[Mon May 27 04:07:43 2013] Detection parameters:
  Position = (274.8, 278.7) = 15 2 2.40 -41 51 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.6 +/- 31.3
  Background counts = 361.3
  Rate = 0.004 +/- 0.0005

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 2.23'
[Mon May 27 04:11:26 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Mon May 27 04:11:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 102 for pass 0, mean size = 7.54"
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:15:44 2013] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:44 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Mon May 27 04:15:44 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Mon May 27 04:15:44 2013] Giving source the simple spatial ID 96 for pass 1, mean size = 7.54"
[Mon May 27 04:15:49 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src96.ximg exists
[Mon May 27 04:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src96.csv
[Mon May 27 04:15:49 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src96_1.ximg exists
[Mon May 27 04:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src96.csv
[Mon May 27 04:15:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:54 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Mon May 27 04:15:54 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Mon May 27 04:15:54 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src96 appears to have run properly
[Mon May 27 04:17:59 2013] Spatial fit model total counts = 3880.070000, observed total counts = 3876.000000
[Mon May 27 04:17:59 2013] Offset between fit and detection position for source 122 = 0.296814 pixels
[Mon May 27 04:17:59 2013] 3777.412000 total counts/ 3698.420000 bgd. counts: snr = 1.298898
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 0.296814 pixels
  Position = (274.9, 278.5) = 15 2 2.36 -41 51 59.9
  Extent = 3.6 (1.9-4.7)", rotation angle = 0
  Source counts = 79.0 +/- 61.5
  Background counts = 3698.4
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability