[Mon May 27 04:06:24 2013] Detection parameters:
  Position = (150.9, 410.9) = 15 2 50.51 -41 42 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 650.0 +/- 41.7
  Background counts = 344.8
  Rate = 0.01 +/- 0.0007

[Mon May 27 04:06:59 2013] Off-axis axis estimate = 13.45'
[Mon May 27 04:11:13 2013] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:13 2013] Initial guess for spatial extent in simple fitting = 13.15"
[Mon May 27 04:11:13 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.987
[Mon May 27 04:11:13 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 13.15"
[Mon May 27 04:11:16 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src40.ximg exists
[Mon May 27 04:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src40.csv
[Mon May 27 04:11:16 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon May 27 04:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src40.csv
[Mon May 27 04:11:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:18 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon May 27 04:11:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Mon May 27 04:11:18 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon May 27 04:11:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Mon May 27 04:11:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:12:24 2013] Spatial fit model total counts = 4949.730000, observed total counts = 4951.000000
[Mon May 27 04:12:24 2013] Offset between fit and detection position for source 43 = 5.658959 pixels
[Mon May 27 04:12:24 2013] Warning, changing simple spatial fit ID from 40 to 36
[Mon May 27 04:12:24 2013] 4808.299000 total counts/ 4352.870000 bgd. counts: snr = 6.902920
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 5.658959 pixels
  Position = (146.4, 407.4) = 15 2 52.25 -41 42 38.0
  Extent = 26.7 (26.6-53.3)" x 13.3 (8.4-21.5)", rotation angle = 120 (90-152) degrees
  Source counts = 455.4 +/- 69.3
  Background counts = 4352.9
  Rate = 0.01 +/- 0.002
[Mon May 27 04:12:26 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:26 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:26 2013] Source does appear to be extended
[Mon May 27 04:12:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Mon May 27 04:12:26 2013] Source is confused with source 33
[Mon May 27 04:15:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:24 2013] Initial guess for spatial extent in simple fitting = 19.97"
[Mon May 27 04:15:24 2013] source mask rpix=4.6, npix_max = 103, mask sum = 121, frac = 1.167
[Mon May 27 04:15:24 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 19.97"
[Mon May 27 04:15:27 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src36.ximg exists
[Mon May 27 04:15:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src36.csv
[Mon May 27 04:15:27 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon May 27 04:15:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src36.csv
[Mon May 27 04:15:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:29 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon May 27 04:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Mon May 27 04:15:29 2013] fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon May 27 04:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Mon May 27 04:15:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:16:44 2013] Source 43 is offset by -4.707954 and -3.677264 pixels which is larger than
2 X fitted extent = 4.580561 x 7.109425, not incorporating fit results
[Mon May 27 04:16:45 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:16:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:16:45 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:16:45 2013] Source does appear to be extended
[Mon May 27 04:16:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Mon May 27 04:19:53 2013] XMMSAS src. selection expression = ellipse(12690.936000, 35397.978000, 1600.272046, 796.272023, 120.311000, X, Y)
[Mon May 27 04:19:53 2013] Not overwriting source region fullrun_pn_xmm0077340101_pi300-10000_pass1_cl_src43_src.reg
[Mon May 27 04:19:53 2013] Extracting stamp from image fullrun_pn_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (54, 315) - (238, 499)
[Mon May 27 04:19:53 2013] XMMSAS bgd. selection expression = annulus(12690.936000, 35397.978000, 2667.120077, 5334.240153, X, Y) && !ellipse(11744.192000, 34011.496000, 2086.216060, 2086.216060, 0.000000, X, Y) && !ellipse(17836.564000, 40798.500000, 2096.768060, 2096.768060, 0.000000, X, Y) && !ellipse(11428.600000, 37117.422000, 2199.296063, 2199.296063, 0.000000, X, Y) && !ellipse(9817.365845, 37292.578094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9162.210152, 37158.355743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12165.868027, 36839.399109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12580.533157, 36326.874908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10841.983467, 37097.221039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14105.930000, 36068.458000, 2032.208058, 2032.208058, 0.000000, X, Y) && !ellipse(14560.158844, 35799.864868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8150.582924, 35633.394531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15174.253845, 35515.017395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15992.853806, 35208.568604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12101.330902, 35078.554474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15060.207062, 34848.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13482.260000, 35219.592000, 2920.112084, 2920.112084, 0.000000, X, Y) && !ellipse(15498.431595, 34819.705048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10805.866440, 34397.287231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16796.404000, 34707.710000, 2726.640078, 2726.640078, 0.000000, X, Y) && !ellipse(13024.185898, 34667.882507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17749.307600, 33959.192400, 1654.872048, 1166.856034, 33.476000, X, Y) && !ellipse(7536.114891, 33974.213623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15518.174393, 33882.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7683.163689, 35072.062927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13756.060654, 34395.665009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7166.537468, 33631.178528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10774.081757, 33704.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.524000, 33921.140000, 1738.456050, 1738.456050, 0.000000, X, Y) && !ellipse(19341.902000, 33030.034000, 8167.800235, 8167.800235, 0.000000, X, Y) && !ellipse(18673.334000, 33371.440000, 1620.840047, 1620.840047, 0.000000, X, Y) && !ellipse(14542.710000, 32257.952000, 1904.064055, 1904.064055, 0.000000, X, Y) && !ellipse(15998.916565, 33538.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.567337, 32836.740662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14216.686996, 31881.899200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9651.996017, 31343.007904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18324.809845, 29578.334717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16023.026400, 29401.572400, 1727.616050, 1727.616050, 0.000000, X, Y) && !ellipse(7740.374000, 28105.944000, 2189.016063, 2189.016063, 0.000000, X, Y)
[Mon May 27 04:19:53 2013] Writing fullrun_pn_xmm0077340101_pi300-10000_pass1_cl_src43.gif