[Wed May 29 00:56:17 2013] Detection parameters:
  Position = (317.9, 360.6) = 15 4 4.60 -41 49 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2261.3 +/- 64.1
  Background counts = 216.7
  Rate = 0.06 +/- 0.002

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 4.73'
[Wed May 29 00:59:49 2013] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 8.79"
[Wed May 29 00:59:49 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.708
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.79"
[Wed May 29 00:59:51 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 29 00:59:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src10.csv
[Wed May 29 00:59:51 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 29 00:59:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src10.csv
[Wed May 29 00:59:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:54 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 29 00:59:54 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 29 00:59:54 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May 29 01:01:24 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.632495 pixels away
[Wed May 29 01:01:24 2013] Spatial fit model total counts = 10480.500000, observed total counts = 9685.000000
[Wed May 29 01:01:24 2013] Offset between fit and detection position for source 29 = 1.946904 pixels
[Wed May 29 01:01:24 2013] Warning, changing simple spatial fit ID from 10 to 25
[Wed May 29 01:01:24 2013] 10814.623000 total counts/ 10292.800000 bgd. counts: snr = 5.143473
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.946904 pixels
  Position = (318.0, 362.6) = 15 4 4.56 -41 49 12.9
  Extent = 6.8 (5.7-7.8)", rotation angle = 0
  Source counts = 521.8 +/- 104.0
  Background counts = 10292.8
  Rate = 0.01 +/- 0.002
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:03:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 6.85"
[Wed May 29 01:03:24 2013] source mask rpix=1.6, npix_max = 17, mask sum = 10, frac = 0.581
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 6.85"
[Wed May 29 01:03:26 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src10.ximg exists
[Wed May 29 01:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src10.csv
[Wed May 29 01:03:26 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May 29 01:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src10.csv
[Wed May 29 01:03:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:29 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May 29 01:03:29 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May 29 01:03:29 2013] Fit fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May 29 01:05:16 2013] Warning, spatial fit 10 centroid is now closest to src. 28
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major axis lower bound
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:05 2013] XMMSAS src. selection expression = ellipse(27618.826000, 31496.402000, 410.779212, 410.779212, 0.000000, X, Y)
[Wed May 29 01:10:05 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_src.reg
[Wed May 29 01:10:05 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (294, 339) - (342, 386)
[Wed May 29 01:10:05 2013] XMMSAS bgd. selection expression = annulus(27618.826000, 31496.402000, 684.632020, 1369.264039, X, Y) && !ellipse(27412.656000, 29268.864000, 1306.432038, 1306.432038, 0.000000, X, Y) && !ellipse(26500.749800, 26346.668000, 5838.504168, 5838.504168, 0.000000, X, Y) && !ellipse(28562.615200, 33548.594000, 1259.296036, 1259.296036, 0.000000, X, Y) && !ellipse(28882.400600, 32342.720000, 765.052822, 765.052822, 0.000000, X, Y) && !ellipse(28378.131378, 31413.007751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29525.958954, 33277.494110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.446000, 33714.956000, 1575.216045, 1575.216045, 0.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(28003.342000, 32395.928000, 948.512027, 948.512027, 0.000000, X, Y) && !ellipse(30692.422000, 36829.006000, 11105.904320, 11105.904320, 0.000000, X, Y) && !ellipse(29201.230286, 31265.125275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29995.250800, 31273.473658, 1468.304042, 1468.304042, 0.000000, X, Y) && !ellipse(28519.956000, 30045.312000, 1127.208032, 1127.208032, 0.000000, X, Y) && !ellipse(30927.272000, 30454.198000, 2936.608084, 2936.608084, 0.000000, X, Y)
[Wed May 29 01:10:05 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29.gif
[Wed May 29 01:10:23 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Wed May 29 01:10:23 2013] Mean detx,y = (3904.24, 980.67) 
[Wed May 29 01:10:23 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Wed May 29 01:10:23 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Wed May 29 01:10:23 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_src.pi.gz
[Wed May 29 01:10:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 29 01:10:23 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create