[Mon May 27 04:06:28 2013] Detection parameters:
  Position = (164.0, 367.0) = 15 2 45.48 -41 45 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 301.7 +/- 37.9
  Background counts = 443.3
  Rate = 0.005 +/- 0.0006

[Mon May 27 04:06:59 2013] Off-axis axis estimate = 10.94'
[Mon May 27 04:11:13 2013] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:13 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Mon May 27 04:11:13 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Mon May 27 04:11:13 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 11.90"
[Mon May 27 04:11:16 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src69.ximg exists
[Mon May 27 04:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src69.csv
[Mon May 27 04:11:16 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src69_1.ximg exists
[Mon May 27 04:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src69.csv
[Mon May 27 04:11:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:19 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Mon May 27 04:11:19 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Mon May 27 04:11:19 2013] Fit fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Mon May 27 04:12:25 2013] Spatial fit model total counts = 4856.600000, observed total counts = 3596.000000
[Mon May 27 04:12:25 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:12:25 2013] Warning, spatial fit 69 centroid is now closest to src. 64
[Mon May 27 04:12:26 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:26 2013] Assessing source extent using major
[Mon May 27 04:12:26 2013] Source does appear to be extended
[Mon May 27 04:12:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:26 2013] Source is confused with source 64
[Mon May 27 04:15:24 2013] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:24 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Mon May 27 04:15:24 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Mon May 27 04:15:24 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 11.90"
[Mon May 27 04:15:28 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src63.ximg exists
[Mon May 27 04:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src63.csv
[Mon May 27 04:15:28 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src63_1.ximg exists
[Mon May 27 04:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src63.csv
[Mon May 27 04:15:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:31 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Mon May 27 04:15:31 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Mon May 27 04:15:31 2013] Fit fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Mon May 27 04:16:45 2013] Spatial fit model total counts = 17453.200000, observed total counts = 14141.000000
[Mon May 27 04:16:45 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:16:45 2013] Warning, spatial fit 63 centroid is now closest to src. 64
[Mon May 27 04:16:45 2013] Warning: source 80 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 12.961310 pixels away
[Mon May 27 04:16:45 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:16:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:16:45 2013] Assessing source extent using major
[Mon May 27 04:16:45 2013] Source does appear to be extended
[Mon May 27 04:16:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:20:02 2013] XMMSAS src. selection expression = ellipse(14216.686996, 31881.899200, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 04:20:02 2013] Not overwriting source region fullrun_pn_xmm0077340101_pi300-10000_pass1_cl_src73_src.reg
[Mon May 27 04:20:02 2013] Extracting stamp from image fullrun_pn_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (126, 330) - (201, 405)
[Mon May 27 04:20:02 2013] XMMSAS bgd. selection expression = annulus(14216.686996, 31881.899200, 1087.500000, 2175.000000, X, Y) && !ellipse(11744.192000, 34011.496000, 2086.216060, 2086.216060, 0.000000, X, Y) && !ellipse(14105.930000, 36068.458000, 2032.208058, 2032.208058, 0.000000, X, Y) && !ellipse(15060.207062, 34848.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13482.260000, 35219.592000, 2920.112084, 2920.112084, 0.000000, X, Y) && !ellipse(15498.431595, 34819.705048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12690.936000, 35397.978000, 2133.696061, 1061.696031, 120.311000, X, Y) && !ellipse(16796.404000, 34707.710000, 2726.640078, 2726.640078, 0.000000, X, Y) && !ellipse(13024.185898, 34667.882507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17749.307600, 33959.192400, 1654.872048, 1166.856034, 33.476000, X, Y) && !ellipse(15518.174393, 33882.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13756.060654, 34395.665009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.524000, 33921.140000, 1738.456050, 1738.456050, 0.000000, X, Y) && !ellipse(19341.902000, 33030.034000, 8167.800235, 8167.800235, 0.000000, X, Y) && !ellipse(14542.710000, 32257.952000, 1904.064055, 1904.064055, 0.000000, X, Y) && !ellipse(15998.916565, 33538.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16023.026400, 29401.572400, 1727.616050, 1727.616050, 0.000000, X, Y)
[Mon May 27 04:20:02 2013] Writing fullrun_pn_xmm0077340101_pi300-10000_pass1_cl_src73.gif