[Mon May 27 04:07:52 2013] Detection parameters:
  Position = (304.9, 206.9) = 15 1 50.66 -41 57 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 496.5 +/- 37.2
  Background counts = 265.0
  Rate = 0.01 +/- 0.0009

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 6.65'
[Mon May 27 04:11:26 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Mon May 27 04:11:26 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.197
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.75"
[Mon May 27 04:11:28 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src16.ximg exists
[Mon May 27 04:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src16.csv
[Mon May 27 04:11:28 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon May 27 04:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src16.csv
[Mon May 27 04:11:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:31 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon May 27 04:11:31 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon May 27 04:11:31 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon May 27 04:13:34 2013] Warning, spatial fit 16 centroid is now closest to src. 188
[Mon May 27 04:13:35 2013] Spatial fit model total counts = 2672.370000, observed total counts = 2655.000000
[Mon May 27 04:13:35 2013] Offset between fit and detection position for source 201 = 6.172904 pixels
[Mon May 27 04:13:35 2013] Warning, changing simple spatial fit ID from 16 to 83
[Mon May 27 04:13:35 2013] 2704.274000 total counts/ 2344.410000 bgd. counts: snr = 7.432272
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 6.172904 pixels
  Position = (298.8, 207.2) = 15 1 53.07 -41 57 10.0
  Extent = 14.5 (9.4-19.1)", rotation angle = 0
  Source counts = 359.9 +/- 52.0
  Background counts = 2344.4
  Rate = 0.006 +/- 0.0009
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:13:35 2013] Source is confused with source 202
[Mon May 27 04:13:35 2013] Source is confused with source 193
[Mon May 27 04:13:35 2013] Source is confused with source 194
[Mon May 27 04:15:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 14.49"
[Mon May 27 04:15:43 2013] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 14.49"
[Mon May 27 04:15:46 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src16.ximg exists
[Mon May 27 04:15:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src16.csv
[Mon May 27 04:15:46 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon May 27 04:15:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src16.csv
[Mon May 27 04:15:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:50 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon May 27 04:15:50 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon May 27 04:15:50 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon May 27 04:17:57 2013] Warning, spatial fit 16 centroid is now closest to src. 194
[Mon May 27 04:17:58 2013] Spatial fit model total counts = 9845.720000, observed total counts = 9844.000000
[Mon May 27 04:17:58 2013] Offset between fit and detection position for source 201 = 3.243984 pixels
[Mon May 27 04:17:58 2013] Warning, changing simple spatial fit ID from 16 to 35
[Mon May 27 04:17:58 2013] 9580.790000 total counts/ 5666.900000 bgd. counts: snr = 51.991918
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 3.243984 pixels
  Position = (301.9, 206.5) = 15 1 51.84 -41 57 13.2
  Extent = 40.1 (40.1-40.2)", rotation angle = 0
  Source counts = 3913.9 +/- 97.9
  Background counts = 5666.9
  Rate = 0.06 +/- 0.002
[Mon May 27 04:17:59 2013] Spatial fit model total counts = 2673.570000, observed total counts = 2655.000000
[Mon May 27 04:17:59 2013] Offset between fit and detection position for source 201 = 3.214119 pixels
[Mon May 27 04:17:59 2013] Warning, changing simple spatial fit ID from 35 to 79
[Mon May 27 04:17:59 2013] 2705.310000 total counts/ 2330.820000 bgd. counts: snr = 7.756858
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 3.214119 pixels
  Position = (298.8, 207.2) = 15 1 53.06 -41 57 10.1
  Extent = 14.7 (9.8-19.1)", rotation angle = 0
  Source counts = 374.5 +/- 52.0
  Background counts = 2330.8
  Rate = 0.006 +/- 0.0009
[Mon May 27 04:17:59 2013] Spatial fit model total counts = 6282.930000, observed total counts = 6262.000000
[Mon May 27 04:17:59 2013] Offset between fit and detection position for source 201 = 1.638866 pixels
[Mon May 27 04:17:59 2013] Warning, changing simple spatial fit ID from 79 to 86
[Mon May 27 04:17:59 2013] 6171.862000 total counts/ 5376.760000 bgd. counts: snr = 10.843326
Spatial fit parameters:
  Offset between fit and detection position for source 201 = 1.638866 pixels
  Position = (297.3, 206.6) = 15 1 53.65 -41 57 12.8
  Extent = 39.6 (39.4-79.2)" x 13.6 (11.4-16.3)", rotation angle = 128 (122-136) degrees
  Source counts = 795.1 +/- 78.6
  Background counts = 5376.8
  Rate = 0.01 +/- 0.001
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.42
[Mon May 27 04:17:59 2013] Source is asymmetric
[Mon May 27 04:22:41 2013] XMMSAS src. selection expression = ellipse(25814.800000, 17921.354000, 2375.388068, 818.784024, 128.393000, X, Y)
[Mon May 27 04:22:41 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_src.reg
[Mon May 27 04:22:41 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (161, 70) - (434, 343)
