 26817.202484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.355225, 23008.127533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30983.503662, 19983.827469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.726000, 17965.008000, 657.722419, 657.722419, 0.000000, X, Y) && !ellipse(31373.992096, 16582.614136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.244843, 25190.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28416.598000, 21135.224000, 2587.664074, 1863.088054, 45.303000, X, Y) && !ellipse(37790.528000, 40075.722000, 2262.008065, 2262.008065, 0.000000, X, Y) && !ellipse(30511.232361, 26703.163666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31434.375427, 30697.777374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28871.348206, 21715.344650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.230896, 22655.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29989.683716, 27457.149506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.071686, 39024.400604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35893.120117, 18923.055649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28757.378418, 16335.900848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.519684, 16919.816132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36794.876923, 23703.038971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37208.668549, 23353.586670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.000000, 35288.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.553864, 19250.476517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19076.862823, 16027.665222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.513550, 21589.265274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32426.188171, 30507.117065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32908.946838, 21204.494446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36325.411987, 39003.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30420.940125, 19250.082245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.069183, 20628.392914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35892.849304, 40819.858856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35305.745331, 21854.239853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37922.441315, 39458.967834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34370.203278, 21776.500595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33777.534363, 33458.660034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.983795, 30231.779907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35295.982788, 27544.656616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32890.242157, 34922.892761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38827.493011, 38870.687683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32651.047913, 24796.913696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13939.365204, 33437.350769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36922.798889, 38830.416199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37861.927887, 22401.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.295288, 24519.630402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.393433, 17087.255554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36306.962189, 19000.996689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33798.225006, 15442.490128, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:04 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34.gif
[Wed May 29 01:10:22 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create
[Wed May 29 01:10:22 2013] Mean detx,y = (1579.85, 793.12) 
[Wed May 29 01:10:22 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create
[Wed May 29 01:10:22 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create
[Wed May 29 01:10:22 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_src.pi.gz
[Wed May 29 01:10:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed May 29 01:10:22 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create