[Mon May 27 04:07:12 2013] Detection parameters:
  Position = (297.2, 286.8) = 15 1 53.66 -41 51 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.8 +/- 32.3
  Background counts = 324.1
  Rate = 0.004 +/- 0.0006

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 0.85'
[Mon May 27 04:11:20 2013] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 6.85"
[Mon May 27 04:11:20 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 6.85"
[Mon May 27 04:11:23 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src80.ximg exists
[Mon May 27 04:11:23 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src80.csv
[Mon May 27 04:11:23 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src80_1.ximg exists
[Mon May 27 04:11:23 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src80.csv
[Mon May 27 04:11:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:26 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Mon May 27 04:11:26 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Mon May 27 04:11:26 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Mon May 27 04:12:58 2013] Spatial fit model total counts = 4023.450000, observed total counts = 4021.000000
[Mon May 27 04:12:58 2013] Offset between fit and detection position for source 92 = 4.189072 pixels
[Mon May 27 04:12:58 2013] 3963.764000 total counts/ 3397.050000 bgd. counts: snr = 9.723284
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 4.189072 pixels
  Position = (298.1, 282.7) = 15 1 53.33 -41 51 41.4
  Extent = 13.7 (13.5-27.4)", rotation angle = 0
  Source counts = 566.7 +/- 63.0
  Background counts = 3397.1
  Rate = 0.009 +/- 0.001
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 109
[Mon May 27 04:15:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:33 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Mon May 27 04:15:33 2013] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.051
[Mon May 27 04:15:33 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 13.70"
[Mon May 27 04:15:37 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src75.ximg exists
[Mon May 27 04:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src75.csv
[Mon May 27 04:15:37 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src75_1.ximg exists
[Mon May 27 04:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src75.csv
[Mon May 27 04:15:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:42 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Mon May 27 04:15:42 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Mon May 27 04:15:42 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Mon May 27 04:17:20 2013] Warning, spatial fit 75 centroid is now closest to src. 112
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:21:07 2013] XMMSAS src. selection expression = ellipse(25885.371400, 24549.744000, 822.132024, 822.132024, 0.000000, X, Y)
[Mon May 27 04:21:07 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_src.reg
[Mon May 27 04:21:07 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (251, 235) - (345, 330)
[Mon May 27 04:21:07 2013] XMMSAS bgd. selection expression = annulus(25885.371400, 24549.744000, 1370.220039, 2740.440079, X, Y) && !ellipse(26315.040000, 28068.156000, 866.432025, 866.432025, 0.000000, X, Y) && !ellipse(28355.073200, 23068.509400, 1283.640037, 1283.640037, 0.000000, X, Y) && !ellipse(28997.900177, 22454.038849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.972000, 28474.962000, 1231.312035, 1231.312035, 0.000000, X, Y) && !ellipse(24074.947000, 25337.739000, 1063.544031, 1063.544031, 0.000000, X, Y) && !ellipse(29210.798800, 24689.488200, 646.489619, 646.489619, 0.000000, X, Y) && !ellipse(23847.272000, 29758.200000, 2541.472073, 2541.472073, 0.000000, X, Y) && !ellipse(26482.681800, 21919.998000, 1316.320038, 1316.320038, 0.000000, X, Y) && !ellipse(25790.716746, 24376.008400, 1129.944033, 1129.944033, 0.000000, X, Y) && !ellipse(28601.550200, 20460.677600, 1438.672041, 1438.672041, 0.000000, X, Y) && !ellipse(26557.726471, 26494.159760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.844000, 23934.899000, 1222.576035, 1222.576035, 0.000000, X, Y) && !ellipse(27652.722200, 27545.107000, 355.505610, 355.505610, 0.000000, X, Y) && !ellipse(26332.887970, 21619.476852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.614000, 21560.092000, 1327.216038, 1327.216038, 0.000000, X, Y) && !ellipse(28171.024000, 24252.602000, 1185.568034, 1185.568034, 0.000000, X, Y) && !ellipse(27954.802887, 24737.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23184.278000, 28458.820000, 1270.736037, 1270.736037, 0.000000, X, Y) && !ellipse(28301.340000, 23093.960000, 1293.712037, 1293.712037, 0.000000, X, Y) && !ellipse(29227.000000, 21089.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.476624, 24150.281311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22794.408295, 24796.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.192000, 25126.212000, 2418.064070, 2418.064070, 0.000000, X, Y) && !ellipse(24565.249115, 23245.728760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.715118, 24894.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.000000, 24087.645200, 2445.152070, 574.807217, 90.003000, X, Y) && !ellipse(26961.317474, 23300.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.152832, 26340.938019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.200000, 29121.470000, 1888.872054, 1888.872054, 0.000000, X, Y)
[Mon May 27 04:21:07 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92.gif
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_bgd.evt exist, delete to re-create
[Mon May 27 04:21:35 2013] Mean detx,y = (-2632.31, -2037.92) 
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_bgd.img exist, delete to re-create
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_bgd.pi exist, delete to re-create
[Mon May 27 04:21:35 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Mon May 27 04:21:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src92.arf exists, delete to re-create