[Wed May 29 00:56:30 2013] Detection parameters:
  Position = (404.7, 221.0) = 15 3 30.73 -41 59 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.2 +/- 31.4
  Background counts = 272.1
  Rate = 0.009 +/- 0.001

[Wed May 29 00:56:46 2013] Off-axis axis estimate = 9.53'
[Wed May 29 00:59:49 2013] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Wed May 29 00:59:49 2013] Initial guess for spatial extent in simple fitting = 11.19"
[Wed May 29 00:59:49 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Wed May 29 00:59:49 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 11.19"
[Wed May 29 00:59:53 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src82.ximg exists
[Wed May 29 00:59:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src82.csv
[Wed May 29 00:59:53 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src82_1.ximg exists
[Wed May 29 00:59:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src82.csv
[Wed May 29 00:59:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:59:57 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Wed May 29 00:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src82.csv
[Wed May 29 00:59:57 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Wed May 29 00:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src82.csv
[Wed May 29 00:59:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:01:25 2013] Warning, spatial fit 82 centroid is now closest to src. 182
[Wed May 29 01:01:25 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:01:25 2013] Assessing source extent using major
[Wed May 29 01:01:25 2013] Source does appear to be extended
[Wed May 29 01:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:01:25 2013] Source is confused with source 111
[Wed May 29 01:03:24 2013] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Wed May 29 01:03:24 2013] Initial guess for spatial extent in simple fitting = 11.19"
[Wed May 29 01:03:24 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Wed May 29 01:03:24 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 11.19"
[Wed May 29 01:03:28 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src78.ximg exists
[Wed May 29 01:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src78.csv
[Wed May 29 01:03:28 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src78_1.ximg exists
[Wed May 29 01:03:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src78.csv
[Wed May 29 01:03:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:03:33 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Wed May 29 01:03:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.csv
[Wed May 29 01:03:33 2013] fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Wed May 29 01:03:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.csv
[Wed May 29 01:03:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340201_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 01:05:17 2013] Spatial fit model total counts = 3553.330000, observed total counts = 3100.000000
[Wed May 29 01:05:17 2013] Poor agreement between spatial fit and data for source 113
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 01:05:17 2013] Vigneting correction estimate = 1.000000
[Wed May 29 01:05:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 01:05:17 2013] Assessing source extent using major
[Wed May 29 01:05:17 2013] Source does appear to be extended
[Wed May 29 01:05:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 01:10:15 2013] XMMSAS src. selection expression = ellipse(35158.452271, 19177.574722, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 01:10:15 2013] Not overwriting source region fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_src.reg
[Wed May 29 01:10:15 2013] Extracting stamp from image fullrun_mos1_xmm0077340201_pi300-10000_cl_sm2.00.img.gz, (367, 183) - (442, 258)
[Wed May 29 01:10:15 2013] XMMSAS bgd. selection expression = annulus(35158.452271, 19177.574722, 1087.500000, 2175.000000, X, Y) && !ellipse(26123.604000, 20276.878000, 8589.648247, 8589.648247, 0.000000, X, Y) && !ellipse(34854.005371, 20136.032333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32283.528137, 16810.809921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34526.326965, 21089.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.947200, 16325.282800, 1188.576034, 1188.576034, 0.000000, X, Y) && !ellipse(36960.616400, 20303.537140, 1855.392053, 625.525618, 125.679000, X, Y) && !ellipse(34808.707916, 19533.041992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35941.951416, 20842.351105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.680359, 19859.651749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35893.120117, 18923.055649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32908.946838, 21204.494446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35305.745331, 21854.239853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34370.203278, 21776.500595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36306.962189, 19000.996689, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 01:10:15 2013] Writing fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113.gif
[Wed May 29 01:10:29 2013] ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_src.evt and ../../xmm0077340201/products/events/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_bgd.evt exist, delete to re-create
[Wed May 29 01:10:29 2013] Mean detx,y = (-9079.49, 7116.76) 
[Wed May 29 01:10:29 2013] ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_src.img and ../../xmm0077340201/products/images/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_bgd.img exist, delete to re-create
[Wed May 29 01:10:29 2013] ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_src.pi and ../../xmm0077340201/products/spectra/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_bgd.pi exist, delete to re-create
[Wed May 29 01:10:29 2013] Setting source spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_src.pi.gz
[Wed May 29 01:10:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_bgd.pi.gz
[Wed May 29 01:10:29 2013] ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_src.lc and ../../xmm0077340201/products/lightcurves/fullrun_mos1_xmm0077340201_pi300-10000_pass1_cl_src113_bgd.lc exist, delete to re-create
[Wed May 29 02:44:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 02:44:09 2013] rmf not generated due to insufficient counts