[Mon May 27 04:07:47 2013] Detection parameters:
  Position = (328.0, 254.0) = 15 1 41.67 -41 53 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 307.5 +/- 29.0
  Background counts = 243.5
  Rate = 0.006 +/- 0.0006

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 3.87'
[Mon May 27 04:11:26 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Mon May 27 04:11:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.681
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.36"
[Mon May 27 04:11:30 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src51.ximg exists
[Mon May 27 04:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src51.csv
[Mon May 27 04:11:30 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon May 27 04:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src51.csv
[Mon May 27 04:11:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:33 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon May 27 04:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon May 27 04:11:33 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon May 27 04:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon May 27 04:11:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:13:34 2013] Spatial fit model total counts = 3642.950000, observed total counts = 3067.000000
[Mon May 27 04:13:34 2013] Poor agreement between spatial fit and data for source 157
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:15:43 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Mon May 27 04:15:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.681
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 8.36"
[Mon May 27 04:15:47 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src51.ximg exists
[Mon May 27 04:15:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src51.csv
[Mon May 27 04:15:47 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src51_1.ximg exists
[Mon May 27 04:15:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src51.csv
[Mon May 27 04:15:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Mon May 27 04:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Mon May 27 04:15:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Mon May 27 04:15:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:58 2013] Spatial fit model total counts = 3577.490000, observed total counts = 3067.000000
[Mon May 27 04:17:58 2013] Poor agreement between spatial fit and data for source 157
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:17:59 2013] Source is confused with source 130
[Mon May 27 04:22:48 2013] XMMSAS src. selection expression = ellipse(28489.432861, 22048.572067, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 04:22:48 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_src.reg
[Mon May 27 04:22:48 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (291, 216) - (366, 291)
[Mon May 27 04:22:48 2013] XMMSAS bgd. selection expression = annulus(28489.432861, 22048.572067, 1087.500000, 2175.000000, X, Y) && !ellipse(31008.880000, 17204.380000, 3438.320099, 3438.320099, 0.000000, X, Y) && !ellipse(30484.028931, 20994.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30807.063690, 19198.329086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25814.800000, 17921.354000, 3167.184091, 1091.712031, 128.393000, X, Y) && !ellipse(29701.405945, 22847.346924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29232.867000, 24679.152200, 579.966417, 579.966417, 0.000000, X, Y) && !ellipse(29042.992000, 22639.844000, 1030.688030, 1030.688030, 0.000000, X, Y) && !ellipse(30289.882568, 21620.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.535553, 23019.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30123.242000, 20322.246400, 949.976027, 949.976027, 0.000000, X, Y) && !ellipse(28598.671320, 20446.064000, 1375.136040, 1375.136040, 0.000000, X, Y) && !ellipse(28669.645630, 20653.617020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29302.309906, 20434.040787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25552.191200, 24428.663200, 1034.016030, 1034.016030, 0.000000, X, Y) && !ellipse(28039.588593, 24471.215942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28303.968445, 24051.769104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.066300, 21777.112439, 1371.056039, 891.387855, -0.000000, X, Y) && !ellipse(25772.762800, 24710.286000, 1097.304032, 1097.304032, 0.000000, X, Y) && !ellipse(29846.033356, 21604.921982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.943695, 20811.093445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.892000, 23803.716000, 2550.048073, 2550.048073, 0.000000, X, Y) && !ellipse(27903.851800, 24898.648000, 1199.360035, 1199.360035, 0.000000, X, Y) && !ellipse(29550.401154, 23963.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.896332, 23804.041595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27133.161591, 22484.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26195.506134, 21283.387314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.596863, 19349.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.802612, 23350.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.343109, 21963.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.128693, 23872.610382, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:48 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157.gif
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_bgd.evt exist, delete to re-create
[Mon May 27 04:23:14 2013] Mean detx,y = (569.58, -6122.40) 
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_bgd.img exist, delete to re-create
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_bgd.pi exist, delete to re-create
[Mon May 27 04:23:14 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_src_b10.pi.gz
[Mon May 27 04:23:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_bgd.pi.gz
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 04:24:25 2013] rmf not generated due to insufficient counts
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src157.arf exists, delete to re-create