[Mon May 27 04:07:14 2013] Detection parameters:
  Position = (307.6, 276.1) = 15 1 49.63 -41 52 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.9 +/- 25.9
  Background counts = 288.9
  Rate = 0.002 +/- 0.0005

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 1.75'
[Mon May 27 04:11:20 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Mon May 27 04:11:20 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 167 for pass 0, mean size = 7.30"
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:15:33 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:33 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Mon May 27 04:15:33 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Mon May 27 04:15:33 2013] Giving source the simple spatial ID 157 for pass 1, mean size = 7.30"
[Mon May 27 04:17:20 2013] Spatial fit model total counts = 6419.080000, observed total counts = 6411.000000
[Mon May 27 04:17:20 2013] Offset between fit and detection position for source 105 = 1.327205 pixels
[Mon May 27 04:17:20 2013] Warning, changing simple spatial fit ID from 157 to 52
[Mon May 27 04:17:20 2013] 6375.334000 total counts/ 6164.040000 bgd. counts: snr = 2.691252
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 1.327205 pixels
  Position = (307.3, 277.4) = 15 1 49.75 -41 52 4.5
  Extent = 30.6 (30.4-61.1)" x 7.2 (3.8-19.2)", rotation angle = 90 (90-96) degrees
  Source counts = 211.3 +/- 79.8
  Background counts = 6164.0
  Rate = 0.003 +/- 0.001
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Mon May 27 04:17:21 2013] Source is asymmetric
[Mon May 27 04:17:21 2013] Source is confused with source 109
[Mon May 27 04:17:21 2013] Source is confused with source 107
[Mon May 27 04:17:21 2013] Source is confused with source 103
[Mon May 27 04:17:21 2013] Source is confused with source 95
[Mon May 27 04:17:21 2013] Source is confused with source 92
[Mon May 27 04:17:21 2013] Source is confused with source 90
[Mon May 27 04:17:21 2013] Source is confused with source 112
[Mon May 27 04:21:15 2013] XMMSAS src. selection expression = ellipse(26687.000000, 24087.645200, 1833.864053, 431.105412, 90.003000, X, Y)
[Mon May 27 04:21:15 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_src.reg
[Mon May 27 04:21:15 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (202, 172) - (413, 383)
[Mon May 27 04:21:15 2013] XMMSAS bgd. selection expression = annulus(26687.000000, 24087.645200, 3056.440088, 6112.880176, X, Y) && !ellipse(26315.040000, 28068.156000, 866.432025, 866.432025, 0.000000, X, Y) && !ellipse(30999.577209, 17697.691925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30631.769400, 18608.996000, 1059.408030, 1059.408030, 0.000000, X, Y) && !ellipse(30644.612800, 19732.882000, 1187.664034, 1187.664034, 0.000000, X, Y) && !ellipse(30442.204000, 20158.654000, 1554.320045, 1116.512032, 358.921000, X, Y) && !ellipse(30497.606800, 20985.523000, 1472.448042, 668.204019, 255.466000, X, Y) && !ellipse(18834.164000, 33324.464000, 3306.352095, 3306.352095, 0.000000, X, Y) && !ellipse(30871.670000, 16351.878000, 2284.600066, 2284.600066, 0.000000, X, Y) && !ellipse(26448.712000, 17940.376000, 424.427212, 424.427212, 0.000000, X, Y) && !ellipse(21703.500565, 31013.502838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.638000, 19882.104600, 1488.312043, 1488.312043, 0.000000, X, Y) && !ellipse(22032.926000, 30829.996000, 1469.432042, 1469.432042, 0.000000, X, Y) && !ellipse(28355.073200, 23068.509400, 1283.640037, 1283.640037, 0.000000, X, Y) && !ellipse(28997.900177, 22454.038849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.972000, 28474.962000, 1231.312035, 1231.312035, 0.000000, X, Y) && !ellipse(24074.947000, 25337.739000, 1063.544031, 1063.544031, 0.000000, X, Y) && !ellipse(29993.966000, 22800.120400, 1358.840039, 1358.840039, 0.000000, X, Y) && !ellipse(29210.798800, 24689.488200, 646.489619, 646.489619, 0.000000, X, Y) && !ellipse(23847.272000, 29758.200000, 2541.472073, 2541.472073, 0.000000, X, Y) && !ellipse(26482.681800, 21919.998000, 1316.320038, 1316.320038, 0.000000, X, Y) && !ellipse(18027.578000, 33821.332000, 3636.704105, 1369.344039, 32.219000, X, Y) && !ellipse(25790.716746, 24376.008400, 1129.944033, 1129.944033, 0.000000, X, Y) && !ellipse(26924.040863, 28490.242645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23872.466000, 