[Mon May 27 04:22:41 2013] XMMSAS bgd. selection expression = annulus(25814.800000, 17921.354000, 3958.980114, 7917.960228, X, Y) && !ellipse(30649.880000, 16331.944000, 1676.144048, 1676.144048, 0.000000, X, Y) && !ellipse(31008.880000, 17204.380000, 3438.320099, 3438.320099, 0.000000, X, Y) && !ellipse(30940.338196, 16658.550629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30553.136688, 18129.647934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30619.172400, 15664.226000, 1773.920051, 806.912023, 104.017000, X, Y) && !ellipse(30576.203200, 15776.686000, 1719.160049, 1719.160049, 0.000000, X, Y) && !ellipse(30484.028931, 20994.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30807.063690, 19198.329086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31508.740143, 17199.624359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29366.898000, 13417.524000, 830.360024, 830.360024, 0.000000, X, Y) && !ellipse(30176.600000, 16779.769600, 1693.648049, 1693.648049, 0.000000, X, Y) && !ellipse(29701.405945, 22847.346924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24084.878800, 25315.970160, 1288.160037, 1288.160037, 0.000000, X, Y) && !ellipse(29232.867000, 24679.152200, 579.966417, 579.966417, 0.000000, X, Y) && !ellipse(29042.992000, 22639.844000, 1030.688030, 1030.688030, 0.000000, X, Y) && !ellipse(26553.382843, 17273.265579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.604000, 10879.295000, 2031.360058, 2031.360058, 0.000000, X, Y) && !ellipse(26725.480000, 16775.958000, 1606.288046, 1606.288046, 0.000000, X, Y) && !ellipse(30289.882568, 21620.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.535553, 23019.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.897000, 19067.312400, 581.135217, 581.135217, 0.000000, X, Y) && !ellipse(30123.242000, 20322.246400, 949.976027, 949.976027, 0.000000, X, Y) && !ellipse(28918.228058, 10831.900993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19084.167900, 20677.929000, 618.739218, 618.739218, 0.000000, X, Y) && !ellipse(28598.671320, 20446.064000, 1375.136040, 1375.136040, 0.000000, X, Y) && !ellipse(21000.579000, 21482.284400, 640.164818, 640.164818, 0.000000, X, Y) && !ellipse(29630.917572, 17618.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28669.645630, 20653.617020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25363.603149, 11357.756760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28489.432861, 22048.572067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31143.819641, 18329.201263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19266.267303, 25955.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.309906, 20434.040787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.020000, 16158.122800, 949.976027, 949.976027, 0.000000, X, Y) && !ellipse(28917.779358, 11604.894852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25894.182560, 18034.935400, 640.871218, 640.871218, 0.000000, X, Y) && !ellipse(26540.590912, 18461.148254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23572.397400, 11762.137200, 409.779212, 409.779212, 0.000000, X, Y) && !ellipse(25552.191200, 24428.663200, 1034.016030, 1034.016030, 0.000000, X, Y) && !ellipse(28039.588593, 24471.215942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31952.748657, 17700.020386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24979.924866, 11019.250481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.413422, 10905.246178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17704.784000, 20969.844000, 1636.592047, 1636.592047, 0.000000, X, Y) && !ellipse(28303.968445, 24051.769104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30735.450730, 12659.354035, 1310.072038, 853.592227, 90.000000, X, Y) && !ellipse(26662.066300, 21777.112439, 1371.056039, 891.387855, -0.000000, X, Y) && !ellipse(19947.716000, 19635.878000, 1598.840046, 1598.840046, 0.000000, X, Y) && !ellipse(25772.762800, 24710.286000, 1097.304032, 1097.304032, 0.000000, X, Y) && !ellipse(27866.730255, 11000.825241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25275.714000, 18552.600000, 578.222417, 578.222417, 0.000000, X, Y) && !ellipse(28714.020000, 12758.726000, 1660.720048, 1660.720048, 0.000000, X, Y) && !ellipse(26512.305600, 26814.464000, 1084.408031, 1084.408031, 0.000000, X, Y) && !ellipse(29846.033356, 21604.921982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.204000, 17205.962000, 1583.592046, 1583.592046, 0.000000, X, Y) && !ellipse(25811.381805, 11620.827682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.943695, 20811.093445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18299.673320, 17668.112200, 558.495216, 558.495216, 0.000000, X, Y) && !ellipse(19539.728683, 20212.717545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.186600, 18105.568600, 714.917621, 714.917621, 0.000000, X, Y) && !ellipse(30392.188812, 12829.135498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18305.487869, 22999.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22943.875600, 24874.723600, 856.216025, 856.216025, 0.000000, X, Y) && !ellipse(27875.892000, 23803.716000, 2550.048073, 2550.048073, 0.000000, X, Y) && !ellipse(27903.851800, 24898.648000, 1199.360035, 1199.360035, 0.000000, X, Y) && !ellipse(21316.622971, 11807.315613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26727.860748, 12051.895584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18662.788437, 21345.517654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29550.401154, 23963.