[Mon Jul 23 17:20:58 2012] Detection parameters:
  Position = (307.5, 281.7) = 19 15 56.62 4 48 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.1 +/- 10.5
  Background counts = 14.9
  Rate = 0.002 +/- 0.0004

[Mon Jul 23 17:20:58 2012] Off-axis axis estimate = 1.38'
[Mon Jul 23 18:51:36 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 18:51:36 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Jul 23 18:51:36 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Mon Jul 23 18:51:36 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.12"
[Mon Jul 23 19:16:48 2012] fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jul 23 19:16:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_src14.csv
[Mon Jul 23 19:16:48 2012] fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jul 23 19:16:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_src14.csv
[Mon Jul 23 19:16:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:16:48 2012] fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jul 23 19:16:48 2012] fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jul 23 19:16:48 2012] Fit fullrun_mos1_xmm0075140501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Jul 23 19:38:03 2012] Source 15 is offset by 7.005189 and 6.207722 pixels which is larger than
2 X fitted extent = 2.073274 x 2.073274, not incorporating fit results
[Mon Jul 23 19:38:03 2012] Spatial fit model total counts = 248.762000, observed total counts = 248.000000
[Mon Jul 23 19:38:03 2012] Offset between fit and detection position for source 15 = 0.326878 pixels
[Mon Jul 23 19:38:03 2012] Warning, changing simple spatial fit ID from 14 to 15
[Mon Jul 23 19:38:03 2012] 240.882200 total counts/ 224.414000 bgd. counts: snr = 1.099312
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.326878 pixels
  Position = (307.5, 281.4) = 19 15 56.62 4 48 42.7
  Extent = 1.8" x 1.8", rotation angle = 0
  Source counts = 16.5 +/- 15.5
  Background counts = 224.4
  Rate = 0.0005 +/- 0.0005
  Deleting source due to low Poisson probability