[Mon May 27 04:07:45 2013] Detection parameters:
  Position = (324.3, 264.7) = 15 1 43.14 -41 52 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 445.4 +/- 34.8
  Background counts = 268.9
  Rate = 0.009 +/- 0.0007

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 3.08'
[Mon May 27 04:11:26 2013] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 7.97"
[Mon May 27 04:11:26 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.97"
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src31.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src31.csv
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src31.csv
[Mon May 27 04:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon May 27 04:11:32 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon May 27 04:13:34 2013] Spatial fit model total counts = 4278.910000, observed total counts = 4199.000000
[Mon May 27 04:13:34 2013] Offset between fit and detection position for source 144 = 2.274641 pixels
[Mon May 27 04:13:34 2013] 4271.110000 total counts/ 3759.420000 bgd. counts: snr = 8.345387
Spatial fit parameters:
  Offset between fit and detection position for source 144 = 2.274641 pixels
  Position = (325.6, 266.6) = 15 1 42.64 -41 52 51.8
  Extent = 15.9 (15.9-31.9)", rotation angle = 0
  Source counts = 511.7 +/- 65.4
  Background counts = 3759.4
  Rate = 0.008 +/- 0.001
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:13:35 2013] Source is confused with source 133
[Mon May 27 04:15:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 15.94"
[Mon May 27 04:15:43 2013] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.923
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 15.94"
[Mon May 27 04:15:46 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src31.ximg exists
[Mon May 27 04:15:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src31.csv
[Mon May 27 04:15:46 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon May 27 04:15:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src31.csv
[Mon May 27 04:15:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon May 27 04:15:51 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon May 27 04:15:51 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon May 27 04:17:58 2013] Warning, spatial fit 31 centroid is now closest to src. 130
[Mon May 27 04:17:59 2013] Spatial fit model total counts = 4370.810000, observed total counts = 4349.000000
[Mon May 27 04:17:59 2013] Offset between fit and detection position for source 144 = 3.216278 pixels
[Mon May 27 04:17:59 2013] Warning, changing simple spatial fit ID from 31 to 98
[Mon May 27 04:17:59 2013] 4369.509200 total counts/ 4312.170000 bgd. counts: snr = 0.873180
Spatial fit parameters:
  Offset between fit and detection position for source 144 = 3.216278 pixels
  Position = (323.3, 264.3) = 15 1 43.52 -41 53 1.7
  Extent = 5.2 (1.9-10.1)", rotation angle = 0
  Source counts = 57.3 +/- 66.1
  Background counts = 4312.2
  Rate = 0.0009 +/- 0.001
  Deleting source due to low Poisson probability