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.201935, 12385.547806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22969.549957, 20673.608063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.643951, 11351.878525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17277.744614, 20990.882736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.896332, 23804.041595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.005310, 11338.002014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27133.161591, 22484.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.054535, 12905.468918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23378.458984, 24918.668030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.083832, 23199.486115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17772.146912, 22748.481598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19871.736115, 26523.612000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30854.285000, 13266.574000, 2159.904062, 2159.904062, 0.000000, X, Y) && !ellipse(17812.520615, 18462.793045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26195.506134, 21283.387314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27310.591888, 25385.339874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19137.292000, 20702.142000, 1429.960041, 644.238419, 358.961000, X, Y) && !ellipse(25966.955902, 12644.686630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19254.889175, 22668.891785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18317.961197, 25782.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28190.078308, 18584.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24005.409637, 11106.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17185.530136, 25831.297180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.596863, 19349.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18918.964249, 21786.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17782.979431, 25706.683380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.607544, 11891.519867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.842896, 23617.438171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22430.637421, 11867.671066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17912.676285, 23523.431549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18164.212433, 19975.469437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25544.846069, 12818.214035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.802612, 23350.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25458.090332, 12192.678513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20266.195145, 21314.698074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19272.335373, 22162.077225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.343109, 21963.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23209.065460, 12642.394012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.268280, 14221.508530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19752.283691, 21601.133255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30018.400513, 11972.584549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.128693, 23872.610382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19728.227798, 22990.676025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.525574, 19002.095871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21197.584732, 12337.858170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33976.865997, 24990.085663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18463.482025, 18217.490906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23339.185791, 12213.284195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18342.344986, 18700.654465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28866.054077, 15639.665878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19015.493149, 20057.872253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19755.194931, 12706.524918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22235.583038, 12381.936966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.732605, 11476.838806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17098.615097, 19574.529480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23692.878174, 13313.481873, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:41 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201.gif
[Mon May 27 04:23:12 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_bgd.evt exist, delete to re-create
[Mon May 27 04:23:12 2013] Mean detx,y = (4679.45, -9004.32) 
[Mon May 27 04:23:12 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_bgd.img exist, delete to re-create
[Mon May 27 04:23:12 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_bgd.pi exist, delete to re-create
[Mon May 27 04:23:12 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_src_b10.pi.gz
[Mon May 27 04:23:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_bgd.pi.gz
[Mon May 27 04:23:12 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201.rmf exists, delete to re-create
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src201.arf exists, delete to re-create