[Wed May 29 00:56:17 2013] Detection parameters:
  Position = (335.1, 399.6) = 15 3 57.91 -41 46 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1954.3 +/- 58.1
  Background counts = 194.7
  Rate = 0.05 +/- 0.001

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 7.80'
[Wed May 29 00:59:49 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Wed May 29 00:59:49 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.817
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.33"
[Wed May 29 00:59:51 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src19.ximg exists
[Wed May 29 00:59:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src19.csv
[Wed May 29 00:59:51 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May 29 00:59:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src19.csv
[Wed May 29 00:59:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:54 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May 29 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 29 00:59:54 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May 29 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 29 00:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:01:24 2013] Source 22 is offset by -1.729260 and 7.721790 pixels which is larger than
2 X fitted extent = 1.108515 x 1.108515, not incorporating fit results
[Wed May 29 01:01:24 2013] Spatial fit model total counts = 10354.600000, observed total counts = 9302.000000
[Wed May 29 01:01:24 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:03:24 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Wed May 29 01:03:24 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.817
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 10.33"
[Wed May 29 01:03:26 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 29 01:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src18.csv
[Wed May 29 01:03:26 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 29 01:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src18.csv
[Wed May 29 01:03:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:30 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 29 01:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed May 29 01:03:30 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 29 01:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed May 29 01:03:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:05:16 2013] Source 22 is offset by 6.450303 and -1.721543 pixels which is larger than
2 X fitted extent = 1.851430 x 1.851430, not incorporating fit results
[Wed May 29 01:05:16 2013] Spatial fit model total counts = 10249.600000, observed total counts = 9302.000000
[Wed May 29 01:05:16 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 01:05:16 2013] Source 22 is offset by -3.059145 and -1.566256 pixels which is larger than
2 X fitted extent = 1.914009 x 4.359674, not incorporating fit results
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:05:17 2013] Source is confused with source 18
[Wed May 29 01:05:17 2013] Source is confused with source 13
[Wed May 29 01:10:07 2013] Counts = 1954.279907, rescaling region sizes by 2.000000
[Wed May 29 01:10:07 2013] XMMSAS src. selection expression = ellipse(29108.580383, 34715.821716, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 29 01:10:07 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_src.reg
[Wed May 29 01:10:07 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (260, 325) - (410, 475)
[Wed May 29 01:10:07 2013] XMMSAS bgd. selection expression = annulus(29108.580383, 34715.821716, 4350.000000, 8700.000000, X, Y) && !ellipse(27412.656000, 29268.864000, 1306.432038, 1306.432038, 0.000000, X, Y) && !ellipse(26573.083184, 26910.888620, 1103.360032, 1103.360032, 0.000000, X, Y) && !ellipse(27183.408400, 28655.190000, 1255.888036, 1255.888036, 0.000000, X, Y) && !ellipse(26500.749800, 26346.668000, 5838.504168, 5838.504168, 0.000000, X, Y) && !ellipse(28562.615200, 33548.594000, 1259.296036, 1259.296036, 0.000000, X, Y) && !ellipse(26316.425740, 25190.352000, 1105.208032, 1105.208032, 0.000000, X, Y) && !ellipse(28882.400600, 32342.720000, 765.052822, 765.052822, 0.000000, X, Y) && !ellipse(28378.131378, 31413.007751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.826000, 31496.402000, 547.705616, 547.705616, 0.000000, X, Y) && !ellipse(29525.958954, 33277.494110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.446000, 33714.956000, 1575.216045, 1575.216045, 0.000000, X, Y) && !ellipse(26107.371600, 24679.422000, 6495.624187, 6495.624187, 0.000000, X, Y) && !ellipse(34413.172092, 27651.184081, 507.652203, 424.424224, 90.000000, X, Y) && !ellipse(31660.367860, 37631.266000, 1850.984053, 1850.984053, 0.000000, X, Y) && !ellipse(33838.218000, 39382.256000, 1593.608046, 1593.608046, 0.000000, X, Y) && !ellipse(35765.577820, 28362.413605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29147.060000, 35719.605800, 882.728025, 882.728025, 0.000000, X, Y) && !ellipse(31340.266000, 35042.796000, 1755.336051, 1755.336051, 0.000000, X, Y) && !ellipse(30139.055664, 35706.115784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29658.421021, 36402.288361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29859.757202, 34784.313507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.342000, 32395.928000, 948.512027, 948.512027, 0.000000, X, Y) && !ellipse(31705.119385, 37111.430756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29946.656000, 36859.920000, 1863.328054, 1863.328054, 0.000000, X, Y) && !ellipse(30785.191559, 37451.155029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29629.166000, 35647.394000, 2606.096075, 2606.096075, 0.000000, X, Y) && !ellipse(33056.416000, 39478.759600, 2037.576059, 975.184028, 332.721000, X, Y) && !ellipse(30692.422000, 36829.006000, 11105.904320, 11105.904320, 0.000000, X, Y) && !ellipse(32204.592000, 35738.844000, 1853.312053, 1853.312053, 0.000000, X, Y) && !ellipse(30558.263400, 38331.224780, 1079.584031, 1079.584031, 0.000000, X, Y) && !ellipse(33002.427765, 38238.270325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30940.805481, 38659.368591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31465.367584, 38904.072021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.230286, 31265.125275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29995.250800, 31273.473658, 1468.304042, 1468.304042, 0.000000, X, Y) && !ellipse(32945.952637, 37627.956085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33730.474800, 37444.566000, 1959.440056, 1959.440056, 0.000000, X, Y) && !ellipse(28519.956000, 30045.312000, 1127.208032, 1127.208032, 0.000000, X, Y) && !ellipse(29563.512000, 28966.008000, 992.312029, 992.312029, 0.000000, X, Y) && !ellipse(30927.272000, 30454.198000, 2936.608084, 2936.608084, 0.000000, X, Y) && !ellipse(29090.798000, 25950.424000, 1091.008031, 1091.008031, 0.000000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(29744.491760, 28320.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30496.040480, 27876.508000, 765.094422, 765.094422, 0.000000, X, Y) && !ellipse(29771.504028, 26062.704224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.559448, 38318.646027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.325867, 25264.528076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31051.198944, 29577.174469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37399.642151, 40226.284576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35049.046478, 38672.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36052.294434, 38577.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32321.996857, 29698.859772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35572.939514, 25176.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38446.751190, 39527.095886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.894104, 27408.642120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.244843, 25190.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37790.528000, 40075.722000, 2262.008065, 2262.008065, 0.000000, X, Y) && !ellipse(30511.232361, 26703.163666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31434.375427, 30697.777374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29989.683716, 27457.149506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.071686, 39024.400604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.000000, 35288.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32426.188171, 30507.117065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36325.411987, 39003.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35892.849304, 40819.858856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37922.441315, 39458.967834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33777.534363, 33458.660034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.983795, 30231.779907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35295.982788, 27544.656616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32890.242157, 34922.892761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36922.798889, 38830.416199, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:07 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22.gif
[Wed May 29 01:10:24 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed May 29 01:10:24 2013] Mean detx,y = (6851.34, 2955.18) 
[Wed May 29 01:10:24 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed May 29 01:10:24 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed May 29 01:10:24 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_src.pi.gz
[Wed May 29 01:10:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May 29 01:10:24 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed May 29 02:43:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 02:43:51 2013] rmf not generated due to insufficient counts