[Mon May 27 04:07:29 2013] Detection parameters:
  Position = (321.9, 127.2) = 15 1 44.05 -42 2 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 630.7 +/- 37.0
  Background counts = 151.6
  Rate = 0.01 +/- 0.0006

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 12.53'
[Mon May 27 04:11:20 2013] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 12.69"
[Mon May 27 04:11:20 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.027
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 12.69"
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src26.ximg exists
[Mon May 27 04:11:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src26.csv
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon May 27 04:11:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src26.csv
[Mon May 27 04:11:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:24 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon May 27 04:11:24 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon May 27 04:11:24 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Mon May 27 04:12:57 2013] Spatial fit model total counts = 2492.700000, observed total counts = 2565.000000
[Mon May 27 04:12:57 2013] Offset between fit and detection position for source 216 = 1.279383 pixels
[Mon May 27 04:12:57 2013] 2618.622000 total counts/ 54.992000 bgd. counts: snr = 345.704942
Spatial fit parameters:
  Offset between fit and detection position for source 216 = 1.279383 pixels
  Position = (323.1, 127.1) = 15 1 43.55 -42 2 58.4
  Extent = 25.4 (25.3-50.8)", rotation angle = 0
  Source counts = 2563.6 +/- 51.2
  Background counts = 55.0
  Rate = 0.04 +/- 0.0008
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 212
[Mon May 27 04:12:58 2013] Source is confused with source 51
[Mon May 27 04:12:58 2013] Source is confused with source 206
[Mon May 27 04:15:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 04:15:32 2013] Initial guess for spatial extent in simple fitting = 25.39"
[Mon May 27 04:15:32 2013] source mask rpix=5.8, npix_max = 160, mask sum = 103, frac = 0.641
[Mon May 27 04:15:32 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 25.39"
[Mon May 27 04:15:34 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src26.ximg exists
[Mon May 27 04:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src26.csv
[Mon May 27 04:15:34 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon May 27 04:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src26.csv
[Mon May 27 04:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:39 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon May 27 04:15:39 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon May 27 04:15:39 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon May 27 04:17:19 2013] Warning, spatial fit 26 centroid is now closest to src. 51
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:21:00 2013] Counts = 2563.630000, rescaling region sizes by 2.000000
[Mon May 27 04:21:00 2013] XMMSAS src. selection expression = ellipse(28065.181400, 11009.546200, 3046.236088, 3046.236088, 0.000000, X, Y)
[Mon May 27 04:21:00 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_src.reg
[Mon May 27 04:21:00 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (148, 0) - (498, 302)
[Mon May 27 04:21:00 2013] XMMSAS bgd. selection expression = annulus(28065.181400, 11009.546200, 10154.120292, 20308.240584, X, Y) && !ellipse(26315.040000, 28068.156000, 866.432025, 866.432025, 0.000000, X, Y) && !ellipse(30999.577209, 17697.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30631.769400, 18608.996000, 1059.408030, 1059.408030, 0.000000, X, Y) && !ellipse(30482.369537, 14831.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30644.612800, 19732.882000, 1187.664034, 1187.664034, 0.000000, X, Y) && !ellipse(30694.795600, 15733.223000, 1472.448042, 812.152023, 275.896000, X, Y) && !ellipse(30442.204000, 20158.654000, 1554.320045, 1116.512032, 358.921000, X, Y) && !ellipse(30497.606800, 20985.523000, 1472.448042, 668.204019, 255.466000, X, Y) && !ellipse(18834.164000, 33324.464000, 3306.352095, 3306.352095, 0.000000, X, Y) && !ellipse(19896.633600, 32692.245000, 1620.800047, 801.544023, 42.025200, X, Y) && !ellipse(20090.400000, 32573.816000, 1653.176048, 1653.176048, 0.000000, X, Y) && !ellipse(30871.670000, 16351.878000, 2284.600066, 2284.600066, 0.000000, X, Y) && !ellipse(30922.063629, 17003.724350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21272.342000, 31617.026000, 1363.176039, 1363.176039, 319.067700, X, Y) && !ellipse(26448.712000, 17940.376000, 424.427212, 424.427212, 0.000000, X, Y) && !ellipse(21703.500565, 31013.502838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.638000, 19882.104600, 1488.312043, 1488.312043, 0.000000, X, Y) && !ellipse(22032.926000, 30829.996000, 1469.432042, 1469.432042, 0.000000, X, Y) && !ellipse(29487.784000, 13406.706000, 1113.560032, 1113.560032, 0.000000, X, Y) && !ellipse(28355.073200, 23068.509400, 1283.640037, 1283.640037, 0.000000, X, Y) && !ellipse(28604.620000, 12298.306000, 1927.136055, 1927.136055, 0.000000, X, Y) && !ellipse(28997.900177, 22454.038849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29115.180786, 12822.294815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.972000, 28474.962000, 1231.312035, 1231.312035, 0.000000, X, Y) && !ellipse(24074.947000, 