[Mon May 27 04:07:05 2013] Detection parameters:
  Position = (237.1, 378.0) = 15 2 17.03 -41 44 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.8 +/- 27.3
  Background counts = 190.7
  Rate = 0.01 +/- 0.0007

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 7.28'
[Mon May 27 04:11:20 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon May 27 04:11:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.694
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.07"
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src24.ximg exists
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon May 27 04:11:22 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src24 appears to have run properly
[Mon May 27 04:11:24 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon May 27 04:11:24 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon May 27 04:11:24 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon May 27 04:12:56 2013] Warning, spatial fit 24 centroid is now closest to src. 30
[Mon May 27 04:12:57 2013] Source 33 is offset by -0.627166 and 2.994351 pixels which is larger than
2 X fitted extent = 1.957012 x 1.957012, not incorporating fit results
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 38
[Mon May 27 04:15:32 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:32 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon May 27 04:15:32 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.694
[Mon May 27 04:15:32 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 10.07"
[Mon May 27 04:15:34 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src24.ximg exists
[Mon May 27 04:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src24.csv
[Mon May 27 04:15:34 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon May 27 04:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src24.csv
[Mon May 27 04:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:39 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon May 27 04:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon May 27 04:15:39 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon May 27 04:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon May 27 04:15:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:19 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 13.733322 pixels away
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:20:59 2013] XMMSAS src. selection expression = ellipse(20582.390549, 32836.926514, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 27 04:20:59 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_src.reg
[Mon May 27 04:20:59 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (200, 340) - (275, 415)
[Mon May 27 04:20:59 2013] XMMSAS bgd. selection expression = annulus(20582.390549, 32836.926514, 1087.500000, 2175.000000, X, Y) && !ellipse(18834.164000, 33324.464000, 3306.352095, 3306.352095, 0.000000, X, Y) && !ellipse(19896.633600, 32692.245000, 1620.800047, 801.544023, 42.025200, X, Y) && !ellipse(20090.400000, 32573.816000, 1653.176048, 1653.176048, 0.000000, X, Y) && !ellipse(18535.722000, 33675.208200, 1718.280049, 1718.280049, 0.000000, X, Y) && !ellipse(21272.342000, 31617.026000, 1363.176039, 1363.176039, 319.067700, X, Y) && !ellipse(21703.500565, 31013.502838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.750809, 32933.200531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.926000, 30829.996000, 1469.432042, 1469.432042, 0.000000, X, Y) && !ellipse(23847.272000, 29758.200000, 2541.472073, 2541.472073, 0.000000, X, Y) && !ellipse(18027.578000, 33821.332000, 3636.704105, 1369.344039, 32.219000, X, Y) && !ellipse(23872.466000, 29466.095200, 1281.160037, 607.711217, 31.266400, X, Y) && !ellipse(21850.664000, 29399.126200, 1397.192040, 1397.192040, 0.000000, X, Y) && !ellipse(23545.731780, 31541.857400, 959.744028, 959.744028, 0.000000, X, Y) && !ellipse(21161.344910, 30143.457703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.972809, 31700.135895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.257034, 30112.189423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20027.433670, 31499.062561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20119.354767, 34870.559479, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23209.246000, 30085.552000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(23238.607971, 32214.749603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.200000, 29121.470000, 1888.872054, 1888.872054, 0.000000, X, Y)
[Mon May 27 04:20:59 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33.gif
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Mon May 27 04:21:33 2013] Mean detx,y = (7141.45, -3233.67) 
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Mon May 27 04:21:33 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon May 27 04:21:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 27 04:22:35 2013] rmf not generated due to insufficient counts
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src33.arf exists, delete to re-create