29466.095200, 1281.160037, 607.711217, 31.266400, X, Y) && !ellipse(19866.092850, 26442.654846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.550200, 20460.677600, 1438.672041, 1438.672041, 0.000000, X, Y) && !ellipse(30228.792999, 21856.221832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.664000, 29399.126200, 1397.192040, 1397.192040, 0.000000, X, Y) && !ellipse(26557.726471, 26494.159760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.127686, 18128.183685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25383.952000, 17306.688000, 1587.776046, 1587.776046, 0.000000, X, Y) && !ellipse(27651.844000, 23934.899000, 1222.576035, 1222.576035, 0.000000, X, Y) && !ellipse(27652.722200, 27545.107000, 355.505610, 355.505610, 0.000000, X, Y) && !ellipse(26332.887970, 21619.476852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.726654, 20722.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.614000, 21560.092000, 1327.216038, 1327.216038, 0.000000, X, Y) && !ellipse(28171.024000, 24252.602000, 1185.568034, 1185.568034, 0.000000, X, Y) && !ellipse(19208.380000, 25844.965200, 1510.392043, 1510.392043, 0.000000, X, Y) && !ellipse(24185.394073, 30707.096527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.802887, 24737.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29551.072876, 21526.795090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21115.585400, 21280.789600, 1186.744034, 1186.744034, 0.000000, X, Y) && !ellipse(23184.278000, 28458.820000, 1270.736037, 1270.736037, 0.000000, X, Y) && !ellipse(25885.371400, 24549.744000, 1096.176032, 1096.176032, 0.000000, X, Y) && !ellipse(29251.556366, 19880.039719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.340000, 23093.960000, 1293.712037, 1293.712037, 0.000000, X, Y) && !ellipse(26486.192588, 18906.395200, 824.152024, 824.152024, 0.000000, X, Y) && !ellipse(29346.808197, 17607.268265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.000000, 21089.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.186000, 20306.402000, 1607.064046, 1607.064046, 0.000000, X, Y) && !ellipse(27398.186615, 17979.986588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20676.637451, 21521.627075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.476624, 24150.281311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22794.408295, 24796.767670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19935.202000, 19458.492000, 3171.744091, 3171.744091, 0.000000, X, Y) && !ellipse(27700.192000, 25126.212000, 2418.064070, 2418.064070, 0.000000, X, Y) && !ellipse(24565.249115, 23245.728760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.715118, 24894.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21161.344910, 30143.457703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.257034, 30112.189423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29498.999786, 24048.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.033325, 28826.472900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28283.190186, 29527.371429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23209.246000, 30085.552000, 1324.120038, 1324.120038, 0.000000, X, Y) && !ellipse(26961.317474, 23300.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.152832, 26340.938019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28532.885071, 28828.445587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.200000, 29121.470000, 1888.872054, 1888.872054, 0.000000, X, Y) && !ellipse(21541.531830, 18012.444321, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:21:15 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105.gif
[Mon May 27 04:21:37 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_bgd.evt exist, delete to re-create
[Mon May 27 04:21:37 2013] Mean detx,y = (-3419.24, -1509.17) 
[Mon May 27 04:21:37 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_bgd.img exist, delete to re-create
[Mon May 27 04:21:37 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_bgd.pi exist, delete to re-create
[Mon May 27 04:21:37 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Mon May 27 04:21:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Mon May 27 04:21:37 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src105.arf exists, delete to re-create