25337.739000, 1063.544031, 1063.544031, 0.000000, X, Y) && !ellipse(29993.966000, 22800.120400, 1358.840039, 1358.840039, 0.000000, X, Y) && !ellipse(29210.798800, 24689.488200, 646.489619, 646.489619, 0.000000, X, Y) && !ellipse(28071.950000, 11225.394000, 3854.272111, 3854.272111, 0.000000, X, Y) && !ellipse(23847.272000, 29758.200000, 2541.472073, 2541.472073, 0.000000, X, Y) && !ellipse(26482.681800, 21919.998000, 1316.320038, 1316.320038, 0.000000, X, Y) && !ellipse(18027.578000, 33821.332000, 3636.704105, 1369.344039, 32.219000, X, Y) && !ellipse(25790.716746, 24376.008400, 1129.944033, 1129.944033, 0.000000, X, Y) && !ellipse(26924.040863, 28490.242645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23872.466000, 29466.095200, 1281.160037, 607.711217, 31.266400, X, Y) && !ellipse(30871.798000, 12205.290000, 1955.776056, 1955.776056, 0.000000, X, Y) && !ellipse(19866.092850, 26442.654846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.550200, 20460.677600, 1438.672041, 1438.672041, 0.000000, X, Y) && !ellipse(30228.792999, 21856.221832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.664000, 29399.126200, 1397.192040, 1397.192040, 0.000000, X, Y) && !ellipse(26557.726471, 26494.159760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.127686, 18128.183685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25383.952000, 17306.688000, 1587.776046, 1587.776046, 0.000000, X, Y) && !ellipse(30686.119800, 31375.735600, 331.415307, 331.415307, 0.000000, X, Y) && !ellipse(27651.844000, 23934.899000, 1222.576035, 1222.576035, 0.000000, X, Y) && !ellipse(27652.722200, 27545.107000, 355.505610, 355.505610, 0.000000, X, Y) && !ellipse(26332.887970, 21619.476852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31355.816000, 13807.607600, 940.576027, 757.120822, 90.000000, X, Y) && !ellipse(22906.726654, 20722.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19081.457352, 20568.196762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29874.389069, 15787.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.614000, 21560.092000, 1327.216038, 1327.216038, 0.000000, X, Y) && !ellipse(28171.024000, 24252.602000, 1185.568034, 1185.568034, 0.000000, X, Y) && !ellipse(19208.380000, 25844.965200, 1510.392043, 1510.392043, 0.000000, X, Y) && !ellipse(27817.365295, 12133.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24185.394073, 30707.096527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.731780, 31541.857400, 959.744028, 959.744028, 0.000000, X, Y) && !ellipse(27954.802887, 24737.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30855.313538, 13176.171722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29551.072876, 21526.795090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21115.585400, 21280.789600, 1186.744034, 1186.744034, 0.000000, X, Y) && !ellipse(23184.278000, 28458.820000, 1270.736037, 1270.736037, 0.000000, X, Y) && !ellipse(23144.208405, 12041.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.371400, 24549.744000, 1096.176032, 1096.176032, 0.000000, X, Y) && !ellipse(29251.556366, 19880.039719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18062.121246, 20744.412384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.340000, 23093.960000, 1293.712037, 1293.712037, 0.000000, X, Y) && !ellipse(29600.655548, 16738.518784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.192588, 18906.395200, 824.152024, 824.152024, 0.000000, X, Y) && !ellipse(17468.782000, 20853.016000, 707.417620, 707.417620, 0.000000, X, Y) && !ellipse(29346.808197, 17607.268265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18689.401123, 25624.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.000000, 21089.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16353.216949, 28085.456879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17870.821075, 18395.606201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17442.426788, 24054.856903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.186000, 20306.402000, 1607.064046, 1607.064046, 0.000000, X, Y) && !ellipse(30350.231384, 12733.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17430.965027, 25963.610565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.017609, 12058.349960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19380.898000, 21993.866000, 1060.128031, 1060.128031, 0.000000, X, Y) && !ellipse(18423.197266, 22408.202423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19630.695297, 20570.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22177.337006, 11769.854477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.186615, 17979.986588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20676.637451, 21521.627075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18159.013885, 17786.079178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.476624, 24150.281311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18704.500275, 23004.038788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22794.408295, 24796.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19935.202000, 19458.492000, 3171.744091, 3171.744091, 0.000000, X, Y) && !ellipse(35435.175354, 25898.620758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.192000, 25126.212000, 2418.064070, 2418.064070, 0.000000, X, Y) && !ellipse(27095.053955, 14295.376755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18034.939056, 23047.674194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.249115, 23245.728760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21367.711044, 11660.744720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29175.224274, 16044.863174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.715118, 24894.