[Mon May 27 04:07:14 2013] Detection parameters:
  Position = (326.9, 279.0) = 15 1 42.11 -41 51 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.8 +/- 33.1
  Background counts = 215.5
  Rate = 0.007 +/- 0.0006

[Mon May 27 04:07:29 2013] Off-axis axis estimate = 2.50'
[Mon May 27 04:11:20 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:11:20 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Mon May 27 04:11:20 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Mon May 27 04:11:20 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.68"
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src43.ximg exists
[Mon May 27 04:11:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src43.csv
[Mon May 27 04:11:22 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon May 27 04:11:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src43.csv
[Mon May 27 04:11:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon May 27 04:11:25 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon May 27 04:11:25 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Mon May 27 04:12:57 2013] Source 102 is offset by -7.141178 and -5.793276 pixels which is larger than
2 X fitted extent = 2.424676 x 2.424676, not incorporating fit results
[Mon May 27 04:12:58 2013] Vigneting correction estimate = 1.000000
[Mon May 27 04:12:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 04:12:58 2013] Assessing source extent using major
[Mon May 27 04:12:58 2013] Source does appear to be extended
[Mon May 27 04:12:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 04:12:58 2013] Source is confused with source 107
[Mon May 27 04:12:58 2013] Source is confused with source 103
[Mon May 27 04:15:32 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon May 27 04:15:32 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Mon May 27 04:15:32 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Mon May 27 04:15:32 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 7.68"
[Mon May 27 04:15:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src41.ximg exists
[Mon May 27 04:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src41.csv
[Mon May 27 04:15:35 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src41_1.ximg exists
[Mon May 27 04:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src41.csv
[Mon May 27 04:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 04:15:40 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Mon May 27 04:15:40 2013] fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Mon May 27 04:15:40 2013] Fit fullrun_mos1_xmm0077340101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Mon May 27 04:17:19 2013] Spatial fit model total counts = 6068.060000, observed total counts = 5542.000000
[Mon May 27 04:17:19 2013] Offset between fit and detection position for source 102 = 2.495375 pixels
[Mon May 27 04:17:19 2013] Warning, changing simple spatial fit ID from 41 to 33
[Mon May 27 04:17:19 2013] 5676.830039 total counts/ 5676.830000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 2.495375 pixels
  Position = (329.4, 278.6) = 15 1 41.15 -41 51 59.3
  Extent = 34.0 (34.0-67.9)", rotation angle = 0
  Source counts = 0.0 +/- 75.3
  Background counts = 5676.8
  Rate = 6e-10 +/- 0.001
  Deleting source due to low Poisson probability