[Mon May 27 04:06:30 2013] Detection parameters:
  Position = (242.3, 344.1) = 15 2 15.05 -41 47 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 551.9 +/- 49.6
  Background counts = 837.5
  Rate = 0.01 +/- 0.001

[Mon May 27 04:06:59 2013] Off-axis axis estimate = 5.25'
[Mon May 27 04:11:13 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:13 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Mon May 27 04:11:13 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.938
[Mon May 27 04:11:13 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 9.05"
[Mon May 27 04:11:17 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src81.ximg exists
[Mon May 27 04:11:17 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src81_1.ximg exists
[Mon May 27 04:11:17 2013] Fit fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src81 appears to have run properly
[Mon May 27 04:11:19 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Mon May 27 04:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Mon May 27 04:11:19 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Mon May 27 04:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Mon May 27 04:11:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:12:25 2013] Warning, spatial fit 81 centroid is now closest to src. 93
[Mon May 27 04:12:26 2013] Spatial fit model total counts = 7416.660000, observed total counts = 7420.000000
[Mon May 27 04:12:26 2013] Offset between fit and detection position for source 85 = 4.210312 pixels
[Mon May 27 04:12:26 2013] Warning, changing simple spatial fit ID from 81 to 89
[Mon May 27 04:12:26 2013] 7474.679000 total counts/ 6804.240000 bgd. counts: snr = 8.127734
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 4.210312 pixels
  Position = (245.1, 341.0) = 15 2 13.96 -41 47 28.0
  Extent = 17.9 (17.8-35.7)", rotation angle = 0
  Source counts = 670.4 +/- 86.5
  Background counts = 6804.2
  Rate = 0.02 +/- 0.002
[Mon May 27 04:12:26 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:26 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:26 2013] Source does appear to be extended
[Mon May 27 04:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:26 2013] Source is confused with source 92
[Mon May 27 04:12:26 2013] Source is confused with source 93
[Mon May 27 04:15:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:24 2013] Initial guess for spatial extent in simple fitting = 17.85"
[Mon May 27 04:15:24 2013] source mask rpix=4.1, npix_max = 84, mask sum = 96, frac = 1.132
[Mon May 27 04:15:24 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 17.85"
[Mon May 27 04:15:28 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src74.ximg exists
[Mon May 27 04:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src74.csv
[Mon May 27 04:15:28 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src74_1.ximg exists
[Mon May 27 04:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src74.csv
[Mon May 27 04:15:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:31 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Mon May 27 04:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src74.csv
[Mon May 27 04:15:31 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Mon May 27 04:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src74.csv
[Mon May 27 04:15:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:16:45 2013] Warning, spatial fit 74 centroid is now closest to src. 93
[Mon May 27 04:16:45 2013] Source 85 is offset by 4.137908 and -3.900483 pixels which is larger than
2 X fitted extent = 2.808018 x 2.808018, not incorporating fit results
[Mon May 27 04:16:45 2013] Spatial fit model total counts = 7422.330000, observed total counts = 7420.000000
[Mon May 27 04:16:45 2013] Offset between fit and detection position for source 85 = 0.252351 pixels
[Mon May 27 04:16:45 2013] Warning, changing simple spatial fit ID from 74 to 82
[Mon May 27 04:16:45 2013] 7478.504000 total counts/ 6796.250000 bgd. counts: snr = 8.275827
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.252351 pixels
  Position = (245.1, 340.7) = 15 2 13.96 -41 47 29.1
  Extent = 17.9 (17.9-35.7)", rotation angle = 0
  Source counts = 682.3 +/- 86.5
  Background counts = 6796.2
  Rate = 0.02 +/- 0.002
[Mon May 27 04:16:45 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:16:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:16:45 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:16:45 2013] Source does appear to be extended
[Mon May 27 04:16:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:20:04 2013] XMMSAS src. selection expression = ellipse(21272.852000, 29593.804000, 1071.216031, 1071.216031, 0.000000, X, Y)
[Mon May 27 04:20:04 2013] Not overwriting source region fullrun_pn_xmm0077340101_pi300-10000_pass1_cl_src85_src.reg
[Mon May 27 04:20:04 2013] Extracting stamp from image fullrun_pn_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (184, 279) - (307, 402)
[Mon May 27 04:20:04 2013] XMMSAS bgd. selection expression = annulus(21272.852000, 29593.804000, 1785.360051, 3570.720103, X, Y) && !ellipse(16796.404000, 34707.710000, 2726.640078, 2726.640078, 0.000000, X, Y) && !ellipse(17749.307600, 33959.192400, 1654.872048, 1166.856034, 33.476000, X, Y) && !ellipse(21629.557400, 33861.376000, 716.265621, 716.265621, 0.000000, X, Y) && !ellipse(21301.782000, 33347.346000, 2592.640075, 2592.640075, 0.000000, X, Y) && !ellipse(17981.524000, 33921.140000, 1738.456050, 1738.456050, 0.000000, X, Y) && !ellipse(19341.902000, 33030.034000, 8167.800235, 8167.800235, 0.000000, X, Y) && !ellipse(18673.334000, 33371.440000, 1620.840047, 1620.840047, 0.000000, X, Y) && !ellipse(23707.739160, 32850.039400, 481.692014, 481.692014, 0.000000, X, Y) && !ellipse(23026.152527, 32466.634888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21663.725571, 32325.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25578.633972, 32016.121552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22398.702728, 31964.483887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19834.390000, 32744.812000, 1677.088048, 1677.088048, 0.000000, X, Y) && !ellipse(17954.567337, 32836.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.814850, 31519.567352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20654.194489, 31777.429108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.294000, 31177.740000, 771.630422, 771.630422, 0.000000, X, Y) && !ellipse(25016.723572, 31011.264648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20177.201218, 30838.385071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21049.730133, 30993.956512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.635620, 30662.773468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24770.780243, 29707.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18324.809845, 29578.334717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24210.134000, 29177.164000, 948.088027, 948.088027, 0.000000, X, Y) && !ellipse(16023.026400, 29401.572400, 1727.616050, 1727.616050, 0.000000, X, Y) && !ellipse(21657.994690, 29668.236664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20783.266083, 29015.441956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25333.404846, 28860.706848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23261.042969, 30131.090576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24650.228000, 28866.704000, 1844.936053, 1844.936053, 0.000000, X, Y) && !ellipse(22155.483459, 27765.632050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20179.000000, 26542.040558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23624.187256, 26130.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17319.737885, 26261.000397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.168610, 26211.115051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25567.793488, 25966.241699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19344.858826, 25974.697968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21759.824356, 26007.256592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18222.714676, 25609.997833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17249.442001, 25185.846283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.744659, 25346.026855, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:20:04 2013] Writing fullrun_pn_xmm0077340101_pi300-10000_pass1_cl_src85.gif