[Mon May 27 04:07:08 2013] Detection parameters:
  Position = (249.0, 338.4) = 15 2 12.43 -41 47 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.1 +/- 27.0
  Background counts = 319.5
  Rate = 0.006 +/- 0.0006

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 4.61'
[Mon May 27 04:11:20 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Mon May 27 04:11:20 2013] source mask rpix=2.0, npix_max = 25, mask sum = 26, frac = 1.034
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 8.73"
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src49.ximg exists
[Mon May 27 04:11:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src49.csv
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon May 27 04:11:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src49.csv
[Mon May 27 04:11:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon May 27 04:11:25 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon May 27 04:12:57 2013] Spatial fit model total counts = 3481.830000, observed total counts = 3291.000000
[Mon May 27 04:12:57 2013] Offset between fit and detection position for source 55 = 2.721930 pixels
[Mon May 27 04:12:57 2013] 3483.276000 total counts/ 2881.310000 bgd. counts: snr = 11.214424
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 2.721930 pixels
  Position = (251.7, 338.5) = 15 2 11.37 -41 47 38.8
  Extent = 17.5 (17.4-34.9)", rotation angle = 0
  Source counts = 602.0 +/- 59.0
  Background counts = 2881.3
  Rate = 0.01 +/- 0.001
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 49
[Mon May 27 04:15:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:32 2013] Initial guess for spatial extent in simple fitting = 17.46"
[Mon May 27 04:15:32 2013] source mask rpix=4.0, npix_max = 81, mask sum = 69, frac = 0.846
[Mon May 27 04:15:32 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 17.46"
[Mon May 27 04:15:36 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src47.ximg exists
[Mon May 27 04:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src47.csv
[Mon May 27 04:15:36 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon May 27 04:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src47.csv
[Mon May 27 04:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:41 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon May 27 04:15:41 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon May 27 04:15:41 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon May 27 04:17:20 2013] Warning, spatial fit 47 centroid is now closest to src. 46
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:21:04 2013] XMMSAS src. selection expression = ellipse(21850.664000, 29399.126200, 1047.894030, 1047.894030, 0.000000, X, Y)
[Mon May 27 04:21:04 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_src.reg
[Mon May 27 04:21:04 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (191, 278) - (312, 399)
[Mon May 27 04:21:04 2013] XMMSAS bgd. selection expression = annulus(21850.664000, 29399.126200, 1746.490050, 3492.980101, X, Y) && !ellipse(18834.164000, 33324.464000, 3306.352095, 3306.352095, 0.000000, X, Y) && !ellipse(19896.633600, 32692.245000, 1620.800047, 801.544023, 42.025200, X, Y) && !ellipse(20090.400000, 32573.816000, 1653.176048, 1653.176048, 0.000000, X, Y) && !ellipse(18535.722000, 33675.208200, 1718.280049, 1718.280049, 0.000000, X, Y) && !ellipse(21272.342000, 31617.026000, 1363.176039, 1363.176039, 319.067700, X, Y) && !ellipse(21703.500565, 31013.502838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.750809, 32933.200531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.926000, 30829.996000, 1469.432042, 1469.432042, 0.000000, X, Y) && !ellipse(20582.390549, 32836.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.972000, 28474.962000, 1231.312035, 1231.312035, 0.000000, X, Y) && !ellipse(24074.947000, 25337.739000, 1063.544031, 1063.544031, 0.000000, X, Y) && !ellipse(23847.272000, 29758.200000, 2541.472073, 2541.472073, 0.000000, X, Y) && !ellipse(18027.578000, 33821.332000, 3636.704105, 1369.344039, 32.219000, X, Y) && !ellipse(23872.466000, 29466.095200, 1281.160037, 607.711217, 31.266400, X, Y) && !ellipse(19866.092850, 26442.654846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19208.380000, 25844.965200, 1510.392043, 1510.392043, 0.000000, X, Y) && !ellipse(24185.394073, 30707.096527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.731780, 31541.857400, 959.744028, 959.744028, 0.000000, X, Y) && !ellipse(23184.278000, 28458.820000, 1270.736037, 1270.736037, 0.000000, X, Y) && !ellipse(18689.401123, 25624.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.192000, 25126.212000, 2418.064070, 2418.064070, 0.000000, X, Y) && !ellipse(18039.912000, 25354.096000, 1510.704043, 1510.704043, 0.000000, X, Y) && !ellipse(21161.344910, 30143.457703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.972809, 31700.135895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.257034, 30112.189423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20027.433670, 31499.062561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23209.246000, 30085.552000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(26687.000000, 24087.645200, 2445.152070, 574.807217, 90.003000, X, Y) && !ellipse(25844.152832, 26340.938019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23238.607971, 32214.749603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.200000, 29121.470000, 1888.872054, 1888.872054, 0.000000, X, Y)
[Mon May 27 04:21:04 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55.gif
[Mon May 27 04:21:34 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Mon May 27 04:21:34 2013] Mean detx,y = (3527.44, -3461.79) 
[Mon May 27 04:21:34 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Mon May 27 04:21:34 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Mon May 27 04:21:34 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon May 27 04:21:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon May 27 04:21:34 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src55.arf exists, delete to re-create