[Fri May 31 23:22:33 2013] Detection parameters:
  Position = (406.0, 349.9) = 19 13 44.66 4 58 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 14.9
  Background counts = 44.9
  Rate = 0.004 +/- 0.0008

[Fri May 31 23:22:38 2013] Off-axis axis estimate = 8.65'
[Fri May 31 23:23:28 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:28 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Fri May 31 23:23:28 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Fri May 31 23:23:28 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.75"
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 31 23:23:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src24.csv
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 31 23:23:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src24.csv
[Fri May 31 23:23:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:31 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 31 23:23:31 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 31 23:23:31 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 31 23:23:31 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 31 23:23:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:52 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.358334 pixels away
[Fri May 31 23:23:52 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:52 2013] Assessing source extent using major
[Fri May 31 23:23:52 2013] Source does appear to be extended
[Fri May 31 23:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:24 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:24 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Fri May 31 23:24:24 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.019
[Fri May 31 23:24:24 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 10.75"
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 31 23:24:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src18.csv
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 31 23:24:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src18.csv
[Fri May 31 23:24:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:26 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 31 23:24:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May 31 23:24:26 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 31 23:24:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May 31 23:24:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:43 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.257986 pixels away
[Fri May 31 23:24:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:43 2013] Assessing source extent using major
[Fri May 31 23:24:43 2013] Source does appear to be extended
[Fri May 31 23:24:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:25:14 2013] XMMSAS src. selection expression = ellipse(35274.609802, 30391.878174, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 23:25:14 2013] Not overwriting source region fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src.reg
[Fri May 31 23:25:14 2013] Extracting stamp from image fullrun_pn_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (369, 312) - (444, 387)
[Fri May 31 23:25:14 2013] XMMSAS bgd. selection expression = annulus(35274.609802, 30391.878174, 1087.500000, 2175.000000, X, Y) && !ellipse(33571.267000, 32854.856800, 405.092012, 405.092012, 0.000000, X, Y) && !ellipse(33820.787445, 30978.403351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32699.478000, 29384.096000, 1515.672044, 1515.672044, 0.000000, X, Y) && !ellipse(32984.763800, 28918.618000, 1532.720044, 1532.720044, 0.000000, X, Y) && !ellipse(34133.459625, 27456.565399, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 23:25:14 2013] Writing fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25.gif
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/events/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0075140401/products/events/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Fri May 31 23:25:18 2013] Mean detx,y = (8052.06, -3303.18) 
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/images/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src.img and ../../xmm0075140401/products/images/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/spectra/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Fri May 31 23:25:18 2013] Setting source spectrum file to fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri May 31 23:25:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/lightcurves/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Fri May 31 23:56:16 2013] Not generating rmf since there are only 83 counts
[Fri May 31 23:56:16 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:25:24 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:24 2013] Total counts from fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 455.00
[Sat Jun  1 00:25:24 2013] Total counts from fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_bgd.pi.gz = 2506.00
[Sat Jun  1 00:25:24 2013] Got source and background scale factors 1190616.000000, 7291755.000000
[Sat Jun  1 00:25:24 2013] User source parameters:
  Position = (406.0, 349.9) = 19 13 44.66 4 58 5.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.8 +/- 22.3
  Background aperture counts = 409.2
  Rate = 0.001 +/- 0.0007

[Sat Jun  1 00:25:24 2013] Updating counts from extracted products
[Sat Jun  1 00:25:24 2013] Set source signif. to 45.81/20.23 = 2.26
[Sat Jun  1 00:25:33 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:33 2013] Using photon index=1.80, rate=0.0015, arf fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25.arf
[Sat Jun  1 00:25:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:33 2013] Updating source flux to 1.1e-14
[Sat Jun  1 00:26:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 00:26:14 2013] xmm0075140401/analysis//spectral/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete