[Thu Aug 23 17:23:05 2012] Detection parameters:
  Position = (317.3, 312.9) = 2 36 57.56 24 38 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7244.8 +/- 100.1
  Background counts = 12.4
  Rate = 0.3 +/- 0.004

[Thu Aug 23 17:23:06 2012] Off-axis axis estimate = 1.72'
[Thu Aug 23 18:04:40 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 18:04:40 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Aug 23 18:04:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Aug 23 18:04:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Aug 23 18:31:46 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 23 18:31:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 18:31:46 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 23 18:31:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 18:31:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 18:31:46 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 23 18:31:46 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 23 18:31:46 2012] Fit fullrun_mos2_xmm0075940101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 23 18:31:52 2012] Spatial fit model total counts = 8670.670000, observed total counts = 8355.000000
[Thu Aug 23 18:31:52 2012] Offset between fit and detection position for source 1 = 0.152175 pixels
[Thu Aug 23 18:31:52 2012] 7759.050000 total counts/ 3146.900000 bgd. counts: snr = 82.217062
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152175 pixels
  Position = (317.1, 312.9) = 2 36 57.60 24 38 52.0
  Extent = 4.6 (4.4-4.7)", rotation angle = 0
  Source counts = 4612.1 +/- 88.1
  Background counts = 3146.9
  Rate = 0.2 +/- 0.003
[Thu Aug 23 18:31:52 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 18:31:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 18:31:52 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 18:31:52 2012] Source does appear to be extended
[Thu Aug 23 18:31:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 18:59:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 18:59:27 2012] Initial guess for spatial extent in simple fitting = 4.56"
[Thu Aug 23 18:59:27 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.938
[Thu Aug 23 18:59:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.56"
[Thu Aug 23 19:10:48 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 23 19:10:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_src1.csv
[Thu Aug 23 19:10:48 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 23 19:10:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_src1.csv
[Thu Aug 23 19:10:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 19:10:48 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 23 19:10:48 2012] fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 23 19:10:48 2012] Fit fullrun_mos2_xmm0075940101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 23 19:10:54 2012] Spatial fit model total counts = 8564.880000, observed total counts = 8355.000000
[Thu Aug 23 19:10:54 2012] Offset between fit and detection position for source 1 = 0.015193 pixels
[Thu Aug 23 19:10:54 2012] 7988.050000 total counts/ 3424.980000 bgd. counts: snr = 77.970104
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015193 pixels
  Position = (317.1, 312.9) = 2 36 57.60 24 38 52.0
  Extent = 4.5 (4.4-4.6)", rotation angle = 0
  Source counts = 4563.1 +/- 89.4
  Background counts = 3425.0
  Rate = 0.2 +/- 0.003
[Thu Aug 23 19:10:54 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 19:10:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 19:10:54 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 19:10:54 2012] Source does appear to be extended
[Thu Aug 23 19:10:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 19:26:09 2012] Counts = 4563.070000, rescaling region sizes by 2.000000
[Thu Aug 23 19:26:09 2012] XMMSAS src. selection expression = ellipse(27540.496900, 27176.092000, 545.146816, 545.146816, 0.000000, X, Y)
[Thu Aug 23 19:26:09 2012] Writing source region out to fullrun_mos2_xmm0075940101_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 23 19:26:09 2012] Extracting stamp from image fullrun_mos2_xmm0075940101_pi300-10000_cl_sm2.00.img.gz, (286, 282) - (348, 344)
[Thu Aug 23 19:26:09 2012] XMMSAS bgd. selection expression = annulus(27540.496900, 27176.092000, 1817.156052, 3634.312105, X, Y) && !ellipse(26787.228123, 27113.518465, 430.324504, 391.503472, 9.053648, X, Y)
[Thu Aug 23 19:26:09 2012] Writing fullrun_mos2_xmm0075940101_pi300-10000_pass1_cl_src1.gif
[Thu Aug 23 19:26:12 2012] Mean detx,y = (-56.51, -9.41) 
[Thu Aug 23 19:26:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 19:26:33 2012] grppha failed
[Thu Aug 23 19:26:33 2012] Setting source spectrum file to fullrun_mos2_xmm0075940101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 19:26:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0075940101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 23 19:29:14 2012] Updating aperture counts using extracted products
[Thu Aug 23 19:29:14 2012] Error reading totcts from fullrun_mos2_xmm0075940101_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 19:29:14 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 19:29:15 2012] Source 1 has no response, skipping
[Thu Aug 23 19:29:16 2012] xmm0075940101/analysis//spectral/fullrun_mos2_xmm0075940101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete