[Fri May 31 23:22:32 2013] Detection parameters:
  Position = (465.8, 412.0) = 19 13 27.25 5 2 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.5 +/- 15.8
  Background counts = 31.9
  Rate = 0.004 +/- 0.0005

[Fri May 31 23:22:38 2013] Off-axis axis estimate = 14.66'
[Fri May 31 23:23:28 2013] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 23:23:28 2013] Initial guess for spatial extent in simple fitting = 13.76"
[Fri May 31 23:23:28 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.043
[Fri May 31 23:23:28 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.76"
[Fri May 31 23:23:29 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 31 23:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src3.csv
[Fri May 31 23:23:29 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 31 23:23:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src3.csv
[Fri May 31 23:23:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:31 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 31 23:23:31 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 31 23:23:31 2013] Fit fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 31 23:23:52 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.670465 pixels away
[Fri May 31 23:23:52 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:52 2013] Assessing source extent using major
[Fri May 31 23:23:52 2013] Source does appear to be extended
[Fri May 31 23:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:24 2013] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 23:24:24 2013] Initial guess for spatial extent in simple fitting = 13.76"
[Fri May 31 23:24:24 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.043
[Fri May 31 23:24:24 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 13.76"
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 31 23:24:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src3.csv
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 31 23:24:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src3.csv
[Fri May 31 23:24:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 31 23:24:25 2013] Fit fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 31 23:24:43 2013] Spatial fit model total counts = 585.339000, observed total counts = 556.000000
[Fri May 31 23:24:43 2013] Offset between fit and detection position for source 3 = 0.390985 pixels
[Fri May 31 23:24:43 2013] 576.905500 total counts/ 480.312000 bgd. counts: snr = 4.407438
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.390985 pixels
  Position = (465.5, 412.2) = 19 13 27.36 5 2 36.7
  Extent = 8.2 (6.2-11.4)", rotation angle = 0
  Source counts = 96.6 +/- 24.0
  Background counts = 480.3
  Rate = 0.003 +/- 0.0008
[Fri May 31 23:24:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:43 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:24:43 2013] Source does appear to be extended
[Fri May 31 23:24:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:25:13 2013] XMMSAS src. selection expression = ellipse(40445.764920, 35809.648800, 490.380014, 490.380014, 0.000000, X, Y)
[Fri May 31 23:25:13 2013] Not overwriting source region fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src.reg
[Fri May 31 23:25:13 2013] Extracting stamp from image fullrun_pn_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (437, 384) - (494, 440)
[Fri May 31 23:25:13 2013] XMMSAS bgd. selection expression = annulus(40445.764920, 35809.648800, 817.300024, 1634.600047, X, Y)
[Fri May 31 23:25:13 2013] Writing fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3.gif
[Fri May 31 23:25:15 2013] ../../xmm0075140401/products/events/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0075140401/products/events/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri May 31 23:25:15 2013] Mean detx,y = (13082.41, -8933.59) 
[Fri May 31 23:25:15 2013] ../../xmm0075140401/products/images/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src.img and ../../xmm0075140401/products/images/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri May 31 23:25:15 2013] ../../xmm0075140401/products/spectra/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri May 31 23:25:15 2013] Setting source spectrum file to fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 31 23:25:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 31 23:25:15 2013] ../../xmm0075140401/products/lightcurves/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri May 31 23:49:51 2013] Not generating rmf since there are only 96 counts
[Fri May 31 23:49:51 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:25:19 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:19 2013] Total counts from fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 227.00
[Sat Jun  1 00:25:19 2013] Total counts from fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 694.00
[Sat Jun  1 00:25:19 2013] Got source and background scale factors 755200.000000, 3995260.000000
[Sat Jun  1 00:25:19 2013] User source parameters:
  Position = (465.5, 412.2) = 19 13 27.36 5 2 36.7
  Extent = 8.2 (6.2-11.4)", rotation angle = 0
  Source aperture counts = 95.8 +/- 16.1
  Background aperture counts = 131.2
  Rate = 0.003 +/- 0.0005

[Sat Jun  1 00:25:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:32 2013] Using photon index=1.80, rate=0.00315, arf fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3.arf
[Sat Jun  1 00:25:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:32 2013] Updating source flux to 4.4e-14
[Sat Jun  1 00:26:02 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 00:26:14 2013] xmm0075140401/analysis//spectral/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete