[Mon May 27 04:07:30 2013] Detection parameters:
  Position = (333.0, 125.1) = 15 1 39.72 -42 3 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450.2 +/- 34.9
  Background counts = 172.1
  Rate = 0.007 +/- 0.0005

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 12.82'
[Mon May 27 04:11:26 2013] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 12.84"
[Mon May 27 04:11:26 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.029
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 12.84"
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src43.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src43.csv
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src43.csv
[Mon May 27 04:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon May 27 04:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon May 27 04:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Mon May 27 04:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:13:34 2013] Warning, spatial fit 43 centroid is now closest to src. 20
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:13:35 2013] Source is confused with source 16
[Mon May 27 04:15:43 2013] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 12.84"
[Mon May 27 04:15:43 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.029
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 12.84"
[Mon May 27 04:15:47 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src43.ximg exists
[Mon May 27 04:15:47 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon May 27 04:15:47 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src43 appears to have run properly
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon May 27 04:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon May 27 04:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon May 27 04:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:58 2013] Warning, spatial fit 43 centroid is now closest to src. 20
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:22:47 2013] XMMSAS src. selection expression = ellipse(28918.228058, 10831.900993, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 04:22:47 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_src.reg
[Mon May 27 04:22:47 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (295, 88) - (370, 163)
[Mon May 27 04:22:47 2013] XMMSAS bgd. selection expression = annulus(28918.228058, 10831.900993, 1087.500000, 2175.000000, X, Y) && !ellipse(29366.898000, 13417.524000, 830.360024, 830.360024, 0.000000, X, Y) && !ellipse(27546.604000, 10879.295000, 2031.360058, 2031.360058, 0.000000, X, Y) && !ellipse(28917.779358, 11604.894852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30735.450730, 12659.354035, 1310.072038, 853.592227, 90.000000, X, Y) && !ellipse(27866.730255, 11000.825241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28714.020000, 12758.726000, 1660.720048, 1660.720048, 0.000000, X, Y) && !ellipse(30392.188812, 12829.135498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.860748, 12051.895584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.643951, 11351.878525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.054535, 12905.468918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30854.285000, 13266.574000, 2159.904062, 2159.904062, 0.000000, X, Y) && !ellipse(25966.955902, 12644.686630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.607544, 11891.519867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30018.400513, 11972.584549, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:47 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7.gif
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Mon May 27 04:23:14 2013] Mean detx,y = (5025.06, -16457.62) 
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Mon May 27 04:23:14 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 27 04:23:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 04:24:25 2013] rmf not generated due to insufficient counts
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create