[Mon May 27 04:07:12 2013] Detection parameters:
  Position = (220.2, 298.1) = 15 2 23.66 -41 50 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.2 +/- 25.6
  Background counts = 184.9
  Rate = 0.005 +/- 0.0006

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 5.67'
[Mon May 27 04:11:20 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Mon May 27 04:11:20 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 9.27"
[Mon May 27 04:11:23 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src68.ximg exists
[Mon May 27 04:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src68.csv
[Mon May 27 04:11:23 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src68_1.ximg exists
[Mon May 27 04:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src68.csv
[Mon May 27 04:11:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Mon May 27 04:11:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Mon May 27 04:11:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Mon May 27 04:11:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:12:57 2013] Warning, spatial fit 68 centroid is now closest to src. 83
[Mon May 27 04:12:58 2013] Spatial fit model total counts = 2154.100000, observed total counts = 2152.000000
[Mon May 27 04:12:58 2013] Offset between fit and detection position for source 87 = 1.230476 pixels
[Mon May 27 04:12:58 2013] Warning, changing simple spatial fit ID from 68 to 90
[Mon May 27 04:12:58 2013] 2119.734000 total counts/ 1617.830000 bgd. counts: snr = 12.478265
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 1.230476 pixels
  Position = (221.3, 297.6) = 15 2 23.21 -41 50 36.4
  Extent = 18.9 (18.9-18.9)", rotation angle = 0
  Source counts = 501.9 +/- 46.0
  Background counts = 1617.8
  Rate = 0.008 +/- 0.0007
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 75
[Mon May 27 04:15:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:33 2013] Initial guess for spatial extent in simple fitting = 18.88"
[Mon May 27 04:15:33 2013] source mask rpix=4.3, npix_max = 93, mask sum = 79, frac = 0.843
[Mon May 27 04:15:33 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 18.88"
[Mon May 27 04:15:36 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src64.ximg exists
[Mon May 27 04:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src64.csv
[Mon May 27 04:15:36 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src64_1.ximg exists
[Mon May 27 04:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src64.csv
[Mon May 27 04:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:41 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Mon May 27 04:15:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Mon May 27 04:15:41 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Mon May 27 04:15:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Mon May 27 04:15:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:20 2013] Warning, spatial fit 64 centroid is now closest to src. 106
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:21:06 2013] XMMSAS src. selection expression = ellipse(19208.380000, 25844.965200, 1132.794033, 1132.794033, 0.000000, X, Y)
[Mon May 27 04:21:06 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_src.reg
[Mon May 27 04:21:06 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (156, 233) - (286, 363)
[Mon May 27 04:21:06 2013] XMMSAS bgd. selection expression = annulus(19208.380000, 25844.965200, 1887.990054, 3775.980109, X, Y) && !ellipse(22032.926000, 30829.996000, 1469.432042, 1469.432042, 0.000000, X, Y) && !ellipse(23847.272000, 29758.200000, 2541.472073, 2541.472073, 0.000000, X, Y) && !ellipse(23872.466000, 29466.095200, 1281.160037, 607.711217, 31.266400, X, Y) && !ellipse(19866.092850, 26442.654846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.664000, 29399.126200, 1397.192040, 1397.192040, 0.000000, X, Y) && !ellipse(21115.585400, 21280.789600, 1186.744034, 1186.744034, 0.000000, X, Y) && !ellipse(23184.278000, 28458.820000, 1270.736037, 1270.736037, 0.000000, X, Y) && !ellipse(18689.401123, 25624.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16353.216949, 28085.456879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17442.426788, 24054.856903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17430.965027, 25963.610565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19380.898000, 21993.866000, 1060.128031, 1060.128031, 0.000000, X, Y) && !ellipse(18423.197266, 22408.202423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20676.637451, 21521.627075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.476624, 24150.281311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18704.500275, 23004.038788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22794.408295, 24796.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19935.202000, 19458.492000, 3171.744091, 3171.744091, 0.000000, X, Y) && !ellipse(18034.939056, 23047.674194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.715118, 24894.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18039.912000, 25354.096000, 1510.704043, 1510.704043, 0.000000, X, Y) && !ellipse(21161.344910, 30143.457703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.257034, 30112.189423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15434.225021, 23373.342743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23209.246000, 30085.552000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(14742.202255, 27270.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18202.973206, 22119.744110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15951.205688, 29089.705780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.200000, 29121.470000, 1888.872054, 1888.872054, 0.000000, X, Y) && !ellipse(15930.597351, 23541.769836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15716.518356, 28385.892029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15208.943130, 26752.119751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15913.185669, 25860.359131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15851.527924, 24846.889313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16661.157867, 21449.641266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15533.582855, 25966.544373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15134.553192, 24516.643494, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:21:06 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87.gif
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_bgd.evt exist, delete to re-create
[Mon May 27 04:21:35 2013] Mean detx,y = (1446.81, -7551.35) 
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_bgd.img exist, delete to re-create
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_bgd.pi exist, delete to re-create
[Mon May 27 04:21:35 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Mon May 27 04:21:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src87.arf exists, delete to re-create