[Mon May 27 04:07:42 2013] Detection parameters:
  Position = (336.6, 284.0) = 15 1 38.35 -41 51 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.9 +/- 35.8
  Background counts = 207.2
  Rate = 0.009 +/- 0.0006

[Mon May 27 04:07:58 2013] Off-axis axis estimate = 2.96'
[Mon May 27 04:11:26 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:26 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Mon May 27 04:11:26 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.931
[Mon May 27 04:11:26 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.91"
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src29.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src29.csv
[Mon May 27 04:11:29 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May 27 04:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src29.csv
[Mon May 27 04:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May 27 04:11:32 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May 27 04:11:32 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon May 27 04:13:34 2013] Spatial fit model total counts = 2719.140000, observed total counts = 2560.000000
[Mon May 27 04:13:34 2013] Offset between fit and detection position for source 119 = 0.193993 pixels
[Mon May 27 04:13:34 2013] 2629.494000 total counts/ 2243.520000 bgd. counts: snr = 8.148789
Spatial fit parameters:
  Offset between fit and detection position for source 119 = 0.193993 pixels
  Position = (336.6, 284.2) = 15 1 38.32 -41 51 34.9
  Extent = 7.7 (6.5-9.3)", rotation angle = 0
  Source counts = 386.0 +/- 51.3
  Background counts = 2243.5
  Rate = 0.006 +/- 0.0008
[Mon May 27 04:13:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:13:35 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:13:35 2013] Source does appear to be extended
[Mon May 27 04:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:15:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:43 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Mon May 27 04:15:43 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.976
[Mon May 27 04:15:43 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 7.67"
[Mon May 27 04:15:46 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src29.ximg exists
[Mon May 27 04:15:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src29.csv
[Mon May 27 04:15:46 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon May 27 04:15:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src29.csv
[Mon May 27 04:15:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:50 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon May 27 04:15:50 2013] fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May 27 04:15:50 2013] Fit fullrun_mos2_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon May 27 04:17:58 2013] Spatial fit model total counts = 2839.870000, observed total counts = 2634.000000
[Mon May 27 04:17:58 2013] Offset between fit and detection position for source 119 = 0.073381 pixels
[Mon May 27 04:17:58 2013] 2744.621000 total counts/ 2385.460000 bgd. counts: snr = 7.353652
Spatial fit parameters:
  Offset between fit and detection position for source 119 = 0.073381 pixels
  Position = (336.6, 284.2) = 15 1 38.35 -41 51 34.9
  Extent = 7.2 (6.2-8.8)", rotation angle = 0
  Source counts = 359.2 +/- 52.4
  Background counts = 2385.5
  Rate = 0.006 +/- 0.0009
[Mon May 27 04:17:59 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:59 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:59 2013] Source does appear to be extended
[Mon May 27 04:17:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:17:59 2013] Source is confused with source 130
[Mon May 27 04:22:44 2013] XMMSAS src. selection expression = ellipse(29232.867000, 24679.152200, 434.974813, 434.974813, 0.000000, X, Y)
[Mon May 27 04:22:44 2013] Not overwriting source region fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_src.reg
[Mon May 27 04:22:44 2013] Extracting stamp from image fullrun_mos2_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (312, 259) - (362, 309)
[Mon May 27 04:22:44 2013] XMMSAS bgd. selection expression = annulus(29232.867000, 24679.152200, 724.958021, 1449.916042, X, Y) && !ellipse(26298.178000, 28015.000400, 2029.320058, 2029.320058, 0.000000, X, Y) && !ellipse(29701.405945, 22847.346924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.992000, 22639.844000, 1030.688030, 1030.688030, 0.000000, X, Y) && !ellipse(28446.535553, 23019.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28039.588593, 24471.215942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28303.968445, 24051.769104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.892000, 23803.716000, 2550.048073, 2550.048073, 0.000000, X, Y) && !ellipse(27903.851800, 24898.648000, 1199.360035, 1199.360035, 0.000000, X, Y) && !ellipse(29550.401154, 23963.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27133.161591, 22484.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27310.591888, 25385.339874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.802612, 23350.594452, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:22:44 2013] Writing fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119.gif
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_src.evt and ../../xmm0077340101/products/events/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_bgd.evt exist, delete to re-create
[Mon May 27 04:23:13 2013] Mean detx,y = (-1237.07, -4201.08) 
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_src.img and ../../xmm0077340101/products/images/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_bgd.img exist, delete to re-create
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_bgd.pi exist, delete to re-create
[Mon May 27 04:23:13 2013] Setting source spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_src_b10.pi.gz
[Mon May 27 04:23:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_bgd.pi.gz
[Mon May 27 04:23:13 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119_bgd.lc exist, delete to re-create
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119.rmf exists, delete to re-create
[Mon May 27 04:24:25 2013] fullrun_mos2_xmm0077340101_pi300-10000_pass1_cl_src119.arf exists, delete to re-create