[Mon May 27 04:07:02 2013] Detection parameters:
  Position = (156.9, 411.0) = 15 2 48.16 -41 42 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.6 +/- 25.5
  Background counts = 121.1
  Rate = 0.004 +/- 0.0004

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 13.11'
[Mon May 27 04:11:20 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Mon May 27 04:11:20 2013] source mask rpix=3.0, npix_max = 48, mask sum = 45, frac = 0.926
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 12.98"
[Mon May 27 04:11:24 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src95.ximg exists
[Mon May 27 04:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src95.csv
[Mon May 27 04:11:24 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src95_1.ximg exists
[Mon May 27 04:11:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src95.csv
[Mon May 27 04:11:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:26 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Mon May 27 04:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src95.csv
[Mon May 27 04:11:26 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Mon May 27 04:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src95.csv
[Mon May 27 04:11:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:12:58 2013] Warning, spatial fit 95 centroid is now closest to src. 17
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 11
[Mon May 27 04:15:33 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:33 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Mon May 27 04:15:33 2013] source mask rpix=3.0, npix_max = 48, mask sum = 45, frac = 0.926
[Mon May 27 04:15:33 2013] Giving source the simple spatial ID 88 for pass 1, mean size = 12.98"
[Mon May 27 04:15:37 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src88.ximg exists
[Mon May 27 04:15:37 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src88_1.ximg exists
[Mon May 27 04:15:37 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src88 appears to have run properly
[Mon May 27 04:15:43 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Mon May 27 04:15:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src88.csv
[Mon May 27 04:15:43 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Mon May 27 04:15:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src88.csv
[Mon May 27 04:15:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:17:20 2013] Spatial fit model total counts = 1832.270000, observed total counts = 1669.000000
[Mon May 27 04:17:20 2013] Offset between fit and detection position for source 14 = 0.428821 pixels
[Mon May 27 04:17:20 2013] 1649.147000 total counts/ 1054.010000 bgd. counts: snr = 18.331356
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.428821 pixels
  Position = (156.6, 411.2) = 15 2 48.30 -41 42 21.6
  Extent = 26.0" x 11.6", rotation angle = 333
  Source counts = 595.1 +/- 40.6
  Background counts = 1054.0
  Rate = 0.01 +/- 0.0007
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 2.24
[Mon May 27 04:17:21 2013] Source is asymmetric
[Mon May 27 04:21:08 2013] XMMSAS src. selection expression = ellipse(13574.434126, 35729.869567, 1557.966045, 694.760272, 332.612573, X, Y)
[Mon May 27 04:21:08 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_src.reg
[Mon May 27 04:21:08 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (67, 322) - (246, 501)
[Mon May 27 04:21:08 2013] XMMSAS bgd. selection expression = annulus(13574.434126, 35729.869567, 2596.610075, 5193.220149, X, Y) && !ellipse(18834.164000, 33324.464000, 3306.352095, 3306.352095, 0.000000, X, Y) && !ellipse(19896.633600, 32692.245000, 1620.800047, 801.544023, 42.025200, X, Y) && !ellipse(20090.400000, 32573.816000, 1653.176048, 1653.176048, 0.000000, X, Y) && !ellipse(18535.722000, 33675.208200, 1718.280049, 1718.280049, 0.000000, X, Y) && !ellipse(18176.750809, 32933.200531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18027.578000, 33821.332000, 3636.704105, 1369.344039, 32.219000, X, Y) && !ellipse(11083.804199, 34227.543243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15602.256516, 35446.108765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14304.337479, 35711.550629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15633.013702, 34942.107208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16527.659012, 34656.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15893.331360, 34586.163361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12171.431641, 34925.284943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17022.930832, 33027.462036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10609.197800, 33709.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11015.469055, 33450.217041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16416.474350, 33689.684753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19575.741501, 38782.843384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20119.354767, 34870.559479, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(12539.373566, 34845.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15276.537521, 32353.450989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13055.468781, 35531.112183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13084.748444, 35044.325836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12597.229309, 35331.809753, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:21:08 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14.gif
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Mon May 27 04:21:35 2013] Mean detx,y = (12434.69, -7890.04) 
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Mon May 27 04:21:35 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 27 04:21:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src14.arf exists, delete to re-create