[Mon May 27 04:07:50 2013] Detection parameters:
  Position = (343.5, 229.7) = 15 1 35.64 -41 55 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.8 +/- 26.4
  Background counts = 184.0
  Rate = 0.007 +/- 0.0006

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 5.96'
[Mon May 27 04:11:26 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Mon May 27 04:11:26 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.846
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 9.41"
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src42.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src42.csv
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src42.csv
[Mon May 27 04:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon May 27 04:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon May 27 04:11:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon May 27 04:11:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:13:34 2013] Warning, spatial fit 42 centroid is now closest to src. 176
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:13:35 2013] Source is confused with source 185
[Mon May 27 04:15:43 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Mon May 27 04:15:43 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.846
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 9.41"
[Mon May 27 04:15:47 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src42.ximg exists
[Mon May 27 04:15:47 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon May 27 04:15:47 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src42 appears to have run properly
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon May 27 04:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon May 27 04:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon May 27 04:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:58 2013] Warning, spatial fit 42 centroid is now closest to src. 11
[Mon May 27 04:17:58 2013] Spatial fit model total counts = 3175.780000, observed total counts = 3063.000000
[Mon May 27 04:17:58 2013] Offset between fit and detection position for source 183 = 5.562988 pixels
[Mon May 27 04:17:58 2013] Warning, changing simple spatial fit ID from 42 to 53
[Mon May 27 04:17:58 2013] 3169.344000 total counts/ 3064.520000 bgd. counts: snr = 1.893562
Spatial fit parameters:
  Offset between fit and detection position for source 183 = 5.562988 pixels
  Position = (346.8, 234.1) = 15 1 34.35 -41 55 12.7
  Extent = 11.9" x 11.9", rotation angle = 0
  Source counts = 104.8 +/- 56.3
  Background counts = 3064.5
  Rate = 0.002 +/- 0.0009
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:22:47 2013] XMMSAS src. selection expression = ellipse(30123.242000, 20322.246400, 712.482021, 712.482021, 0.000000, X, Y)
[Mon May 27 04:22:47 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_src.reg
[Mon May 27 04:22:47 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (306, 193) - (388, 275)
[Mon May 27 04:22:47 2013] XMMSAS bgd. selection expression = annulus(30123.242000, 20322.246400, 1187.470034, 2374.940068, X, Y) && !ellipse(30649.880000, 16331.944000, 1676.144048, 1676.144048, 0.000000, X, Y) && !ellipse(31008.880000, 17204.380000, 3438.320099, 3438.320099, 0.000000, X, Y) && !ellipse(30553.136688, 18129.647934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.028931, 20994.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30807.063690, 19198.329086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31508.740143, 17199.624359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25814.800000, 17921.354000, 3167.184091, 1091.712031, 128.393000, X, Y) && !ellipse(30176.600000, 16779.769600, 1693.648049, 1693.648049, 0.000000, X, Y) && !ellipse(29701.405945, 22847.346924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.992000, 22639.844000, 1030.688030, 1030.688030, 0.000000, X, Y) && !ellipse(26725.480000, 16775.958000, 1606.288046, 1606.288046, 0.000000, X, Y) && !ellipse(30289.882568, 21620.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.535553, 23019.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.671320, 20446.064000, 1375.136040, 1375.136040, 0.000000, X, Y) && !ellipse(29630.917572, 17618.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28669.645630, 20653.617020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28489.432861, 22048.572067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31143.819641, 18329.201263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.309906, 20434.040787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31952.748657, 17700.020386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.066300, 21777.112439, 1371.056039, 891.387855, -0.000000, X, Y) && !ellipse(29846.033356, 21604.921982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.943695, 20811.093445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.186600, 18105.568600, 714.917621, 714.917621, 0.000000, X, Y) && !ellipse(27875.892000, 23803.716000, 2550.048073, 2550.048073, 0.000000, X, Y) && !ellipse(27133.161591, 22484.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28190.078308, 18584.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.596863, 19349.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.802612, 23350.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.525574, 19002.095871, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:47 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183.gif
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_bgd.evt exist, delete to re-create
[Mon May 27 04:23:13 2013] Mean detx,y = (-265.26, -8557.15) 
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_bgd.img exist, delete to re-create
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_bgd.pi exist, delete to re-create
[Mon May 27 04:23:13 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_src_b10.pi.gz
[Mon May 27 04:23:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_bgd.pi.gz
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183.rmf exists, delete to re-create
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src183.arf exists, delete to re-create