[Mon May 27 04:07:37 2013] Detection parameters:
  Position = (273.2, 364.5) = 15 2 3.02 -41 45 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.1 +/- 23.4
  Background counts = 172.1
  Rate = 0.004 +/- 0.0005

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 5.13'
[Mon May 27 04:11:26 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Mon May 27 04:11:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.683
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 8.99"
[Mon May 27 04:11:30 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src85.ximg exists
[Mon May 27 04:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src85.csv
[Mon May 27 04:11:30 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src85_1.ximg exists
[Mon May 27 04:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src85.csv
[Mon May 27 04:11:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:33 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Mon May 27 04:11:33 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Mon May 27 04:11:33 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Mon May 27 04:13:35 2013] Source 67 is offset by -5.087144 and -6.712845 pixels which is larger than
2 X fitted extent = 1.032143 x 1.032143, not incorporating fit results
[Mon May 27 04:13:35 2013] Source 67 is offset by 3.576167 and 1.526373 pixels which is larger than
2 X fitted extent = 1.955853 x 1.955853, not incorporating fit results
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:13:35 2013] Source is confused with source 74
[Mon May 27 04:15:44 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:44 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Mon May 27 04:15:44 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.683
[Mon May 27 04:15:44 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 8.99"
[Mon May 27 04:15:49 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src80.ximg exists
[Mon May 27 04:15:49 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src80_1.ximg exists
[Mon May 27 04:15:49 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src80 appears to have run properly
[Mon May 27 04:15:53 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Mon May 27 04:15:53 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Mon May 27 04:15:53 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Mon May 27 04:17:59 2013] Source 67 is offset by 3.578810 and 1.497497 pixels which is larger than
2 X fitted extent = 1.992681 x 1.992681, not incorporating fit results
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:22:52 2013] XMMSAS src. selection expression = ellipse(23717.288513, 31666.852448, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 04:22:52 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_src.reg
[Mon May 27 04:22:52 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (236, 327) - (311, 402)
[Mon May 27 04:22:52 2013] XMMSAS bgd. selection expression = annulus(23717.288513, 31666.852448, 1087.500000, 2175.000000, X, Y) && !ellipse(26298.178000, 28015.000400, 2029.320058, 2029.320058, 0.000000, X, Y) && !ellipse(21017.286000, 32020.876000, 1506.976043, 1506.976043, 0.000000, X, Y) && !ellipse(19732.998695, 32750.148172, 2249.040065, 1476.524607, 42.866910, X, Y) && !ellipse(18281.920000, 33378.994000, 3395.728098, 3395.728098, 0.000000, X, Y) && !ellipse(22225.650000, 30861.904000, 1396.520040, 1396.520040, 0.000000, X, Y) && !ellipse(21551.496155, 31612.150879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21986.502000, 31048.670000, 1179.096034, 1179.096034, 0.000000, X, Y) && !ellipse(23770.426000, 29624.620000, 1273.736037, 566.630416, 42.211000, X, Y) && !ellipse(22923.276000, 30299.446000, 1840.368053, 1840.368053, 0.000000, X, Y) && !ellipse(23553.906000, 29613.910000, 1348.288039, 1348.288039, 0.000000, X, Y) && !ellipse(22723.272000, 30463.206000, 2452.416071, 2452.416071, 0.000000, X, Y) && !ellipse(25051.280000, 28554.424000, 1245.024036, 1245.024036, 0.000000, X, Y) && !ellipse(22615.000000, 31557.239563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.171000, 29570.726400, 738.910421, 738.910421, 0.000000, X, Y) && !ellipse(23065.788000, 32096.628000, 1464.320042, 1464.320042, 0.000000, X, Y) && !ellipse(20964.674942, 32860.155365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25589.527557, 32020.571381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20995.976410, 30143.149719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.177673, 29717.726410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.303162, 31174.575500, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:52 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67.gif
[Mon May 27 04:23:15 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_bgd.evt exist, delete to re-create
[Mon May 27 04:23:15 2013] Mean detx,y = (754.79, 4444.62) 
[Mon May 27 04:23:15 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_bgd.img exist, delete to re-create
[Mon May 27 04:23:15 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_bgd.pi exist, delete to re-create
[Mon May 27 04:23:15 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon May 27 04:23:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon May 27 04:23:15 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 04:24:25 2013] rmf not generated due to insufficient counts
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src67.arf exists, delete to re-create