[Mon May 27 04:07:14 2013] Detection parameters:
  Position = (321.9, 278.0) = 15 1 44.06 -41 52 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.6 +/- 31.1
  Background counts = 232.7
  Rate = 0.005 +/- 0.0005

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 2.26'
[Mon May 27 04:11:20 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Mon May 27 04:11:20 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.799
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 7.56"
[Mon May 27 04:11:23 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src65.ximg exists
[Mon May 27 04:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src65.csv
[Mon May 27 04:11:23 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon May 27 04:11:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src65.csv
[Mon May 27 04:11:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon May 27 04:11:25 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Mon May 27 04:12:57 2013] Spatial fit model total counts = 3814.860000, observed total counts = 3815.000000
[Mon May 27 04:12:57 2013] Offset between fit and detection position for source 103 = 2.476365 pixels
[Mon May 27 04:12:57 2013] 3580.135000 total counts/ 3155.670000 bgd. counts: snr = 7.556072
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 2.476365 pixels
  Position = (323.0, 280.2) = 15 1 43.63 -41 51 52.5
  Extent = 15.1 (15.1-15.1)", rotation angle = 0
  Source counts = 424.5 +/- 59.8
  Background counts = 3155.7
  Rate = 0.007 +/- 0.001
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 102
[Mon May 27 04:15:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:33 2013] Initial guess for spatial extent in simple fitting = 15.11"
[Mon May 27 04:15:33 2013] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.013
[Mon May 27 04:15:33 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 15.11"
[Mon May 27 04:15:36 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src61.ximg exists
[Mon May 27 04:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src61.csv
[Mon May 27 04:15:36 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon May 27 04:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src61.csv
[Mon May 27 04:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:41 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon May 27 04:15:41 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon May 27 04:15:41 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon May 27 04:17:20 2013] Warning, spatial fit 61 centroid is now closest to src. 90
[Mon May 27 04:17:20 2013] Spatial fit model total counts = 3288.120000, observed total counts = 3285.000000
[Mon May 27 04:17:20 2013] Offset between fit and detection position for source 103 = 1.606621 pixels
[Mon May 27 04:17:20 2013] Warning, changing simple spatial fit ID from 61 to 68
[Mon May 27 04:17:20 2013] 3039.788000 total counts/ 2623.490000 bgd. counts: snr = 8.127643
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 1.606621 pixels
  Position = (324.4, 279.3) = 15 1 43.10 -41 51 56.2
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source counts = 416.3 +/- 55.1
  Background counts = 2623.5
  Rate = 0.007 +/- 0.0009
[Mon May 27 04:17:21 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:17:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:17:21 2013] Assessing source extent using major axis lower bound
[Mon May 27 04:17:21 2013] Source does appear to be extended
[Mon May 27 04:17:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:21:06 2013] XMMSAS src. selection expression = ellipse(28171.024000, 24252.602000, 889.176026, 889.176026, 0.000000, X, Y)
[Mon May 27 04:21:06 2013] Not overwriting source region fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_src.reg
[Mon May 27 04:21:06 2013] Extracting stamp from image fullrun_mos1_xmm0077340101_pi300-10000_cl_sm2.00.img.gz, (273, 228) - (375, 330)
[Mon May 27 04:21:06 2013] XMMSAS bgd. selection expression = annulus(28171.024000, 24252.602000, 1481.960043, 2963.920085, X, Y) && !ellipse(26315.040000, 28068.156000, 866.432025, 866.432025, 0.000000, X, Y) && !ellipse(30442.204000, 20158.654000, 1554.320045, 1116.512032, 358.921000, X, Y) && !ellipse(30497.606800, 20985.523000, 1472.448042, 668.204019, 255.466000, X, Y) && !ellipse(29869.638000, 19882.104600, 1488.312043, 1488.312043, 0.000000, X, Y) && !ellipse(28355.073200, 23068.509400, 1283.640037, 1283.640037, 0.000000, X, Y) && !ellipse(28997.900177, 22454.038849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29993.966000, 22800.120400, 1358.840039, 1358.840039, 0.000000, X, Y) && !ellipse(29210.798800, 24689.488200, 646.489619, 646.489619, 0.000000, X, Y) && !ellipse(26482.681800, 21919.998000, 1316.320038, 1316.320038, 0.000000, X, Y) && !ellipse(25790.716746, 24376.008400, 1129.944033, 1129.944033, 0.000000, X, Y) && !ellipse(28601.550200, 20460.677600, 1438.672041, 1438.672041, 0.000000, X, Y) && !ellipse(30228.792999, 21856.221832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.726471, 26494.159760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27651.844000, 23934.899000, 1222.576035, 1222.576035, 0.000000, X, Y) && !ellipse(27652.722200, 27545.107000, 355.505610, 355.505610, 0.000000, X, Y) && !ellipse(26332.887970, 21619.476852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27895.614000, 21560.092000, 1327.216038, 1327.216038, 0.000000, X, Y) && !ellipse(27954.802887, 24737.807434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29551.072876, 21526.795090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.371400, 24549.744000, 1096.176032, 1096.176032, 0.000000, X, Y) && !ellipse(28301.340000, 23093.960000, 1293.712037, 1293.712037, 0.000000, X, Y) && !ellipse(29227.000000, 21089.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.192000, 25126.212000, 2418.064070, 2418.064070, 0.000000, X, Y) && !ellipse(24565.249115, 23245.728760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29498.999786, 24048.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.000000, 24087.645200, 2445.152070, 574.807217, 90.003000, X, Y) && !ellipse(26961.317474, 23300.459534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25844.152832, 26340.938019, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 27 04:21:06 2013] Writing fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103.gif
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_src.evt and ../../xmm0077340101/products/events/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_bgd.evt exist, delete to re-create
[Mon May 27 04:21:35 2013] Mean detx,y = (-3941.60, -153.56) 
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_src.img and ../../xmm0077340101/products/images/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_bgd.img exist, delete to re-create
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_src_b10.pi.gz and ../../xmm0077340101/products/spectra/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_bgd.pi exist, delete to re-create
[Mon May 27 04:21:35 2013] Setting source spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Mon May 27 04:21:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Mon May 27 04:21:35 2013] ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_src.lc and ../../xmm0077340101/products/lightcurves/fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103_bgd.lc exist, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103.rmf exists, delete to re-create
[Mon May 27 04:22:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_pass1_cl_src103.arf exists, delete to re-create