[Fri May 31 23:22:36 2013] Detection parameters:
  Position = (416.1, 293.1) = 19 13 41.74 4 54 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.0 +/- 14.2
  Background counts = 52.1
  Rate = 0.004 +/- 0.0008

[Fri May 31 23:22:38 2013] Off-axis axis estimate = 8.54'
[Fri May 31 23:23:28 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:28 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Fri May 31 23:23:28 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.028
[Fri May 31 23:23:28 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 10.70"
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src48.ximg exists
[Fri May 31 23:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src48.csv
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri May 31 23:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src48.csv
[Fri May 31 23:23:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:32 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri May 31 23:23:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri May 31 23:23:32 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri May 31 23:23:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src48.csv
[Fri May 31 23:23:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:52 2013] Warning, spatial fit 48 centroid is now closest to src. 52
[Fri May 31 23:23:52 2013] Spatial fit model total counts = 760.356000, observed total counts = 760.000000
[Fri May 31 23:23:52 2013] Offset between fit and detection position for source 50 = 0.591949 pixels
[Fri May 31 23:23:52 2013] Warning, changing simple spatial fit ID from 48 to 51
[Fri May 31 23:23:52 2013] 759.377000 total counts/ 729.926000 bgd. counts: snr = 1.090086
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.591949 pixels
  Position = (416.0, 293.7) = 19 13 41.75 4 54 1.5
  Extent = 2.7" x 2.7", rotation angle = 0
  Source counts = 29.5 +/- 27.6
  Background counts = 729.9
  Rate = 0.001 +/- 0.0009
  Deleting source due to low Poisson probability