[Fri May 31 23:22:35 2013] Detection parameters:
  Position = (394.9, 330.2) = 19 13 47.90 4 56 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 14.2
  Background counts = 48.8
  Rate = 0.004 +/- 0.0007

[Fri May 31 23:22:38 2013] Off-axis axis estimate = 7.36'
[Fri May 31 23:23:28 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:28 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Fri May 31 23:23:28 2013] source mask rpix=2.3, npix_max = 31, mask sum = 34, frac = 1.066
[Fri May 31 23:23:28 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 10.11"
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src36.ximg exists
[Fri May 31 23:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src36.csv
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri May 31 23:23:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src36.csv
[Fri May 31 23:23:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:32 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri May 31 23:23:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri May 31 23:23:32 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri May 31 23:23:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri May 31 23:23:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:52 2013] Spatial fit model total counts = 834.208000, observed total counts = 828.000000
[Fri May 31 23:23:52 2013] Offset between fit and detection position for source 38 = 0.316308 pixels
[Fri May 31 23:23:52 2013] Warning, changing simple spatial fit ID from 36 to 33
[Fri May 31 23:23:52 2013] 809.268400 total counts/ 788.329000 bgd. counts: snr = 0.745780
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.316308 pixels
  Position = (394.6, 330.3) = 19 13 47.98 4 56 40.7
  Extent = 4.4 (2.6-7.6)", rotation angle = 0
  Source counts = 20.9 +/- 28.4
  Background counts = 788.3
  Rate = 0.0007 +/- 0.0009
  Deleting source due to low Poisson probability