[Mon Jul 23 17:21:15 2012] Detection parameters:
  Position = (450.1, 213.2) = 19 15 15.12 4 43 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.6 +/- 27.3
  Background counts = 13.5
  Rate = 0.02 +/- 0.0009

[Mon Jul 23 17:21:15 2012] Off-axis axis estimate = 12.61'
[Mon Jul 23 19:16:48 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:16:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 19:16:48 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Mon Jul 23 19:16:48 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.043
[Mon Jul 23 19:16:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.74"
[Mon Jul 23 19:37:51 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 19:37:51 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 19:37:51 2012] Fit fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jul 23 19:37:51 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 19:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 19:37:51 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 19:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 19:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:38:06 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.900715 pixels away
[Mon Jul 23 19:38:06 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 19:38:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 19:38:06 2012] Assessing source extent using major
[Mon Jul 23 19:38:06 2012] Source does appear to be extended
[Mon Jul 23 19:38:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:00:10 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 21:00:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 21:00:10 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Mon Jul 23 21:00:10 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.043
[Mon Jul 23 21:00:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.74"
[Mon Jul 23 21:18:39 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 21:18:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 21:18:39 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 21:18:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 21:18:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:18:39 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 21:18:39 2012] fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 21:18:39 2012] Fit fullrun_mos2_xmm0075140501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 21:18:52 2012] Spatial fit model total counts = 784.953000, observed total counts = 731.000000
[Mon Jul 23 21:18:52 2012] Offset between fit and detection position for source 1 = 0.265939 pixels
[Mon Jul 23 21:18:52 2012] 793.243000 total counts/ 460.844000 bgd. counts: snr = 15.483985
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.265939 pixels
  Position = (449.9, 213.4) = 19 15 15.17 4 43 46.5
  Extent = 5.9 (5.3-6.8)", rotation angle = 0
  Source counts = 332.4 +/- 28.2
  Background counts = 460.8
  Rate = 0.01 +/- 0.0009
[Mon Jul 23 21:18:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:18:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:18:52 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 21:18:52 2012] Source does appear to be extended
[Mon Jul 23 21:18:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 22:25:14 2012] XMMSAS src. selection expression = ellipse(39093.452400, 18513.560960, 355.667410, 355.667410, 0.000000, X, Y)
[Mon Jul 23 22:25:14 2012] Writing source region out to fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 22:25:14 2012] Extracting stamp from image fullrun_mos2_xmm0075140501_pi300-10000_cl_sm2.00.img.gz, (429, 193) - (470, 234)
[Mon Jul 23 22:25:14 2012] XMMSAS bgd. selection expression = annulus(39093.452400, 18513.560960, 592.779017, 1185.558034, X, Y) && !ellipse(37039.622833, 20431.006088, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 22:25:14 2012] Writing fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 22:25:16 2012] Mean detx,y = (-12510.71, -8003.93) 
[Mon Jul 23 22:25:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 22:25:31 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 22:25:32 2012] Setting source spectrum file to fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 22:25:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 22:39:14 2012] Updating aperture counts using extracted products
[Mon Jul 23 22:39:14 2012] Error reading totcts from fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 22:39:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 22:39:15 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 22:39:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 22:39:15 2012] Updating source flux to 2.8e-13
[Mon Jul 23 22:39:45 2012] Reading fit data from xmm0075140501/analysis//spectral/fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 22:39:45 2012] Spectral fit parameter nH value = 4.12158e+21
[Mon Jul 23 22:39:45 2012] Spectral fit parameter PhoIndex value = 1.4625
[Mon Jul 23 22:39:45 2012] Failed to get F(0.3-8.0) from xmm0075140501/analysis//spectral/fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 22:39:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 22:39:45 2012] Using Nh = 4.1e+21, photon index=1.46, rate=0.0107, arf fullrun_mos2_xmm0075140501_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 22:39:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 22:39:45 2012] Updating source flux to 4.5e-13