[Mon Jul 23 17:20:40 2012] Detection parameters:
  Position = (307.6, 281.2) = 19 15 56.59 4 48 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.5 +/- 17.2
  Background counts = 51.2
  Rate = 0.005 +/- 0.0007

[Mon Jul 23 17:20:40 2012] Off-axis axis estimate = 1.41'
[Mon Jul 23 17:22:55 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 17:22:55 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Mon Jul 23 17:22:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.091
[Mon Jul 23 17:22:55 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.14"
[Mon Jul 23 18:51:35 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jul 23 18:51:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_src29.csv
[Mon Jul 23 18:51:35 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jul 23 18:51:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_src29.csv
[Mon Jul 23 18:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 18:51:36 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jul 23 18:51:36 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jul 23 18:51:36 2012] Fit fullrun_pn_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Jul 23 19:37:59 2012] Spatial fit model total counts = 732.796000, observed total counts = 733.000000
[Mon Jul 23 19:37:59 2012] Offset between fit and detection position for source 29 = 0.363255 pixels
[Mon Jul 23 19:37:59 2012] 748.064900 total counts/ 690.511000 bgd. counts: snr = 2.190229
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.363255 pixels
  Position = (307.5, 281.6) = 19 15 56.60 4 48 43.4
  Extent = 3.9 (3.1-5.1)", rotation angle = 0
  Source counts = 57.6 +/- 27.4
  Background counts = 690.5
  Rate = 0.002 +/- 0.001
[Mon Jul 23 19:37:59 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 19:37:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 19:37:59 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 19:37:59 2012] Source does appear to be extended
[Mon Jul 23 19:37:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 19:37:59 2012] Source is confused with source 28
[Mon Jul 23 19:38:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:38:14 2012] Initial guess for spatial extent in simple fitting = 3.88"
[Mon Jul 23 19:38:14 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.160
[Mon Jul 23 19:38:14 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 3.88"
[Mon Jul 23 20:38:31 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_src28.ximg exists
[Mon Jul 23 20:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_src28.csv
[Mon Jul 23 20:38:31 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Jul 23 20:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_src28.csv
[Mon Jul 23 20:38:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 20:38:31 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Jul 23 20:38:31 2012] fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Jul 23 20:38:31 2012] Fit fullrun_pn_xmm0075140501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Jul 23 21:18:46 2012] Spatial fit model total counts = 733.000000, observed total counts = 733.000000
[Mon Jul 23 21:18:46 2012] Offset between fit and detection position for source 29 = 0.006252 pixels
[Mon Jul 23 21:18:46 2012] 700.875400 total counts/ 640.875000 bgd. counts: snr = 2.370104
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.006252 pixels
  Position = (307.6, 281.6) = 19 15 56.60 4 48 43.4
  Extent = 3.9 (3.1-5.2)", rotation angle = 0
  Source counts = 60.0 +/- 26.5
  Background counts = 640.9
  Rate = 0.002 +/- 0.0009
[Mon Jul 23 21:18:46 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:18:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:18:46 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 21:18:46 2012] Source does appear to be extended
[Mon Jul 23 21:18:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:19:01 2012] XMMSAS src. selection expression = ellipse(26708.537400, 24448.901600, 233.863207, 233.863207, 0.000000, X, Y)
[Mon Jul 23 21:19:01 2012] Writing source region out to fullrun_pn_xmm0075140501_pi300-10000_pass1_cl_src29_src.reg
[Mon Jul 23 21:19:01 2012] Extracting stamp from image fullrun_pn_xmm0075140501_pi300-10000_cl_sm2.00.img.gz, (294, 268) - (321, 295)
[Mon Jul 23 21:19:01 2012] XMMSAS bgd. selection expression = annulus(26708.537400, 24448.901600, 389.772011, 779.544022, X, Y) && !ellipse(26865.802000, 25162.824000, 1081.352031, 1081.352031, 0.000000, X, Y) && !ellipse(27713.660800, 22648.544000, 1142.904033, 1142.904033, 0.000000, X, Y)
[Mon Jul 23 21:19:01 2012] Writing fullrun_pn_xmm0075140501_pi300-10000_pass1_cl_src29.gif
[Mon Jul 23 21:36:48 2012] Mean detx,y = (-171.35, 2883.94) 
[Mon Jul 23 21:36:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 21:37:03 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 21:37:03 2012] Setting source spectrum file to fullrun_pn_xmm0075140501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 23 21:37:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0075140501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jul 23 22:05:13 2012] Not generating rmf since there are only 60 counts
[Mon Jul 23 22:05:13 2012] rmf not generated due to insufficient counts
[Mon Jul 23 22:39:14 2012] Updating aperture counts using extracted products
[Mon Jul 23 22:39:14 2012] Error reading totcts from fullrun_pn_xmm0075140501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 23 22:39:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 22:39:14 2012] Using photon index=1.80, rate=0.00213, arf fullrun_pn_xmm0075140501_pi300-10000_pass1_cl_src29.arf
[Mon Jul 23 22:39:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 22:39:14 2012] Updating source flux to 9.2e-15
[Mon Jul 23 22:39:45 2012] Flag c found in src. 29 procflags, skipping spectral fitting
[Mon Jul 23 22:39:45 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting