[Mon May 27 04:07:43 2013] Detection parameters:
  Position = (325.9, 277.0) = 15 1 42.51 -41 52 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.0 +/- 31.8
  Background counts = 261.5
  Rate = 0.005 +/- 0.0005

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 2.52'
[Mon May 27 04:11:26 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Mon May 27 04:11:26 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 7.69"
[Mon May 27 04:11:30 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src72.ximg exists
[Mon May 27 04:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src72.csv
[Mon May 27 04:11:30 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon May 27 04:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src72.csv
[Mon May 27 04:11:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:33 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon May 27 04:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon May 27 04:11:33 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon May 27 04:11:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon May 27 04:11:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:13:35 2013] Spatial fit model total counts = 4093.320000, observed total counts = 3694.000000
[Mon May 27 04:13:35 2013] Poor agreement between spatial fit and data for source 124
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:13:35 2013] Source is confused with source 133
[Mon May 27 04:15:43 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Mon May 27 04:15:43 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 7.69"
[Mon May 27 04:15:48 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src69.ximg exists
[Mon May 27 04:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src69.csv
[Mon May 27 04:15:48 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src69_1.ximg exists
[Mon May 27 04:15:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src69.csv
[Mon May 27 04:15:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:52 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Mon May 27 04:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src69.csv
[Mon May 27 04:15:52 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Mon May 27 04:15:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src69.csv
[Mon May 27 04:15:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:58 2013] Spatial fit model total counts = 4086.830000, observed total counts = 3694.000000
[Mon May 27 04:17:58 2013] Poor agreement between spatial fit and data for source 124
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:22:50 2013] XMMSAS src. selection expression = ellipse(28303.968445, 24051.769104, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 04:22:50 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_src.reg
[Mon May 27 04:22:50 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (288, 240) - (363, 315)
[Mon May 27 04:22:50 2013] XMMSAS bgd. selection expression = annulus(28303.968445, 24051.769104, 1087.500000, 2175.000000, X, Y) && !ellipse(26298.178000, 28015.000400, 2029.320058, 2029.320058, 0.000000, X, Y) && !ellipse(29701.405945, 22847.346924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29232.867000, 24679.152200, 579.966417, 579.966417, 0.000000, X, Y) && !ellipse(29042.992000, 22639.844000, 1030.688030, 1030.688030, 0.000000, X, Y) && !ellipse(30289.882568, 21620.654358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28446.535553, 23019.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28489.432861, 22048.572067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25552.191200, 24428.663200, 1034.016030, 1034.016030, 0.000000, X, Y) && !ellipse(28039.588593, 24471.215942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26662.066300, 21777.112439, 1371.056039, 891.387855, -0.000000, X, Y) && !ellipse(25772.762800, 24710.286000, 1097.304032, 1097.304032, 0.000000, X, Y) && !ellipse(26512.305600, 26814.464000, 1084.408031, 1084.408031, 0.000000, X, Y) && !ellipse(29846.033356, 21604.921982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.892000, 23803.716000, 2550.048073, 2550.048073, 0.000000, X, Y) && !ellipse(27903.851800, 24898.648000, 1199.360035, 1199.360035, 0.000000, X, Y) && !ellipse(29550.401154, 23963.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.896332, 23804.041595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27133.161591, 22484.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26195.506134, 21283.387314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27310.591888, 25385.339874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.802612, 23350.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.343109, 21963.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.128693, 23872.610382, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:50 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124.gif
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_bgd.evt exist, delete to re-create
[Mon May 27 04:23:14 2013] Mean detx,y = (-66.82, -4346.81) 
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_bgd.img exist, delete to re-create
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_bgd.pi exist, delete to re-create
[Mon May 27 04:23:14 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_src_b10.pi.gz
[Mon May 27 04:23:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_bgd.pi.gz
[Mon May 27 04:23:14 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 04:24:25 2013] rmf not generated due to insufficient counts
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src124.arf exists, delete to re-create