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30380.995209, 13099.089584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.320923, 14043.752991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18039.912000, 25354.096000, 1510.704043, 1510.704043, 0.000000, X, Y) && !ellipse(21161.344910, 30143.457703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.972809, 31700.135895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.257034, 30112.189423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23625.124481, 13009.532791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20027.433670, 31499.062561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29498.999786, 24048.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.684296, 14480.052628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12758.401535, 20816.941147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15434.225021, 23373.342743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21839.585419, 12963.789291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21621.120316, 12102.358398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41497.507294, 31284.703461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22473.983429, 12490.887421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.033325, 28826.472900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10712.416710, 23070.536652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13019.429413, 27009.726624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14127.209854, 25787.130768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28283.190186, 29527.371429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23209.246000, 30085.552000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(25223.680450, 13227.486801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26975.991821, 12318.781784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18106.606262, 19977.560272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.000000, 24087.645200, 2445.152070, 574.807217, 90.003000, X, Y) && !ellipse(26961.317474, 23300.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22957.347443, 12652.753937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14742.202255, 27270.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18202.973206, 22119.744110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.152832, 26340.938019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28772.790863, 15515.985321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29222.767883, 15621.229355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30211.460968, 11657.047592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22667.460724, 11635.107758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37205.809082, 23236.656525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28532.885071, 28828.445587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15951.205688, 29089.705780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.200000, 29121.470000, 1888.872054, 1888.872054, 0.000000, X, Y) && !ellipse(14218.371613, 23645.724854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17261.148026, 20445.053848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14318.593658, 27776.549530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15930.597351, 23541.769836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19818.550568, 12614.253357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15716.518356, 28385.892029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15208.943130, 26752.119751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15913.185669, 25860.359131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15851.527924, 24846.889313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12559.273010, 27013.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16661.157867, 21449.641266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21541.531830, 18012.444321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12765.175842, 21491.600021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15533.582855, 25966.544373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17480.757446, 18319.060379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15134.553192, 24516.643494, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:21:00 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216.gif
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_bgd.evt exist, delete to re-create
[Mon May 27 04:21:33 2013] Mean detx,y = (-14624.72, -4962.94) 
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_bgd.img exist, delete to re-create
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_bgd.pi exist, delete to re-create
[Mon May 27 04:21:33 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_src_b10.pi.gz
[Mon May 27 04:21:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_bgd.pi.gz
[Mon May 27 04:21:33 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src216.arf exists, delete to re-create